Industrial Valve Dealers in Goregaon East, Mumbai

• Color: Black,Blue
• Number Of Way: 2way
• Automatic Grade: Manual
• Size: Available In Different Sizes
• Pattern: Plain
• Pressure: Medium Pressure
• Feature: Durable
• Finish: Coated

Fcv

• Brand Name: Danfoss
• Certification: ISO 9001:2008 Certified
• Packaging Type: Box
• Type: Differential Pressure Switch
• Corrosion Resistance: Yes
• Ce Conformity: Yes
• Media Type: Gas
• Rust Proof: Yes

  DANFOSS INDUSTRIAL REFRIGERATION SHUTOFF REGULTATING VALVES SVA, STC, REG, SNV-ST, QDV CHECK VALVE SCA/SCA-X, CHV/CHV-X, NRVA SAFETY VALVE SFA, SFV, POV, DSV LIQUID LEVEL REGULATING VALVES HF1, SSV1/3, SV4/5/6, PMFL, PMFH SOLENOID VALVES EVRA/EVRAT, EVRS/EVRST, ICLX, ICSH, BV1/2, GPLX, GPS, PML, PMLX PRESSURE & TEMPERATURE REGULATOR ICS, ICM/ICAD, CVP, CVC, CVT, EVM, PM, ICV, MEV, MRV, PMC, ORV, OFV, CVMD VALVE STATION ICF SERIES STRAINERS FIA, FA, FIL, DCR SWITCHES & THERMOSTAT RT, KP, MP SERIES, AKS SIGHT GLASSES LLG SERIES SENSOR AKS4100/U, GDA, GDC, GDHC, GDHF, GDH EXPANSION VALVE TEA, TEAT, TEVA, TEAQ, AKVA

• Material of Construction: SS 304 / 316 , PTFE
• Size range: ½” to 4”
• End Connections: TC

Ambika has designed spring-assisted check valve (Sanitary NRV) for horizontal mounting to prevent flow reversal in industries. In horizontal NRV the line of flow is eccentric for the flow output and because of this the fluid flowing through the NRV does not stay at seat due to gravitation force. This help for better operation in horizontal mounting as well less effect of back pressure in valve. The conventional NRVs are in same line of flow which do not have this feature. The specially designed end connection is easy for mounting and dismounting and so it is comfortable for maintenance and less time consuming. Additionally body and seat, is fastened with a quick release clamp and elastomeric body seal to permit fast and easy access to the internals.   Principle of operation                   In line spring assisted NRV is designed to prevent reversal of flow with strict clean condition. The valve opens whenever the pressure below the plug exceeds the pressure above the plug due to spring and higher counter pressure will press the plunger valve against the seat to close the valve.   Features and Specialities • Fully drainable in vertical / horizontal installation.                   • TC end connection as per ASME BPE standard.                   • 3a standard                   • Material traceability certificate for components and elastomers ( FDA approved ) used in check valves. ( on request )                   • Capable to withstand CIP at 80deg0   SIP at 123deg0                      • Internal surface finish o.8ra.                   • Spring assisted silent closing.                   • Cracking pressure from 10 – 20 mbar ( on request )                   • Softseated sealing     • This NRVs are made completely from bar stock, Non-magnetic.

• Brand Name: Brijeshballs
• Material: Stainless Steel
• Color: White
• Type: Rotary Airlock Valve
• Country of Origin: India
• Power: Hydraulic
• Pressure: High
• Application: Industrial

We make internal steel parts for air valve in diff sizes

      We are reckoned as a prime Manufacturer of qualityOverflow Valves. These Overflow Valves offered by us, are made as per international standards thus finds application in various automotive industries.   Features : Durable Superior quality Corrosion resistant High performance Application : Automotive industry

• Structure: Needle
• Temperature: High Temperature
• Body material: Stainless Steel

• Country of Origin: Made in India
• Pressure: Low Pressure
• Material: WCB CF8 CF8M
• Size: 15 mm to 100 mm
• Brand: SAI
• Temperature: -50 C to 500 C

• Brand Name: Sanipure Water Systems
• Pressure: High pressure
• Category: Valves
• Product name: Stainless Steel Diaphragm Valves
• Material type: Stainless steel
• Min order Qty: 1pc
• Packaging Type: Wooden, Carton, Corrugated Box, Plastic Wrap
• Size in inch: customized
• Surface treatment: polished
• Installation type: Threaded
• Features: Aesthetic look  Corrosion-free Precision made Smooth surface finishing Highly durable Easily washable Cost-effective

Body Materials: SS 316, SS 316L, SS 321, Duplex 2205, Titanium, Alloy 400, Alloy 625, Alloy C-276. Maximum Pressure Rating: 6000psig (414 bar). Temperature Rating: -54°C (-65°F) to 482°C (900°F). End Connection: 1/8″ to 1″ and M14 to M27 thread, 1/8″ to 1″ and 3mm to 25mm tube fitting.

We manufacture Screwed End Ball Valve in the size of 1/2" to 2" in full port & reduce-port. It is made from solid S.S. / M.S. material, investment casting from S.S. & M.S. and end connection from B.S.P. / N.P.T. The Screwed End Metal Ball Valve, we produce is cost effective. Our One Piece Screwed End Ball Valve is easy to install, durable and corrosion resistant that make it perfect for industries of textiles, paper mills, fertilizers, steel and power plants, chemicals, refineries, oil fields water treatment, etc. We are one of the leading One Piece Screwed End Ball Valve Manufacturers & Suppliers. Details Size : 1/2" To 2" in One Piece SCREWED.Type : Full port & Reduce port.Seat : P.T.F.E.Material : Solid S. S. / M. S.Investment : Casting in S. S. & M. S.End Connection : B. S. P./ N. P.T. in Screwed.

• Feature: High tensile strength,Dimensional accuracy,Flawless finish

• Pressure: 1.6MPa
• Material: Stainless steel
• Model: ZCRB
• Caliber: DN25-DN600

• Material: Rubber
• Color: Red
• Shape: Round
• Diameter: Upto 4 inch

• Material: stainless steel
• usage: pipe

• Feature: Easy to fit, Durable, Corrosion resistant

Applications   Needle Valves are used for flow control, isolation purpose, on /off applications. Suitable for pressure upto 400 kg/cm2 and higher.   Features   4 Material SS316 or SS304 4 1/4", 3/8”, ½” bsp or npt connection 4 Pressure Rated upto 400 kg/cm2 and higher

We are offering stopping plug.

• Material: Stainless Steel
• Pressure: Up To 50 Bar Pressure
• Type: end pressure relief valve
• Media: Water
• End Connection: TC

We are considered a trusted Manufacturer, Supplier and Exporter of Industrial Valves from Mumbai, Maharashtra. We assure of the quality of our valves which are fabricated using high grade components and latest techniques. Owing to our efficient logistic structure, we are capable of delivering small or bulk orders of Industrial Valves all over the world.

• Material: Casting
• Brand Name: SPIRAX
• Port Size: 1/2" - 2
• Port: JNPT
• Place of Origin: Maharashtra, India
• Structure: Steam Trap
• Temperature of Media: Medium Temperature
• Model Number: HM-34

With the increase in demand for analytica product and instrumentation, AKI has developed fine control valve with great precision and accuracy. Fine control valve has great capabilty to deliver the flow at pressure upto 10 kg/cm2. It alows to deliver and control the finnest flow. It has alluminum knob handel which provides smooth control and operating. SIZES   1/4" (SUITABLE FOR 1/4 TUBING/ 1/4 MALE AND 1/4 FEMALE CONNECTIONS) 1/8” (SUITABLE FOR 1/8 TUBING/ 1/8 MALE AND 1/8 FEMALE CONNECTIONS)     FEATURES   PRESSURE – 0 TO 10KG /CM2 PANEL MOUNTABLE     DESIGN     ANGLE TYPE – AS SHOW IN ABOVE IMAGE , FLOW CONTROL VALVE CAN BE MADE IN ANGLE TYPE STRAIGT TYPE – FLOW CONTROL VALVE CAN BE MADE IN STRAIGHT DESIGN AT 180 DEGREE.

• Maximum Working Pressure: 400 bar/ 6000PSI
• Maximum Temperature: 240 Degree Cel
• Material: Stainless Steel / Carbon Steel
• Gland Packing: PTFE
• Standard Process Connection: 1/2
• Standard Instrument Connection: Flanged
• Drain: 1/4

We are offering 2 valve manifold - direct mounting. these manifolds provide a direct mounting feature with the isolating valve & vent calibration value in a single unit. this can be directly mounted on the static pressure transmitter to eliminate several parts and joints. Standard process connection is 12" nptf provided with vent plug.

Needle valves are small valves used for flow control in liquid or gas services. The fine threading of the stem and the large seat area allow for precise resistance to flow.

• Size: 1/2 To 36 Inch
• Type: Ball Valve
• Lever Type: Yes
• Warranty: 16 months
• Threaded: Yes
• Colour: White

Owing to our rich industry experience, we are reckoned among the distinguished Manufacturers, Suppliers and Exporters of Polypropylene Union Type Ball Valve (Flanged End). We offer the Valves in sizes ranging from ½” to 2”. We hold the expertise to deliver bulk orders of these within the stipulated time.   Specifications : Construction – Union Type Design. End Connections – Flanged End as per DIN Std. BS 10 (Table D/E/F) ANSI B 16.5 (ASA 150 #) Manufacturing Standards – As per Manufacturer’s Standards. Available M.O.C – PP ( Polypropylene). Available Size – ½” to 2”. Maximum Working Pressure 10 Kg/cm2. Hydraulic Test Pressure : Body - 150 PSI. Seat - 100 PSI. Working Temp Up To 80o C Note : All Dimension are in ± 2 mm Maximum Working Pressure 10kg/cm Hydraulic Test Pressure Table D/E/F/ASA 150 # DIN etc.