Industrial Valve Dealers in Malad West, Mumbai

• Size: 1/2 To 36 Inch
• Type: Ball Valve
• Lever Type: Yes
• Warranty: 16 months
• Threaded: Yes
• Colour: White

Owing to our rich industry experience, we are reckoned among the distinguished Manufacturers, Suppliers and Exporters of Polypropylene Union Type Ball Valve (Flanged End). We offer the Valves in sizes ranging from ½” to 2”. We hold the expertise to deliver bulk orders of these within the stipulated time.   Specifications : Construction – Union Type Design. End Connections – Flanged End as per DIN Std. BS 10 (Table D/E/F) ANSI B 16.5 (ASA 150 #) Manufacturing Standards – As per Manufacturer’s Standards. Available M.O.C – PP ( Polypropylene). Available Size – ½” to 2”. Maximum Working Pressure 10 Kg/cm2. Hydraulic Test Pressure : Body - 150 PSI. Seat - 100 PSI. Working Temp Up To 80o C Note : All Dimension are in ± 2 mm Maximum Working Pressure 10kg/cm Hydraulic Test Pressure Table D/E/F/ASA 150 # DIN etc.

Needle valves are small valves used for flow control in liquid or gas services. The fine threading of the stem and the large seat area allow for precise resistance to flow.

• Feature: Durable
• Application: Water Fitting
• Pressure: High Pressure
• Material: Cast Iron
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 4/5inch, 5/6inch, 6/7inch

• Material: Stainless Steel
• Brand Name: Aqua Flow
• Application: Industrial
• Size: 50 to 600 mm
• Pressure Range: 125/150 psi
• Nominal Diameter: DN50 to 600 mm

• Brand Name: RYOBRAN

We are offering High and low pressure , needle, ball , gate and globe valves , all materials, with and with out actuators.

• Type: Flange End & Screwed End Type
• Material: PP
• Usage: Water Fitting
• Color: White
• Packaging Size: 5 Pieces
• Warranty: 1 Year

Construction - Ball type design, Soft seated.Design & Manufacturings - As per Manufacturer's Standard.End Connections - Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD.Available M.O.C.: PP (POLYPROPYLENE)   HDPE (HIGH DENSITY POLYETHYLENE)   ISOTACTIC PP   PVDF (POLYVINYLIDENE FLUORIDE)

• Brand Name: FM/PPW
• Usage: Water
• Size: 1/2 - 4 inch
• Material: Brass
• Country of Origin: Made in India
• Place Of Origin: Pan India
• Operating Temperature: -10 to 100 deg C
• Max Working Pressure: Upto 10 bar

Flow control valve with aerosol (716 x 28 unf) inlet and 0 to 1 lpm flow meter is used for calibration gases and industrial safety monitors.

• Power: 10 HP

A prominent manufacturer, supplier of huge range of Rotary Valve.

• Size: 1/2" (15 mm) to 4" (100 mm)
• Class: 150 #/300 #/ 600 #/900 #/1500#
• End: Wafer Type Suitable for 150 # / 300# Flanges
• Design: DIN EN 558 – 2
• Seat: Standard shall be metal to metal / rubber seat on request

We expertise in manufacturing high quality rubber parts which are used on a heavy scale in Pumps (Industrial Pumps, Hydraulic & Pneumatic Pumps, Chemical process & acid pumps, Submersible pumps, Waste water & Slurry pumps, etc) Valves (Solenoid valves, Pneumatic & Hydraulic valves, Pressure regulators valves, control valves, Saunders valves, valves for Actuators, Butterfly valves, Gate valve, Check valve etc.)

Modulating valve Commissioning no longer needed Operates independantly of pressure changes Flush mode through removable cartridge Accurate and easy setting of max. flow Full control authority and perfect flow control Can be installed with valve in any desired position Can be installed directly onto bends, reducers, and flexible hoses Inserts are color-coded and easily identifiable.

Fittings are used as intermediate connection between two parts in piping systems Fittings are available in various materials like Carbon steel, Stainless Steel , Brass.

• Material: Stainless Steel
• Brand Name: Torque
• Valve Size: 08/10/16 inch
• Specialities: Varied specifications, Excellent durability, Economic rates
• Usage/Application: Industrial
• Pressure: High Pressure
• Flow: upto 150lpm
• Max Flow: 250lpm
• Max Pressure: 210 bar

• Type: Flush Valve
• Brand Name: DPL
• Material for Construction: Stainless steel
• Flanged ends: "Y" type
• OEM: Available

• Size Range: 1, 1.1/2", 2", 2.1/2", 3" and 4".
• Test Pressure: 10 kg upto 4"

Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm, Manufactured from Poly Propylene, a Chemically inert thermoplastic, Can be used upto 90°C Temp, Hydraulically and Pneumatically tested for 10 Kg upto 4", Protective and Resistive from most of the corrosive Chemicals.

• Material: Borosilicate glass
• Model Number: Glass Flush Bottom
• Port: Mumbai, India
• Place of Origin: Maharashtra, India
• Lead Time: 1 week
• Supply Ability: 100 Piece/Pieces per Month