Industrial Seals Dealers in Midc, Mumbai

MASS' make diaphragm sealed gauges are designed for systems needing contact surface that are rigorously cleaned and totally safe. The function of diaphragm is to isolate the pressure gauge from the process fluid, preventing bacteria developing inside pressure gauges sensing element. The advantage of the flush diaphragm gauges is easy to clean and quick release coupling.

Modified or OEM seals with latest technology and sealing profile are available for rotary application like gear boxes, motors, pumps, machine can be supplied for diameters up to 2500mm and shaft speed up to 35 m/sec. seals are manufacture in different elastomers and thermoplastics as VITON, HNBR, PTFE, PEEK, etc among more than 135 different material compounds. Split seals can be supplied to reduce downtime while replacing seals. United Van Der Horst offers seals with special spring designs for optimum contact force for effective sealing which results in lower wear rate and long retention of sealing action.

'MASS' make diaphragm sealed gauges are designed for systems needing contact surface that are rigorously cleanedand totally safe. The function of diaphragm is to isolate the pressure gauge from the process fluid, preventing bacteria developing inside pressure gauges sensing element. The advantage of the flush diaphragm gauges is easy to clean and quick release coupling. The following connection systems can be provided.   1. Triclamp systems.2. SMS with union nut and SMS with male thread.3. Homogeniserwithflange.

A Magnetic seal comprises of a sealed chamber (Shroud), which contains a rotating Inner Shaft, which is embedded with powerful Inner Magnets. This inner shaft is supported on Upper and Lower Bearings. These are special Bearings, capable of withstanding harsh environments present inside the Reactor. A special barrier filter prevents dust from entering the Bearing Area. The output shaft of MotorGearbox assembly is locked on to an Outer Rotor, which is fitted with an Outer Magnet Assembly. When the Motor is switched on, the Outer Rotor Rotates, and magnetic flux causes the inner shaft to rotate synchronously with the Outer Rotor. Top Entry Magnetic Seals are the safest method for sealing agitated Reactors. Their applications include High Pressure Autoclaves such as Hydrogenators, as well as Reactors used for handling sensitive or hazardous products.

Auto Cooling Pump Seal – page under construction APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & 

• Country of Origin: India
• Type: Aluminium Foil Lid, Aluminium Foil Paper
• Material: Aluminium
• Thickness: 0.02 Mm - 0.06 Mm
• Application: For Packaging Food Products, For Packing Food
• Color: Multicolor, Silver
• Feature: Eco Friendly, Good Quality, High Strength, Keeps Food Warm
• Pattern: Plain.Printed
• Texture: Smooth, Embossed
• Brand Name: LIDON By PAPSCO
• Color: Multi

Our presented range of Hologram Induction Wads is fabricated in order to seal various HDPE and PET containers. These wads are used for sealing of both glass and plastic containers (PE,PVC & PET).These are further tailored with holographic image that provide unique authentication along with security content.   FEATURES:- 1.These wads helps to preserve quality and purity of content. 2.It prevents leakages in bottles 3.It is nontoxic and having great sealing ability. 4.Manufactured in clean room and in dust free environment. 5.All material  manufactured, is of food grade standard   AVAILIBILTY:- Available in ranges of – Thickness – 0.5 – 2.00 mm Diameter – 15 mm - 120 mm USED IN INDUSTRIES: - chemical, pharmaceuticals, food and beverage, lubricant and beauty care industry.

• Material: Rubber
• Color: Black
• Country of Origin: Made in India
• Usage/Application: Industrial
• Size: 12 mm and above
• Brand: maxcare
• Model Name/Number: rubber bellow mechanical seal

Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. The organization has laid its foundation stone in Mumbai(India) and covers a wide area for catering to the customers.   Feature : Uni Directinal Dimension Range - 8mm to 45mm Temperature Range - 100oC MAX Faces - SIC, TC, Carbon Elastomer - Viton, EPDM, Nitrile

Our organization is engaged in manufacturing, supplying and exporting high quality array of Printed Aluminum Foil Lid.These aluminium foils are highly efficient for packaging products such as cosmetics, chemical products and mostly food items. Our aluminium foils are very pliable and can be easily formed and shaped into various objects. These aluminium foils can also be used with other materials such as papers or plastic to create stronger and better characteristics. Avail from us our aluminium foils in various thicknesses at economical prices. Features:- Die cut pieces Various size PPPSPETPVC cup seals Good sealing strength with tight & flat performance. 2-bright & vivid color printing The raw material is pure aluminum foil which can be recycled to conserve the environment Customized orders are available

• Brand Name: Ultra-Shine

Ultra-shine™ brings you injection waxes for the jewellery manufacturing industry. After extensive research and development, this acclaimed product line has been founded by srs jewelkon india pvt. Ltd., making us the chief in jewellery waxes. we had developed the specialized formulas using our cutting edge technology to give you the finest performance. Ultra-shine™ waxes gives you excellent shine and surface finish on the casted pieces and are easy to remove from the moulds. key features: * good shine * smooth surface * good workability * super fast drainout due to excellent fluidity characteristics rose pink injection wax: * rose pink is a general purpose wax with very good fluidity * rose pink fills intricate moulds easily * rose pink is a fast setting for easy removal from moulds * rose pink can be used for wax setting or "stone-in-place" waxing * injection temperature - 72oc - 74oc technical data: colour : pink drop melting point : 70oc - 78oc congealing point : 64oc - 68oc penetration at 25oc : 5 - 10 ±0.1mm viscosity at 100oc : 80 - 110 mpa.s density : 1.05gcm3.

Tamper evident seal evident security tape provides a security seal for shipping cartons, pallets, wooden crates, envelopes, bags,or other containers.

Agitator seal, agitators and vessels vary according to their position on the vessel, that is, whether the rotating shaft is top, side or bottom entry. Also, the material of the vessel, whether it is steel or glass lined, has a significant influence on the seal design. Seals for top entry vessels are expected to retain the gas or vapour above the fluid in the vessel. To do this, double seals are normally recommended, although for very light duties a single seal can be used. Unlubricated or dry running seals are being increasingly applied because they avoid the need for a seal lubricating system.

At Ali>Sizes are from 1/8” to 2” in inches and 6mm to 50 mm in millimeter All inch size bonded seals are ex stock with us.

We offer a wide range of hydraulic rod seals that provide the ultimate in protection from ingress of media.  

Sealed containers, bags, duty-free trolleys, tote boxes, roll cages, fire extinguishers, exit doors, gas meters, water meters and electricity meters are protected from manipulation. Creativity and innovation constantly result in new security seal solutions, applying appropriate materials and procedures for market leaders in the Airline, Catering, Post and Courier Services, BanksCash in Transit, Chemical, Utilities, Transport and Retail industries.

• dimensions: 280mm x 280 mm x 180 mm

This seal is one of the strongest seals in the product portfolio and is a two component seal. A plastic coated high security steel bolt. ABS Plastic coated locking chamber, this chamber and its peculiar shape gives it the name Bottle Seal. One of the most widely used seals in heavy duty applications the Secure bottle Seals is the preferred seal in the Logistics segment. It requires no tools to apply and needs a bolt cutters to remove.

Balanced dry wet application : chemical, pharmaceuticals plants and solvents these seals are offered in dry as well as wet construction. Due to its unique design this seal can withstand full vacuum to high pressure. These seals offer ease of installation, and can also accommodate high eccentricity and out of concentricity (upto 3 mm). Steam - sterilizable varient is offered for sterilizers.

Mechanical Seals are Engineered for Most Pumps, Mixer and Agitator Applications in Maintenance. in Many Cases the Designs have Been Proven to Be Workhorses Over Years of Use. in Others Seals Must Be Designed for Evolving Industrial Demands. mechanical Seals Deliver a Full Range or Rotary Configurations and Component Materials - to Handle Virtually and Fluid Moved By Any Equipment. When You Specify Engineered Mechanical Seals You have the Advantage of the Most Advanced Mechanical Seal Technology, the Latest in Field Proven Design and When Working with An Outside Sales Force There is Hands On Technical Support. rotating Face Units are the Dependable Mechanical Seal Answer for Worn Equipment When Your Shaft Seals Must Be Replaced. They are Ideal for New Equipment Designs or to Improve the Usefulness of Existing Equipment By Converting from Pump Packing to Mechanical Seals. we Offer Mechanical Seals Equivalent to John Crane , Burgmann and Others I.e Type Mg1, Mg12, Mg13, Metal Bellows , Water Pump Seals , Jc502, Jc2100, Type 43 Etc in Various Face Combination and Material

• Material: ss, silicon carbide and rubber
• Color: multiple colours
• Country of Origin: Made in India
• Size: 16 mm and above
• Brand: maxcare
• Model Name/Number: Multi Spring Mechanical seal
• Face: silicon carbide
• Hardware: ss-316
• O Ring: viton

The Rubber Oil Seals, we deal in, are distinguished for their precise construction, exceptional tolerance and never-failing function. Owing to our strong vendor base, we can furnish these Oil Seals & Washers in standard as well as customized specifications.

Oil seals for the shafts are of dynamic type in as much as sealing has to be provided between a rotating shaft and a stationery member. Int he vast majority of cases the internal pressure against which the seal has to work is very low and thus whist a simple lip seal may be adequate its performance depends to a large extent on a suitable unit load being maintained at the seal-shaft interface. The conventional form of Oil seal which is suitable for the majority of applications where the pressure involved is not more than about 5 PSI and the oil (or fluid) to be sealed is clean comprises a moulded elastomeric ring. For the majority of applications where a conventional single lip seal will be suitable, seal selection is based on seven basic points: namely shaft diameter, housing bore diameter and width, shaft speed, working temperature, fluid, pressure differential and service conditions.

• Size: 25 mm to 75 mm

» Multi spring» Non-clog design »Balanced   Applications: Muddy water, paper pulp, slurries and sugar syrup. By virtue of its spring protected design, these seals are ideal for high viscous and sedimentation media. Besides being compact, its unique design allows shaft mounted installation without fear of fretting

TRETIGHT™ 800 is an inflatable dock seal, designed for maximum tightness and long life time. The system consists of 4 main parts: Top cushion, side cushions (right and left) and fitting set. Enables optimal energy conservation Improves work environment Through its unique design, TRETIGHT™ provides great sealing abilities Manufactured from a unique fabric with outstanding durability and long life time The system is easy to handle and quick to inflate Low operational cost.

• Material: Bronze Filled PTFE
• Packaging Type: Box
• Surface Finish: Coated

• Alloy: AA 8011 / AA 1200
• Application: Food
• Type: Die Cut Piece
• Model Number: NA
• Packaging Details: Export Worthy Packaging
• Temper: Soft
• Supply Ability: 7500000 Piece/Pieces per Month
• Place of Origin: Maharashtra, India

• Temperature: 325° , 350°

Though continuous research and experience of more than 40 years with most modern technique and materials, we are able to master all the fields of application while giving highest functional reliability.

Benefits TPU coated polyester fabric Negligible permeability to fuel vapor Prevents vaporization of volatile oil from petrochemical tanks     Application Used in petrochemical industries owing to its excellent Fuel and Oil resistance property     Options Can be welded by High Frequency / Radio Frequency, Hot air welding or adhesive bonding techniques