Industrial Valve Dealers in Vile Parle, Mumbai

• Material: Metal
• Feature: Blow-Out-Proof, Casting Approved
• Automatic Grade: Automatic
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Number Of Way: 2way, 3way, 4way
• Surface Finishing: Polished

Duflon lined hoses and hose connectors are manufacturered using a variety of melt processable fluoropolymers. The range not only includes flexible hoses, but also hose fitting and adaptors.

• Size: 1 Inch
• Material: PP and also available in HDPE
• Color: White
• Working Temp: 80 C
• Working Pressure: 100 PSI

• Material: Stainless Steel
• Media: Air
• Frequency: 50 Hz
• Voltage: 120 V
• Automation Grade: Automatic
• Ip Rating: IP 65

Application – Single or double-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed to “advance” side of cylinder, oil from “retract” side goes to reservoir; cylinder “holds” with pump shut off. Pos. 2 – Oil goes to “retract” side of cylinder; cylinder “holds” with pump shut off. When using as a 3-way valve for single-acting cylinders, port “A” or “B” is plugged. Used on these pumps – P460, PA6D, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. NOTE: 9504 can be remote mounted with a 9510 Subplates. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to this valve. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws. For valve 9582, order two 12001 and two 10856 cap screws. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generate excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s).

• Packaging Type: Carton
• Voltage: 24 V AC, 24V DC, 110 V AC, 230 V AC
• Brand Name: CompAir Systems
• Material: Brass
• Warranty: 1 Year
• Country of Origin: India
• Media: Air
• Power: Solenoid, Hydraulic, Pneumatic
• Condition: New

We are offering Solenoid Valves.

Industrial valves :ecotrol,combined pressure reducing and desuperheating,valve with ribeter pressure controller,desuperheaters,single / multi stage,safety relief,safety,h.p.heater bypass ( 2 way and three way ),high pressure stop and check,high pressure gate,swing check , ball v valves,high pressure vontrol, turbine bypass control,roboter,positioners.

We are the eminent Gate Valves Manufacturer and Exporter in India which is basically a motor valve. It is very useful and made with advanced technology. Features: Optimum quality Low maintenance required Economic prices

SIZE RANGE: 2” – 6” MATERIAL OF CONSTRUCTION: BODY: Ductile Iron A395 or SS A351 CF8, Lining PFA – D3307 Type II or FEP – D2116 Type IIIVALVE SEAT: PTFE / GFT D1457 SPINDLE: MS with Lining: PFA – D3307 Type II or FEP – D2116 Type IIIGLAND: Virgin PTFE – D1457BONNET: Cast Carbon SteelFASTENERS: SS304ADAPTOR: MS or SS304HANDLE UNIT: Cast Iron / Cast SteelWHEEL NUT: Gun MetalSURFACE: External surface are painted with Red oxide primer.   Dimensional details are as per below table

We are a well-known manufacturers and suppliers of a vast array of Valves and we are offering of Safety Valves.

• Material: Brass
• Usage/Application: Water
• Country of Origin: Made in India
• Pressure: High Pressure
• Color: Golden
• Brand: Finish Fire

• Material: PP-R and Copper
• Color: White, Grey, Green
• Series: SDR6/S2.5
• Pressure Grade: PN2.5

jacketed ball valves, hi-flow brand ball valve, Ball Valve, Piston Valve

• Features: For subplate mounting, Subplates to data sheet RE 45062 (separate order), For threaded connections, 4 opening pressures

Our company offers an entire gamut of Industrial Check Valves in various sizes and patterns. The entire range of industrial valves includes Lug, Jacketed, Butterfly, Gate, Radiator, Gas, Safety, Magazine, Ball, Non-Return, V-Port ball, Sprinkling, Reducing Safety, Dual Plate check, Automatic, Manual, Globe, Knife gate Duo-Check, Pinch, Swing Check, NRS Gate & Angle, Pressure Seal Type Gate, & Pressure Seal Type Globe, & Pressure Seal Type Swing Check, Pressure Seal Bonnet, Parrel Seal Gate, Y-Strainer, Cryogenic, Angle, etc. We source these Korean make Industrial Control Valves from trusted manufacturers, who make them from superior quality metals like Cast Carbon, Cast Stainless Steel, Alloy Steel, etc. These Industrial Safety Valves are widely used in industries for specific purposes and are highly demanded. ACE VALVES is a South Korean Company and we are in the business of Manufacturing & Supplying high quality valves conforming to most demanding international standards of various industries, since 1998. Due to exceptional quality and competitive price ACE Valves is exporting to over 27 countries and some of the well known multi-national companies such as Siemens from Germany, Saudi Aramco, SWCC from Saudi Arabia, LURGI from Germany, ABB from Germany, BASF�s China office and other well known and extremely reputed companies are our regular buyers. The list below will give you the glimpse of our product range : Gate, Globe, Swing Check Valves (150#~2500#, WCB, WC6, WC9, LCB, CF8, CF8M etc)Plug Valves (Lubricated, Non-lubricated type, Teflon lined)Butterfly Valves (High Performance, Triple offset type etc, Rubber lined, Teflon lined)Forged Steel Valves (Gate, Globe, Swing Check, Lift check etc)Strainer (Y-type, Bucket type etc)Teflon Lined Ball valves.Jacked type of Gate valves & Plug valves and Ball valves. The various sophisticated and complex valves supplied by us are based on the requirements projected by our buyer and they are made from Cast stainless steel, Cast carbon steel, Cast alloy steel etc conforming to rigorous international standards (API & ANSI) with adequate capability to withstand high pressure applications as demanded by our esteemed buyers across the world.   ACE Valve is fully capable of integrating the complete valves requirements of our clients and offer to them as a comprehensive package immensely benefiting the existing buyers / clients.   This matchless achievement was possible because ACE Valves always employs advanced manufacturing processes that include casting, machining, assembling and testing facilities to meet high quality standards of the demanding modern industries.

Split ac Valves are suitable for separated air conditioner with R22, R407C, and R410A as refrigerant, to connect indoor unit and outdoor unit, through operating valve stem clockwise, the valve will be closed, otherwise open it. It can be a checking valve to drain air and add refrigerant during maintaining, also be used in other outdoor units and are available in many sizes.

We make available the products using the exceptional quality raw material that is experts certified. This makes our product range completely reliable and genuine. We have developed several offline as well as online options for the convenience of clients to ensure faster trade.

Gate Valves are provided with properly machined and lapped backseat to ensure re-packing under pressure while fully open. Availability of Solid Wedge, Flexible Wedge, Split Wedge and Parallel Wedge designs offer maximum option to clients for suitable selection.Gaskets and Gland packing material are selected to suit service conditions like temperature, corrosion, erosion, pressure, vacuum and other applications.

• Weight: 0-500 g
• Material: Mild Iron, Fibre, Plastic, Stainless Steel
• Usage: Water, Air
• Colour: Black, White, Silver, Blue
• Size: 0-1000 MM, 1000-2000 MM
• Size: 0-10 Inch, 10-20 Inch

Valve Guides are made from Grey Cast Iron and CuZnAl-alloy material GREY CAST IRON of perlitic structure with high phosphorous content. The perlitic structure and the reticular phosphide distribution along with the good graphite formation give high wear resistance / friction less operation to the valve and improved running properties in poor lubrication condition.The available ranges are suitable for light, medium and heavy duty applications. CuZnAl-alloy Guides are with excellent wear resistance and low coefficient of friction. Used for highest stressed guides.  The available ranges are suitable for light duty applications. 

The guides are usually made of cast iron by casting process. Sometimes, shoulder bushes are provided to position the guide in cylinder head. The Valve-Guides are also available in Brass material for certain applications. 

VIKING™ offers a range of valves from both Si-Tech and Apeks according to your preference. Non magnetic versions availlable for military use.

PTFE COATINGS has got good non-stick, self-lubricating, heat resistant and chemical fume resistance. The coefficient of friction is extremely low (the lowest of all the fluoropolymers). PTFE coatings are FDA compliant for direct food contact uses. Operating temperatures are generally - 100°C To + 260°C. Other Characteristics include good abrasion resistance and Non-wetting. PTFE coating application thicknesses can range from 25 microns to 50 microns.

• Material: PVC
• Media: Powder/Solids
• Brand Name: Janatics
• Volts: 220V AC
• Power: 6VA/5VA
• Type: AC23A
• PR Range: 2-10bar

Flow Control Valves are used in pneumatic circuit to control the flow rate of air in the circuit. The most common application of these valves is in the regulation of piston speeds of a power cylinder. They are installed directly on the ports of the cylinder in such a manner that the discharge from the cylinder is restricted whereas the inlet fluid coming from the valve to the cylinder has free flow. Thus these valves are installed on the port opposite to which pressurised air is being fed to move the piston. Speed regulation of both strokes in a double acting cylinder is achieved by use of two separate flow control valves on each port of the cylinder.

Specialized Welding Techniques and consumables are employed to re-generate all areas which are eroded, worn out (especially around valve guide bush) and any other locations. Cooling water chambers are cleaned and tested at 7 bar pressure.