Industrial Seals Dealers in Lbs Marg, Mumbai

WE MASTERS IN OFFERING WIDE RANGE OF OIL SEALS FOR ALL KIND & TYPES OF INDUSTRIAL GEARBOXES & PUMPS WHICH ARE KNOWN FOR THEIR FEATURES LIKE DURABILITY & PRECISION.   WE PROVIDE OIL SEALS WHICH ARE MANUFACTURED FROM FINEST QUALITY OF RAW MATERIAL LEADING TO LONG LIFE AND HIGH PERFORMANCE AT REASONABLE PRICES.   OIL SEALS EXCLUSIVELY OFFERRED ARE FOR BRANDED INDUSTRIAL GEARBOXES & PUMPS., THE FEW OF WHICH HAS BEEN LISTED BELOW :    BRANDS : ● CPEC GEARBOXES ● RADICON GREAVES GEARBOXES ● ELECON GEARBOXES ● SHACON GEARBOXES ● OTHER GEARBOXES    TYPES : ● RUBBER & MECHANICAL OIL SEALS.    SIZES : ● CPEC (R, RV MODEL) : 11, 17, 22, 30, 35, 40, 50, 60, 70, 80, 90, 100, 120, 140, 170. ● RADICON GREAVES : 112, 162, 200, 237, 287, 337, 4, 5, 6, 7, 8, 9, 10.5, 10”, 12” , 14”, 17”. ● ELECON : 1 5/8, 1 ¾, 2, 2 ½, 3, 3 ½, 4, 5, 6, 7, 8, 9, 10.5, 10”, 12” , 14”, 17”.    RATIO : ● MIN. 5 : 1 to MAX. 70 : 1.   NOTE : WE PROVIDE SPARES FOR GEARBOXES AS PER STANDARD & NON STANDARD REQUIREMENTS. 

• Material: Sealing Laminate /
• Cap Type: Induction Type Caps
• Grade: Commercial
• Capacity: 10 ml to 200 L
• Diameter: 0.4 to 2 mm
• Thickness: 2 mm

• No of Nozzles per DCP module: 27 (max.)
• Nozzle Spacing: 1.5 meters
• Rim Seal protected from one set: 40 meters

Floating roof tanks are considered to be the safest hydrocarbon storage vessel with respect to its vapor suppression ability. Even in these tanks, there exists an area, which exposes the hydrocarbon vapor to air, which is known as rim seal area. The SHOOTFIRE Fire Protection System for Floating Roof Tank is a fully automated extinguishing system. It is specifically designed and manufactured for extreme fast detection and extinction of any type of rim seal fires as per the National & International Safety Standards.

Corner joints & T-Joints for Strong mechanical joineries,Single point & Multi point locking,Available in Anodized and Powder coated (Various color of RAL code)

We also market Container Seals which have lengths of 70-90 mm. This container seal is plastic coated. Locking Rod is forged from Carbon Steel and the Locking Body may be stamped with your company's name logo and serial numbers. This container seal can be used on Marine Containers, Railway Wagons, Airline Containers, Truck Containers etc etc.

AUDCO (L&T) Butterfly Valve PN 16 (Slim Seal) Gear Operated Body: Cast Iron Liner: Nitrile Rubber Disc: CI Coated with Nylon Shaft: CS Operation: Worm Gear Operated.

silicon oil seal, Neoprene Sponge Gasket, Silicon Sponge Gasket

• Color: white
• Material: EPE
• Thickness: 1/1.5/2 mm
• Usage/Application: Pharma Industry
• Grade: Food Grade
• Dimensions: 8-150 mm(Dia)

Use for sealing of rotating shafts, above all in engineering construction and construction of domestic machines, and in the motor vehicle industry. Varied types and designs for various requirements and different instances of installation. Solutions specific to customer within the comprehensive Standard Range; upon enquiry Cassette seals, valve stem seals, damper seals and guide sleeves for gearboxes 'O' RING, OIL SEALS Ready to fit Sealing elements for leakproof sealing in Mechanical Engineering Instruments, Constructions, Domestic Appliances Industries and Automotive Control Engineering. PNEUMATICS THE USE OF PNEUMATIC SEALS - INTRODUCTION Pneumatics, which is one area of fluid technology, is the science of the behaviour of gases. The term pneumatics, which is derived from the Greek pneuma, is today mostly considered to be the transfer of energy by compressed air. Pneumatic drives and actuations, used to an increasing extent for the mechanisation and automation of production processes, are essentially constructed from valves and cylinders. The working of pneumatic equipment requires the sealing of volumes of air under pressure. Pneumatic seals are divided into cylinder seals and valve seals. The differentiated sub-division of valve seals, similar to the classification used for cylinder seals, would not be sensible. Valve seals are special seals which conform to the differing valve constructions of individual manufacturers. HYDRAULIC SEALS USE OF HYDRAULIC SEALS Different requirements and loads in numerous instances have led to the development of various types of seals. Hydraulic seals can be categorised according to their function and design Moreover, hydraulic seals are sub-divided into seals with a symmetrical cross-section and such with an asymmetrical cross-section. Asymmetrical seals are designed with interference on the entire axial width of the static diameter to achieve a firm seat in the groove. Therefore, the correct pre-load on the dynamic diameter is only reached after fitting into the housing SHAFT SEALS These Shaft Seals prevent the excessive wear and heat buildup at the shaft often caused by internal pressure. Economical seals are reliable at pressures up to 300 psi. Built with touch fluoroelastomer sealing element, strong metal case and large, pressure-activated PTFE anti-friction element. Can be used in a broad range of equipment, in rotary or reciprocating motion.    

• Material: Rubber
• Thickness: 20 mm
• Usage/Application: Oil
• Size: 4 inch
• Hardness: 60 HRC

By keeping customer’s demands and requirements in our mind, we are offering them a desirable range of GC Septas. Our GC Septas are made up of quality assured material and also tested thoroughly at many stages for their quality assurance. pack 100

Plastic Seals

• Material: Rubber
• Size: Customized
• Hardness: 40-70 Shore A

  ALUMINUM FOIL We are enlisted as top company involved in offering a wide gamut of Aluminium Cap Liners. Our products are manufactured using best quality material which we sourced from the trusted vendors of the industry. These are available in market in various sizes and are well known due to their fine finishing and superior quality. Apart from this, these can be availed at market leading prices. Printed Aluminium Foil in Reel Form as per requirement can be supplied.

• Material: HDPE
• Color: All colours
• Dimensions: 28 MM Seal Cap
• Neck Size: 2'8

compact seals, crimp cap, sealing profile

We offer a broad range of qualitative Drum Capseals - Printed, which is used in various industries such as, oil, lube, chemical, pharmaceutical industries and many more . We offer these Printed Drum Cap Seals in size 50 mm and 20 mm also widely known as 2", 3/4", 1", 3", 4", 7", 72 mm, 75mm, 80mm, & 85mm. We also offer customized solutions for our respected clients in order to cater their requirements. Our product is made from finest quality of 'Tin free steel & Plastisol' in order to achieve the best crimping / sealing results. We can create a new design for each of your products or use your existing artwork – a company logo or even a photograph! These labels can be used on any of our capseals or cap with a flat surface. We know your brand is important to you, and our new laser printing system from Kirao means you’ll get perfect color reduction and the highest quality every time.

Window Seals, Epdm Gaskets, Foam Tapes, Gaskets, removable protection pads

The mouth of wide neck bottles can be sealed with a highly secure induction wad using an induction sealing machine. Secure Induction Wads incorporate a highly secure hologram image on the viewable side of the seal. This can be delivered with foam of board backing.

drum seal, Jute, plastic sheet, Packing Materials, Packaging Materials