Industrial Switches Dealers in Mumbai

Get in touch with us for acquiring top of the line quality Side Mounted Magnetic Level Switch! The Level Switch that we deal in is designed with full perfection and is in accordance with the laid quality norms. Our Switches come in high and low level alarms, pump control having point level detection for wide range of liquids. They are robust in construction and are suitable for marine and industrial applications.

• Material: Plastic
• Shape: Round
• Design: Standard
• Application: General
• Current: 0-50W

• Type: Ultrasonic
• Minimum Order Quantity: 1 Unit
• Model: DT WLS 2
• Portable: Yes

The DT WLS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold OFF photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching. PIR & 40 kHz ultrasonic wall switch occupancy sensor Trigger mode settings enable what sensing technolgies are used to initially turn the load ON and what technologies are used to keep the load ON Adjustable ultrasonic reach setting from 25% to 100% Bi-level load switching (2 relays) Line voltage lighting control (120/230/277 VAC, 50/60 Hz) 180° coverage pattern Manual ON or Automatic ON option Light level feature keeps lights OFF when sufficient daylight is present Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others “Switch Link” communication allows for up to 4 sensors to be grouped together IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds Audible alert feature provides an audible warning that the load will shut-OFF in 10 seconds unless additional motion is detected Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button Additional Information: Pay Mode Terms: L/C (Letter of Credit),Other Port of Dispatch: Mumbai Packaging Details: one pack per box

• Operating Temperature: -14 Degree F To 140 DegreeF (-10 DegreeC To 60 DegreeC)
• Flow Rate: 0.5 LPM To 41 LPM
• Model Number: FS-600
• Operating Pressure (Max.): 363 PSIG (25 bar)
• Port Size: 1/2
• Body Material: Stainless Steel

• Media Type: Gas
• Contact System Type: SPDT
• Electrical Connection: Screw Terminals
• Contact Material: Silver
• Color: white
• Country of Origin: Made in India

• Switching Element: Micro switch
• Cable Insulation: Pvc Material
• Life of Switch: 1 Lac Operations
• Rated voltage: 250 VAC
• Pressure Rating: 2 Bar
• Float Material: Polypropylene

Teknic/BCH/Omron limit switch plunger, rollertype, snaptype available

• Type: Air Compressor Pressure Switch
• Brand Name: Danfoss
• Application: Switching USe, Laboratory, Compressors, Compatible Gases
• Packaging Type: Box

• Certification: CE Certified, ISO 9001:2008 Certified
• Application: Magnetic Use
• Type: Reed Switches
• Voltage: 200VDC, 230VAC
• Frequency: 50HZ, 60Hz
• Power: 0-5Amp, 10-15Amp, 5-10Amp
• Temperature: 0Dig C To + 60Dig C
• Hole Diameter: 0-20mm, 20-40mm

We are the main supplier of this product.

• Others: They are used for controlling machinery as part of a control system, as a safety.

In electrical engineering a limit switch is a switch operated by the motion of a machine part or presence of an object. ... A limit switch is an electro-mechanical device that consists of an actuator mechanically linked to a set of contacts.

• Country of Origin: Made in India
• Brand: Atlas Copco
• Size: Small
• Operating Temperature: -40 to 105 Deg C
• IP Protection Class: IP67
• Packaging Type: Box
• Torque: 40 Nm

• Packaging Type: Plastic Packet
• Specialities: High Tensile, High Quality
• Color: Blue
• Max. Voltage: 500V
• Country of Origin: India

Suni Brand Grab differential Limit Switch is driven by holding and closing winches is used in auxiliary circuits for single lever grab control.   It is used for stopping the closing motor after closing or opening, regardless of the height of the grab and starting the holding motor after closing, for transition to the hoisting action as well as for stopping the holding & closing motors at the hoisting & lowest grab position.   Construction : The switch contains six cam operated switch elements which are used as auxiliary circuit limit switches (See switching sequence diagram). The dimension drawing shows that the switch has two shafts which must be driven by the holding and closing winches. The contracts of limit switches are 40 Amps rated at 500 V. A. C.   Mode of operation : The switches N5, N6 are limit switches for the highest and lowest grab positions. The 'Grab closed' and 'Grab open' limit positions are monitored by the switches N1 & N4, whereas N2 & N3 initiate the switching operations for single lever grab control.   Installation : The switch is best arranged to one side of the winch space between the drums where it should be easily accessible. It can be mounted either in a horizontal or a vertical position. However, the former is preferred since the switching equipment and gearing can be reached more easily when the cover has been removed. Auxiliary shafts connected to the winch of the grab hoisting gear are best used for driving the switch. The closing winch is connected to shaft 1 at the differential gear end and the holding which is joined to shaft 2 at the same or opposite end of the switch.   Accessories : A special wrench is needed to release the locking nut when adjusting the cam discs. This wrench is included with the switch.

• Switch Type: Rotary Limit Switch
• Usage: Eot Crane
• Operating Frequency: 415 volt
• Minimum Order Quantity: 1 Piece

  We have established ourselves as leading name in the field of Liquid Magnetic Float Level Switch in the market . Switching is achieved with the unique magnet system, giving snap-action latch-on switching. A switch mechanism is mounted inside the enclosure adjacent to the pressure tube. Vertical movement of the float magnet in the pressure tube simultaneously actuates the secondary and tertiary magnets in the switch mechanism to operate the contacts. Features: Snap-action Accurate mechanism Easy to maintain Other Details: Single, Bilevel and multilevel sensing with potential free contacts Float : SS-316/PU Foam/Poly propylene/BUNA-N Mounting : Flange, Threaded in MS / SS or TC joint Terminations: cable / DIN connectors / RTD head / weather proof or flame proof junction box Suitable upto 90 degree Applications: Scientific laboratory Research centres Chemical industries Technical Specifications: Float : S.S.316 or Teflon Coated or PP / PVDF/Monel Flange : Mini 1” NB to Any Size in C.S. or S.S.304 or S.S.316 or S.S. Lined C.S. Etc Reed Switch with Rhodium Contact SPST / SPDT . Rating : 0.5 Amp @ 240 VAC Switch Housing : Die Cast Aluminium, Weather Proof IP 65( Enclosure ) ( IS – 2147 )  Flame Proof to II A, II B ( IS – 2148 CMRSDhanbad Approved ) Operating Pressure : 10 Kg / Cm2Operating Temp : Maxi. 1000 C. Cable Entry : ½” NPT ( F ) OR ¾” ET ( F ) No of Switches : As Per Customer Requirement Stem Length : Up to 5 Meters

• Country of Origin: India
• Media Type: Gas
• Contact System Type: SPDT
• Electrical Connection: DIN Plugs
• Contact Material: Silver
• Packaging Type: Box
• Material: Stainless Steel
• Usage/application: Gas
• Surface Finish: Polished