Industrial Valve Dealers in Kurla, Mumbai

• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Cast Iron
• Feature: Blow-Out-Proof, Casting Approved, Durable
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Temperature Of Media: 0 Degree Celsius To +70 Degree Celsius

• Type: Audco Valves
• Material: Cast Steel, Stainless Steel
• Application: Industrial
• Condition: Good
• Pressure: High Pressure, Low Pressure, Medium Pressure

we are offering audco cast steel gate globe check valves. gate valves are of flexible wedge, outside screw-and-yoke and bolted-bonnet construction. The valves conform to api 600iso 10434.globe valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnet construction. They conform to bs 1873 and also meet the general requirements of api 600, including shell wall thickness and stuffing box dimensions.check valves are of swing-type and bolted-cover construction. They conform to bs 1868 and also meet the general requirements of api 600, including shell wall thickness.

Our assortment of Plug Valves manufactured by our company are from high quality cast iron and cast carbon steel.Plug Valves are 90 degree action from open to close, protected seats, positive shut off,, simple in line maintenance, minimum flow resistance, simple construction, and finally, rugged construction ensuring long life.Plug valves can be operated manually by wrench, Hand wheel through gear box, or quarter-turn actuator driven pneumatically or electrically. Our company is renowned as one amidst the reliable Plug Valves Manufacturers and Suppliers.

Offered range is specially designed at our well-equipped infrastructure to meet the industry requirement of a safe, durable and reliable shut off valves. Our range of valves is available in different specifications to suit the versatile requirements of the clients.

Model : DV series     Flow control valves are widely used range in industries and as named they are applied in controlling of flow. This range is available in high pressure rating and through knob rotation we can control the flow of media as per required. On knob, we have label to indicate the flow and hence accuracy of flow can be achieved. Locking system is arranged to lock the valve so no auto tuning is occurred. As named this valves are manufactured without facility of inbuilt check valve. This causes free reverse pressure possibilities.     Features   700bar operating pressure Temp. rating 20°C to 250°C 1/8" - 1 1/2" BSP and NPT End Connections Flows to 80 gpm Carbon steel housing FPM (Viton®) O-rings (standard) Graduated knob and color spindle for accurate flow control Provision for panel mounting

• Material: Mild Steel
• Size: 2-inch upto 10-inch
• Model Name/Number: 50 NB upto 250 NB

AD13 - ‘T’ Port Diverter Valve AD14 - ‘L’ Port Diverter Valve AT13 - ‘T’ Port Three-way Valve AT14 - ‘L’ Port Three-way Valve The Diverter Valve is designed to divert media from the bottom inlet port to either of the two outlet ports. The Three-way Valve, also known as a Mixer Valve, permits use of any port as inlet. NOTE Available in screwed and socket-weld designs. For material specifications and general dimensions, refer to table on A44 series.

• Features: Brilliant performance, Sturdy construction, Minimal maintenance, Easy operations

Wesman manufactures its own range of Butterfly valves that are used for manual motorized input control and for balancing of burner firing rates. Butterfly valves are used to control air required in the burner inlet for complete combustion. Butterfly valves should be the same pipe size as the equipment in the line they are serving in order to give a negligible pressure drop when the butterfly valve is fully open.

Trader and manufacturer of gas-liquid mixing pump, daf pump,ozone pump, micro bubles, vortex pump, ozone mixing pumps, electric diaphragm pump, diaphragm pump, gate forged steel gate, forging steel valves, butt

Available in various dimensions and specifications, our wide range of Butterfly Valves is fabricated from the finest quality mild steel and stainless steel. The Butterfly Valves are primarily employed with lap joint stubs and highly appreciated by clients across the country. Moreover, Butterfly Valves are offered keeping in view the existing market standards and requirements.Specifications Pressureclass : PN-10 Manufacturing STD. : BS 5155/AP1609 Body Material : WCB/IS 210 GR.20-25/CF8/CF8m Disc Material : WCB/IS 210 GR.20-25/CF8/CF8m Spindle Material : AISI 410/304/316 Lining Material : NITRIL/EPDM/HYPALON/ VITON/ BUTYLE/ NEOPENE 'O' RING Material : NITRIL Pin Material : AISI304 Lever Material : IS 210 FG200 Salient Features Corrosion resistant Highly robust Abrasion resistant Superior quality Cost-effective

• Media: Water
• Material: CI also Available in Cast Steel and Mild Steel
• Packaging Type: Carton Box
• Pressure: Medium Pressure, High Pressure
• Corrosion Resistance: Yes

Design Standard :   API 600/BS-1414 Face To Face Dimensions :   ANSI B 16.10/BS-2080Size Range :   15mm to 600 mm.Pressure Rating :   150/300/600/900/1500/2500 class. Material Of Construction : From bar stock in carbon steel or stainless steel (304, 316,304L. 316L. 321) Hastalloy B & C & Alloy 20. Castings in carbon steel to ASTM A216Gr. WCB, WCC, LCB, LCC. Casting in stainless steel to ASTM A 351 Gr. CF8/CF 8M/CF 8C/CF3/CF 3M Alloy 20,Hastalloy B & C. Castings in C.I. to I.S. 210 G.R.20 ,Castings in Alloy Steel to ASTM A 217 C5, WC6, WC9, WC12. Ends : Screwed to BSP/BSPT/NPT for sizes 15 mm to 50 mm. Flanged to ANSI, DIN or BS, API-6D standard. Socket weld to ANSI B16.11. for sizes 15 mm to 50 mm. Butt weld to ANSI B 16.25 for sizes 15 mm to 600 mm.

• Temperature Of Media: Low Temperature
• Automatic Grade: Semi-Automatic
• Coil Voltage (volt): 24V
• Control: Pilot Operated
•  :  

Check Valves or non-return valve, allows the fluid to pass in one direction only. A ball check valve is a check valve in which the closing member, the movable part to block the flow, is a spherical ball. In some ball check valves, the ball is spring-loaded to help keep it shut. A diaphragm check valve uses a flexing rubber diaphragm positioned to create a normally-closed valve. Pressure on the upstream side must be greater than the pressure on the downstream side by a certain amount, known as the pressure differential, for the check valve to open allowing flow. Once positive pressure stops, the diaphragm automatically flexes back to its original closed position. A swing check valve or tilting disc check valve is check valve in which the disc, the movable part to block the flow, swings on a hinge or trunnion, either onto the seat to block reverse flow or off the seat to allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although swing check valves can come in various sizes, large check valves are often swing check valves. A stop-check valve is a check valve with override control to stop flow regardless of flow direction or pressure. In addition to closing in response to backflow or insufficient forward pressure (normal check-valve behavior), it can also be deliberately shut by an external mechanism, thereby preventing any flow regardless of forward pressure. A lift-check valve is a check valve in which the disc, sometimes called a lift, can be lifted up off its seat by higher pressure of inlet or upstream fluid to allow flow to the outlet or downstream side. A guide keeps motion of the disc on a vertical line, so the valve can later reseat properly. When the pressure is no longer higher, gravity or higher downstream pressure will cause the disc to lower onto its seat, shutting the valve to stop reverse flow.

• Specialities: Pilot operated valve for limiting a system pressure, Operation by proportional solenoid, Valve and control electronics from a single source, External control electronics for types DBE and DBEM
• Item Code: BoschRexrothDBDS6

• Type: Swagelok type
• Brand Name: Trimurti Engineers
• Material: SS as per client
• Pressure: 1000 to 10000

Hi-Pressure Instrumentation Valves Fittings & Hydro pneumatic accessories.

• Valve Size: 150-1200
• Temperature Pressure: UPTO 1000 DEGREE
• MOQ: As Per Client Requirement

We have a well-developed all the in-house storage facility, laced with all the modern facilities. Also, we have hired a team of professionals who efficiently manage and maintain it. By making use of quality packing material, we are able to ensure that the orders will remain free from damage during transit. Also, our expert packing personnel strictly check the entire lot before final dispatch.

Valve Guides are made from Grey Cast Iron and CuZnAl-alloy material GREY CAST IRON of perlitic structure with high phosphorous content. The perlitic structure and the reticular phosphide distribution along with the good graphite formation give high wear resistance / friction less operation to the valve and improved running properties in poor lubrication condition.The available ranges are suitable for light, medium and heavy duty applications. CuZnAl-alloy Guides are with excellent wear resistance and low coefficient of friction. Used for highest stressed guides.  The available ranges are suitable for light duty applications. 

Atmospheric Air mainly consists of Oxygen and Nitrogen gases along with small quantities of water vapour, Carbon Dioxide, Argon, Helium, etc,Oxygen and Nitrogen from the Air are separated due to difference in boiling points by distillation through a fractional column.

• EGR VALVE: ASHOK LEYLAND
• EXHAUST GAS RECIRCULATION: 24V H4AND H6

egr valve for ashok leyland bs4 vehical all model

  Nirmal has established itself as an expert in control valve solutions required for services such as manufacturing; in the field of self-actuated pressure control valves, low -pressure nitrogen blanketing systems, reduction in gas pressure with safety shut off & metering skids

METERING VALVE FOR MINERAL ABRASIVES FSVThe Contracor FSV flow control valve is designed for the precise metering of abrasive into the compressed air flow at the outlet of a blast machine.    Design featuresThe 45° inclined FSV valve design affords uniform mixture of air and abrasive.  The valve's durable control disks provide precise metering of an abrasive quantity.  The service port allows the valve to be cleared of clogging.  The Contractor FSV flow control valve is designed for working with mineral abrasives (slag).

• Material: Cast Iron,Stainless Steel
• Type: Butterfly
• Power: Hydraulic
• Port Size: 0.1mm - 5 Cm,6cm - 20 Cm,21cm - 50 Cm

We provide customized packaging solutions, as we understand each customer is unique. The packaging we provide is strong, non-toxic, and capable of braving shipping and handling. We have established a state-of-the-art warehouse facility and equipped it with the latest inventory control system. Thus, we can take care of seasonal supply, wholesale supply, and quick supply among others.   Features : Long service life Immaculate finish Simple design High efficiency Enhanced durability Crack resistance

• Media: Water, Gas, Air
• Material: Stainless Steel
• Pack Type: Box
• Finish: Polished

• Size: 1 1/2" (40 mm) to 12" (300 mm)
• Material: Stainless Steel
• Rating: PN-10/PN-16

1.1 GeneralModel ACDT-100- Condensate AIR Drain Trap/Valve is an automatic liquid drainer for compressed air system. 1.2 SpecificationAvailable size -15. 20. 25, 32 & 40 NB End Connection Screwed BSPT/NPTPMO - Max Operating pressure = 13.0 barTMO - Max Operating Temperature = 127°CCold hydraulic Test Pressure = 26.0 bar(g)Δ PMX Max Differential Pressure = 13 bar 1.3 Typical ApplicationsSeparator on Air Main, After cooler, Inter Cooler, Air Cooler, Air Receiver Dryers, Oil Coolers and many more. 1.4 Operating PrincipleCondensate causes the float to rise which opens the main valve. This will pass condensate continuously as it