Instrumentation Equipment Dealers in Bandra West, Mumbai

Our company is engaged in offering Auto Starter to our respected clients. These are fabricated using high quality raw material procured from trusted vendors. Auto starter are well known for their durable and resistant nature. Provide for all types of truck and passenger car, we also offer customization services at minimal prices

• lengths: 4M

Insulated conductors are manufactured as per international practices and are designed for Indian conditions. They are finding wide acceptance due to multiple advantages they offer. MAGCO CRANES are very compact, easy to install, colour coded and flexible in installation. They are designed as per international standards of 14 mm, center distance, 4M standard lengths. They are suitable for straightcurbed sections, switchingsectionalizing assemblies etc. The conductors can be cut, bent, assembled at site for all type of installations. One or more feed points at any position possible. Joints are designed for expansion and contraction.

We offer an array of MV (Medium Voltage) switchgears that suit all medium voltage applications. The main task of medium-voltage switchgear is cost-efficiency, safe & reliable power distribution. And, this is a responsibility we accept. Our array of MV switchgears caters to a wide range of medium voltage applications such as utility substations, power plants, cement plants, metal plants, solar applications, wind farm projects etc. By taking an innovative approach, our products offer tangible advantages such as lower capital expenditure, longer life cycle, lower life cycle cost and a reduced environmental impact. Along with our LV (Low Voltage) switchgears & other range of products, we enable the realisation of smart grids thus laying the foundation for smarter energy efficient buildings, infrastructure and for greener cities. Our range of MV switchgears includes Indoor Draw out Fixed type, Outdoor type Porcelain Clad Vaccum Circuit Breaker.

Our company is engaged in offering Auto Starter to our respected clients. These are fabricated using high quality raw material procured from trusted vendors. Auto starter are well known for their durable and resistant nature. Provide for all types of truck and passenger car, we also offer customization services at minimal prices.

Compact, sturdy with an adaptable design Maintenance free & high reliability Total compartmentalized design. Provision of discharge flap with wire mesh Provision of safety interlocks Long electrical and mechanical life Conforms to IEC 62271-100 & 200 IEC 606094 IS 13118 Compatible for remote and SCADA operations Application Distribution Networks Industrial distribution Rapid auto-reclosing applications Switching duties for Capacitor, Motors, Auxiliary Generator Units for Power Plants

• Type: Automated Switch Panel
• Number of Button: 4

We are offering position transmitters which can be used to monitorcontrol the position of damper gate reclaimer position length of wire rope woundunwound by winch hoist position grab bucket opening etc. Position transmitter gives out 0- 10 volt4 – 20 ma current signal depending upon position of shaft. Digital pulses can also be provided. Position accuracy +- 0.1 %. It also provides two settable alarmsprovides potential free relay contacts. The position transmitters are manufactured in ip 65 protection class. Many of position transmitters are working in cement industry, crane industry, winch manufacturers and engineering industries.

We offer IM3700 Series Temperature Humidity Loggers that are highly versatile monitoring & recording units. Controllers can accept input from different type of Humidity sensors also from RTD sensor for Dry Bulb Wet Bulb measurement technique. Moreover, these loggers are used for monitoring temperature of green rooms, server rooms, clean rooms, storage rooms & environment chambers in various industries such as textile, cement, pharmaceutical & logistics.

• Color: Silver
• Application: Industrial
• Country of Origin: Made in India
• voltage: 12 V

We are offering Temperature Sensors for solar applications. We have various types of Temperature Sensors, ranging from pt 100, thermocouples (j,k,r,s,t) to thermistors. These sensors are available ex-stock with us.Types of Temperature Sensors : PT 100, J,K,R,S,T Thermocouples, Thermistors

With the advancement of technology, we have also adopted a secure payment procedure that is easy to use and featured with multiple options. Since the day of our inception, we are engaged in supplying dc motor drives and offering the same at competitive rates.

We are the leading Manufacturer and Supplier of efficient Fire Alarm Control Panel. The Fire Alarm Control Panel is the Central Monitoring Station where all signals are received and transmitted. It is important that the person responsible for taking action, should know exactly where and what the problem is, as soon as he receives a signal from the panel, given below are the details of how to interpret the various lights and switches on the panel fascia.

• Material: Plastic, Stainless Steel
• Length: 4mtr
• Color: Available in many Colors
• Application: Industries
• Feature: Durable

• Brand Name: A.d's
• Condition: New
• External Body Size: 9.5 Inch (w) X 5 Inch (h) X 12 Inch
• Electrical Input: 230 Vac/ 50 Hz, with Proper Earthing.
• Memory: All Settings Used in Earlier Session is Stored & Displayed When Machine is Switched On Again
• Cuffs: 5 Numbers Silicon Cuffs

Salient features:- 1)     1MMHg controlling (resolution) 2)     Single & dual cuff tourniquets are available for all surgeries. 3)     Very reliable controlling system is used for perfect pressure. 4)     Rugged compressor. 5)     User friendly interface. 6)     Feathers touch keys. 7)     Very bright indicators. 8)   Highly stable & compact power supply, hence machine Can be used   anywhere, where voltage fluctuations are more. 9)     Inbuilt memory to store earlier settings. 10) Air leakage indicator to show air leakage in the cuffs & tubes. 11) Gradual pressure settings & gradual release system. 12) Online increase & decrease of pressure, timer, exhaust. 13) Beep after each 15minuts. 14) After presetted time is complete 1 minute extra time count is provided. 15) On completion of total sited time buzzer beeps continuously but pressure will be maintained at the same level, also it will not be released. 16) Cuff pressure will not be released on power failure. 17) Can be used with inverter power supply & generator. 18) Both hardware & software based exhaust available. 19) We provide 5 numbers of silicon cuffs (life time guarantee on joins) with machine. 20) Light weight machine, easy to carry anywhere. 21) Low power consumption. 22) Can be used for all types of patients (any physical condition) 23) Lowest risk to patient when compared with other machines. Technical specifications:- 1)     Settable pressure range 50mmhg to 650mmhg in steps of 10mmhg.   2) On line setting allows online settings of cuff pressure, timer & exhaust. 3) Pressure resolution 1mmhg.   4) Timer safe mode 1 minute to 6 hours in 15 minutes steps.   5) Alarms beep after each 15 minutes, total time out, exhaust mode, &    air leakage mode.Operating modes visual indications:-   A:-air leakage in either cuffs or in the tubes.   O:-operating mode (normal operating)   T:-timer mode.   S:-setting of cuff pressure mode.   E:-exhaust mode. (Software or hardware)  

Vacuum Circuit Breakers, kiosk systems, Indoor VCB Panel

standard : ( bs 5308 part I & part ii) conductor : (is 8130) high conductivity electrolytic grade annealed bare/tinned copper. Solid / stranded/ multi stranded conductor. insulation : (is 5831) : type a, b, & c general purpose pvc (poly vinyl chloride) hr/ fr/ lszh/ pe compound, or as per customer specification. colour coding : (pair/triad/quad) either colour coded or number printed , coloured ring marked or as per customer requirement. laying of pair/ triad /quad : pair/ triad/quad are laid up with suitable lay. Polyester film / melenex tape is provided to bind up laid up pair / triad / quad. shielding /screening : shielding/screening of thin layer of alluminum foil bonded to polyester film / tape with annealed tinned copper drain wire is installed to provide continuous contact with the shield/screen and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and the shield / screen. inner sheath: (is 5831) : type “ c” (pvc) or type st -1 or st-2 ( hr/frls) the laid up pair/triad/quad after shielding/screening are provided with an inner sheath. This may be either extruded inner sheath or wrap with pvc tape. armouring : ( is 3975) armouring is applied over inner sheath, it may consist of galvanized round steel wire or galvanized flat steel strips. outer sheath : (is 5831) : type “ c” (pvc) or type st -1 or st-2 ( hr / frls) outer sheth is applied over armouring in case of armoured cables or over inner sheath , in case of unarmoured cables. The colour of outer sheaths is generally black/ blue/ red/ gray. The sheath material may be general purpose pvc/hr/ frls/lszh compound . application : data transmission, process control systems, communications systems etc. range : 0.5/ 0.75/1.0/1.5/2.5 sq mm up to 48 pair.

Our respected firm is widely applauded in the industry for providing a comprehensive collection of Festoon cable

• Display: 7 segment LED display / Alphanumeric LCD display / Graphic LCD display
• Sensor Inputs: Thermocouple / RTD Pt100 / Pt1000 / Cu53
• Memory: 32k / 64k / 2MB / USB Flash
• Connectivity: RS232 / USB / RS485 / Ethernet TCP/IP
• Options : SMS alarm / Serial Printer / Centronics Parallel printer
• Log interval: Minute. Seconds / Hours. 
• Supply: AC Mains operated / DC Operated / Battery Operated
• Enclosure: Panel Mount / DIN Size / Wall mount / Table Top

Types Motor Control Center are of three types. 1 Single front with rear access. 2 Single Front without Rear access. 3. Double front with both access. MCC is also designed as Compartmentalized or Non- Compartmentalized stayle. Construction Manshu offers Modular Panels for Motor Control Centre. The modular design has, Frame, Base, Doors, Cover, etc. and all are removable, changeable. 1. Main Body is made from M6h Structure frame: Color: Satin black 2. Base: 75mm Color: Satin black 3. Doors: 1.5mm. Color: Siemens Gary RAL7032 Powder Coated 4. Mounting Plate: 2mm thick, Color: Orange Powder Coated 5. Locks: Four Point lock with handle & key or cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Frame is made of M6h design multi fold construction. This offers very high strength which is required for heavy components like Air Circuit Breaker, Copper Busbars etc. Also, this takes care during short circuit condition against various mechanical distortion forces. Base Base is made of 75mm ISMC channel. Modularity is the main feature of Manshu’s panel. All vertical and horizontal frame members have Punching at 25mm pitch. This gives large flexibility during design, manufacturing and eases modification at site if required. Advantages Panel is very flexible. Expansion is very easy on both sides of Panel and can be expanded at Rear & Top in our factory as well at site. Enclosure Sizes Width of each section is from 300 to 1200mm, Height 2000 or 2300 mm + Base and depth is from 450 to 1600mm. Ingress Protection IP 32 and IP 42 are most suitable for good ventilation, however, IP 54 is also offered. Designing Manshu’s design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility All facilities are available In-house. Type Tests Panels are tested at CPRI and ERDA for 65kA for 1 sec, 50kA for 1 sec, IP 55, IP 56, IP 67. Largest Size Panel Executed 1. Incomer 2500A ACB, 50kA for 1 sec. Length 12000mm. 85 feeders. Double front. 2. Incomer 1600A ACB, 50kA for 1 sec. Length 8000mm. Single Front rear maintenance. 3. Incomer 400A MCCB , 35kA for 1 sec. Length 5000mm. Single Front Dead Back. Maximum Size of Panel We can manufacture any length of panel. However in our factory we can assemble 45000mm panel for testing.

Banking on the expertise and acknowledgement of our trained experts, we are readily instrumental in the arena of offering a neatly stitched variety of Semi Automatic Control Panel. Features : Corrosion resistance Industry approved designs Seamless built Robust construction Precisely designed Durable nature

• Material: Mild Steel
• Automation Grade: Automatic
• IP Rating: IP33
• Operation Voltage: 415V
• Surface Finish: Polished
• Mounting Type: Horizontal

We are offering fire control panel. Conventional apollo make fire alarm control panel 2 zone / 4 zone & 8 zone.

• Material: Copper
• Thickness: 1mm to 60mm
• Electric Grade: ETP Grade
• Surface Treatment: Polished
• I Deal In: New Only
• Width: 5mm to 350mm

• Features: Quality-tested,Affordable,Easy to install

Ultra Servo Sachet Machine with Servo Auger Filler for Powders like Turmeric Powder, Flours, Talcum Powder, Ground Spices, and almost any fine powder.

We manufacture a wide range of starter control panels, mcc panels, junction boxes. Panels are tailor made to suit the requirements of each customer and the site conditions. We are distributors located in Mumbai for a wide range of Xylem Flygt submersible, dewatering, slurry, sewage pumps and submersible mixers. Flygt is the flagship brand of Xylem and the worlds no 1 submersible pump manufacturer. We have standard Flygt pumps in ready stock. Our service technicians ensure local service backup in India for these highly sophisticated Flygt pumps. Our repair workshop at Chiplun, India has facilities to repair Xylem Flygt submersible pumps and mixers.  

• Type: C Heater Climate Control Panel Switch
• Certification: CE Certified, ISO 9001:2008
• Color: Black
• Condition: New
• Driven Type: Battery
• Application: For Car

Copper Bus Bar offered can be made available by us in different configuration choices in terms of thicken, length, width as well as grade of copper used as per the specificationsprocess needs at client’s end. We ensure these are available in proper lengths and configuration with support for onemore take-off points connected to equipment. Some of its features include superior physical and mechanical properties; choice of different size and configurations; provide for energy-efficient performance; superior design finish as per industry standards.

2.400-2.4835GHz, 4 year life, Reading Distance >80m,Waterproof IP67

Features Thermocouple Extension, Compensating cables Signal cables Control cables Instrumentation Power cables