Industrial Valve Dealers in Andheri East, Mumbai

  Our range of industrial valves can be easily handled & fitted. These quality industrial valves cater to the need of various industries such as process and chemical, refineries & petrochemicals, fertilizers, thermal power stations and others.

3-WAY/3-POSITION (CLOSED CENTER) NON-INTERFLOW MANUAL VALVE WITH POSI-CHECK® Application – Single-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed from pump to cylinder and “holds” with pump shut off; line to reservoir is blocked. Pos. 2 – All oil is open to reservoir through tank line. Center pos. – Cylinder pressure is held; pump should be shut off. Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. 10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired. NOTE: Also, valve may be remote mounted with a 9510 Subplates. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) orCounter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generated excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s). IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9502 and 9520, order four 12001 cap screws. For valve 9576, order four 17428 cap screws.

Our H series hand shut off valve is a kind of manual stop valve and is suitable for all kind of refrigerants. Special design on the valve cap prevents moisture penetrating into the valve. These valves can be installed in horizontal or vertical pipelines. Shut-off valves are thus an integral part of a refrigeration system. It is important for those who select, install, service and use these types of valves to be familiar

• Media: Air
• Coil Voltage (volt): 12V
• Body Material: Aluminium and Brass
• Internals Material: Aluminium
• Seals Material: Standard Nitrile and Viton
• Voltage Tolerance: AC +/-10%

• Packaging Type: Carton
• Voltage: 24 V AC, 24V DC, 110 V AC, 230 V AC
• Brand Name: CompAir Systems
• Material: Brass
• Warranty: 1 Year
• Country of Origin: India
• Media: Air
• Power: Solenoid, Hydraulic, Pneumatic
• Condition: New

We are offering Solenoid Valves.

We are a well-known manufacturers and suppliers of a vast array of Valves and we are offering of Safety Valves.

We make available the products using the exceptional quality raw material that is experts certified. This makes our product range completely reliable and genuine. We have developed several offline as well as online options for the convenience of clients to ensure faster trade.

• Material: Brass
• Usage/Application: Water
• Country of Origin: Made in India
• Pressure: High Pressure
• Color: Golden
• Brand: Finish Fire

Gate Valves are provided with properly machined and lapped backseat to ensure re-packing under pressure while fully open. Availability of Solid Wedge, Flexible Wedge, Split Wedge and Parallel Wedge designs offer maximum option to clients for suitable selection.Gaskets and Gland packing material are selected to suit service conditions like temperature, corrosion, erosion, pressure, vacuum and other applications.

• Weight: 0-500 g
• Material: Mild Iron, Fibre, Plastic, Stainless Steel
• Usage: Water, Air
• Colour: Black, White, Silver, Blue
• Size: 0-1000 MM, 1000-2000 MM
• Size: 0-10 Inch, 10-20 Inch

Our company offers an entire gamut of Industrial Check Valves in various sizes and patterns. The entire range of industrial valves includes Lug, Jacketed, Butterfly, Gate, Radiator, Gas, Safety, Magazine, Ball, Non-Return, V-Port ball, Sprinkling, Reducing Safety, Dual Plate check, Automatic, Manual, Globe, Knife gate Duo-Check, Pinch, Swing Check, NRS Gate & Angle, Pressure Seal Type Gate, & Pressure Seal Type Globe, & Pressure Seal Type Swing Check, Pressure Seal Bonnet, Parrel Seal Gate, Y-Strainer, Cryogenic, Angle, etc. We source these Korean make Industrial Control Valves from trusted manufacturers, who make them from superior quality metals like Cast Carbon, Cast Stainless Steel, Alloy Steel, etc. These Industrial Safety Valves are widely used in industries for specific purposes and are highly demanded. ACE VALVES is a South Korean Company and we are in the business of Manufacturing & Supplying high quality valves conforming to most demanding international standards of various industries, since 1998. Due to exceptional quality and competitive price ACE Valves is exporting to over 27 countries and some of the well known multi-national companies such as Siemens from Germany, Saudi Aramco, SWCC from Saudi Arabia, LURGI from Germany, ABB from Germany, BASF�s China office and other well known and extremely reputed companies are our regular buyers. The list below will give you the glimpse of our product range : Gate, Globe, Swing Check Valves (150#~2500#, WCB, WC6, WC9, LCB, CF8, CF8M etc)Plug Valves (Lubricated, Non-lubricated type, Teflon lined)Butterfly Valves (High Performance, Triple offset type etc, Rubber lined, Teflon lined)Forged Steel Valves (Gate, Globe, Swing Check, Lift check etc)Strainer (Y-type, Bucket type etc)Teflon Lined Ball valves.Jacked type of Gate valves & Plug valves and Ball valves. The various sophisticated and complex valves supplied by us are based on the requirements projected by our buyer and they are made from Cast stainless steel, Cast carbon steel, Cast alloy steel etc conforming to rigorous international standards (API & ANSI) with adequate capability to withstand high pressure applications as demanded by our esteemed buyers across the world.   ACE Valve is fully capable of integrating the complete valves requirements of our clients and offer to them as a comprehensive package immensely benefiting the existing buyers / clients.   This matchless achievement was possible because ACE Valves always employs advanced manufacturing processes that include casting, machining, assembling and testing facilities to meet high quality standards of the demanding modern industries.

VIKING™ offers a range of valves from both Si-Tech and Apeks according to your preference. Non magnetic versions availlable for military use.

• Size: 2” to 6”

Din Standard Globe Valve Design as per DIN 3356 & Din 3230,Size from 2” to 6”, Class PN 40 & PN 64.Din globe valve

Pneumatic Actuators Electric Actuators Hydraulic Actuators Control Valves

An electronically controlled, proportional flow-control valve modulates fluid flow in proportion to the input current it receives. The valves can easily control cylinders or smaller hydraulic motors in applications that require precise speed control or controlled acceleration or deceleration.

Flush Bottom Valves are used for process materials discharging applications. These angle-type flush bottom valves are designated for two values and two types of construction.The first value is the inlet flange connection size which is fixed to the tank or vessel’s bottom pad, and the second value is the size of the port and the outlet flange which is connected to the pipe. Better flow capacity for line size, Tight closing for reliable shut-off even if change in pressure and temperature are sudden and extreme, Unique packing designs to suit various temperature and fluid needs.

• Material: Cast Iron
• Country of Origin: Made in India
• Valve Type: Control Valve
• Body Style: Globe Type
• Pressure: 20psi
• Temperature: 140Degree Celsius
• Fluid Media: Air
• Features: Proper Lubrication And Use For Durability Of This Cylinders