Instrumentation Equipment Dealers in Carter Road, Mumbai

• Types of Temperature sensors: PT 100, J,K,R,S,T Thermocouples, Thermistors

We are offering temperature sensors for solar applications. We have various types of sensors ranging from pt 100, thermocouples ( j,k,r,s,t ), thermistors and are available ex - stock with us

We are providing DC Drives Repair Services.

We are offering position transmitters which can be used to monitorcontrol the position of damper gate reclaimer position length of wire rope woundunwound by winch hoist position grab bucket opening etc. Position transmitter gives out 0- 10 volt4 – 20 ma current signal depending upon position of shaft. Digital pulses can also be provided. Position accuracy +- 0.1 %. It also provides two settable alarmsprovides potential free relay contacts. The position transmitters are manufactured in ip 65 protection class. Many of position transmitters are working in cement industry, crane industry, winch manufacturers and engineering industries.

• Brand Name: A.d's
• Condition: New
• External Body Size: 9.5 Inch (w) X 5 Inch (h) X 12 Inch
• Electrical Input: 230 Vac/ 50 Hz, with Proper Earthing.
• Memory: All Settings Used in Earlier Session is Stored & Displayed When Machine is Switched On Again
• Cuffs: 5 Numbers Silicon Cuffs

Salient features:- 1)     1MMHg controlling (resolution) 2)     Single & dual cuff tourniquets are available for all surgeries. 3)     Very reliable controlling system is used for perfect pressure. 4)     Rugged compressor. 5)     User friendly interface. 6)     Feathers touch keys. 7)     Very bright indicators. 8)   Highly stable & compact power supply, hence machine Can be used   anywhere, where voltage fluctuations are more. 9)     Inbuilt memory to store earlier settings. 10) Air leakage indicator to show air leakage in the cuffs & tubes. 11) Gradual pressure settings & gradual release system. 12) Online increase & decrease of pressure, timer, exhaust. 13) Beep after each 15minuts. 14) After presetted time is complete 1 minute extra time count is provided. 15) On completion of total sited time buzzer beeps continuously but pressure will be maintained at the same level, also it will not be released. 16) Cuff pressure will not be released on power failure. 17) Can be used with inverter power supply & generator. 18) Both hardware & software based exhaust available. 19) We provide 5 numbers of silicon cuffs (life time guarantee on joins) with machine. 20) Light weight machine, easy to carry anywhere. 21) Low power consumption. 22) Can be used for all types of patients (any physical condition) 23) Lowest risk to patient when compared with other machines. Technical specifications:- 1)     Settable pressure range 50mmhg to 650mmhg in steps of 10mmhg.   2) On line setting allows online settings of cuff pressure, timer & exhaust. 3) Pressure resolution 1mmhg.   4) Timer safe mode 1 minute to 6 hours in 15 minutes steps.   5) Alarms beep after each 15 minutes, total time out, exhaust mode, &    air leakage mode.Operating modes visual indications:-   A:-air leakage in either cuffs or in the tubes.   O:-operating mode (normal operating)   T:-timer mode.   S:-setting of cuff pressure mode.   E:-exhaust mode. (Software or hardware)  

• Country of Origin: Made in India
• Display Type: LCD
• Maximum Input-power: 27 VA
• Usage/Application: PLC
• Mounting Type: Panel Mount
• Output Type: Digital
• Number of Inputs: 9 Digits

• Type: Automatic
• Application: Automobile Use
• Display Type: Digital
• Frequency: 50Hz
• Driven Type: Electric
• Temperature Range: 0-100°C
• Certificate: CE Certified
• Current Type: AC, DC
• Accuracy: 100%
• Warranty: 1 Year

• Material: Plastic, Stainless Steel
• Length: 4mtr
• Color: Available in many Colors
• Application: Industries
• Feature: Durable

We are the leading Manufacturer and Supplier of efficient Fire Alarm Control Panel. The Fire Alarm Control Panel is the Central Monitoring Station where all signals are received and transmitted. It is important that the person responsible for taking action, should know exactly where and what the problem is, as soon as he receives a signal from the panel, given below are the details of how to interpret the various lights and switches on the panel fascia.

• Dimension: 640 mm X 640 mm X 110 mm,700mm X 700mm X 165mm
• Circuit Voltage: 24V DC,24V & 12V DC

surgeon control panel– we are surgeon control panel manufacturer in mumbai. We manufacture and supply a wide range of surgeon control panel. We are manufacturing the membrane type, touch glass, touch screen type and monochromatic graphic touch screen panels. membrane type: bio-x surgeon control panel has been designed to cope with technology and equipment in operating environment. It is designed to be user friendly and ease of operating & maintainingpurpose. Control panel comprising of following. User can choose any of the services as per their requirements.1. Daytime digital clock elapsed2. Time digital clock3. Temperature and humidity indicator4. Peripheral light controller5. Medical gas alarm (hi/low/normal)6. Lcd hands free telephone   specificationdimension : 640 mm x 640 mm x 110 mmcircuit voltage : 24v dcdigital clock : green color display (1.8 “character hh:mm:ss) (set-up-down)elapsed clock : red color display (1.8 “character hh:mm:ss) (start-stop-reset)light control : 3 channel (2 for peripheral light & 1 for plan air) 0-10v dimming rangetemp/humd. : display room temp. & humidity with controlling outputs for both temp. & humd.gas alarm : 5 channel (4 gases + 1 vacuum) (high / low / normal indication)hands free phone : dialing & receiving calls with caller id   touch glass type: bio-x surgeon control panel has been designed to cope with technology and equipment in operating environment. It is designed to be user friendly and ease of operating & maintaining purpose. Being made from glass its extremely hygienic and easy to clean. The chances of the keys getting spoilt in the membrane type panel because of constant pressing is eliminated in the touch glass control panel. Control panel comprising of following. User can choose any of the services as per their requirements.1. Daytime digital clock elapsed2. Time digital clock3. Temperature and humidity indicator4. Lighting control5. Medical gas alarm (hi/low/normal)6. Lcd hands free telephone   specificationdimension : 685 mm x 745 mm x 120 mmcircuit voltage : 24v dcdigital clock : green color display (1.8 “character hh:mm:ss) (set-up-down)elapsed clock : red color display (1.8 “character hh:mm:ss) (start-stop-reset) light control temp/humd. : display room temp. & humidity with controlling outputs for both temp. & humd.gas alarm : 5 channel (4 gases + 1 vacuum) (high / low / normal indication)hands free phone : dialing & receiving calls with caller id surgeon control panel touch screen: a] with the touch sensitive monitor, which can be operated directly at the touch of a finger, operating and monitoring of ot parameters like temperature, humidity is now very simpler. The graphical interface is capale of displaying all kinds of complex topologies. The status and command information is presented in a manner that is well structured and clear. The end result is an overall system that is both modular and flexible, enabling it to be adapted or expanded, or to accommodate new technologies.   specificationdimension : 700mm x 700mm x 165mmcircuit voltage : 24v & 12v dcdigital clock : (hh:mm:ss)elapsed clock : (hh:mm:ss) (start-stop-reset)separate switch for display on/offlight control : 3 channel (2 for peripheral light & 1 for plan air)0-10v dimming range 2 channel (2 for ot light on/off)temp/humd. : display room temp. & humiditygas alarm : 5 channel (4 gases + 1 vacuum)(high/low/normal/indication)hans free phone : dialing & receiving calls with caller idhepa filter : shows hepa filter status (normal/choke)music player : plays mp3 & other supported files   this micro controller based electronic control panel is mounted directly on the theatre wall.     b] we also import the 27'' touch screen panel form samsung and have customized the software so as to incorporate the following features:   the following features are incorporated in the control panels.1. Operation timing - elapsed time.2. Anesthesia countdown - countdown timer3. Time - real time clock4. Date5. Temperature and humidity control and display6. Hands free telephone7. Medical gas alarm system8. Lighting control - peripheral, showless dome, plenum light, view box withbrightness control

Our company is engaged in offering Auto Starter to our respected clients. These are fabricated using high quality raw material procured from trusted vendors. Auto starter are well known for their durable and resistant nature. Provide for all types of truck and passenger car, we also offer customization services at minimal prices

automatic tempertature control systems

• Features: Microcontroller based Digital Circuitry. Continuous Time display. Dust proof membrane keypad. Upto Three built in relay outputs rated 230 V / 5 A. Easy to Install. User friendly and Easy to Operate.
• Display: 4 digit LED display.
• Battery back up: 10 years
• Override Switch: Manual
• Size: 96(W) x96(H) x 100(D) mm

• Material: Mild Steel
• Automation Grade: Automatic
• IP Rating: IP33
• Operation Voltage: 415V
• Surface Finish: Polished
• Mounting Type: Horizontal

Our wide area network helps us in delivering the products across Maharashtra(India) and other markets. Advanced transportation facilities, efficient workforce, on time delivery of the products make us stand out from the crowd.

• Type: Automated Switch Panel
• Number of Button: 4

Banking on the expertise and acknowledgement of our trained experts, we are readily instrumental in the arena of offering a neatly stitched variety of Semi Automatic Control Panel. Features : Corrosion resistance Industry approved designs Seamless built Robust construction Precisely designed Durable nature

Our respected firm is widely applauded in the industry for providing a comprehensive collection of Festoon cable

The Fire•Lite MS-25(E) is a Fire Alarm Control Panel (FACP) and Digital Alarm Communicator/Transmitter (DACT) combined into one circuit board. With an extensive list of powerful features, the MS-25 fits into applications previously served only by conventional panels. This compact, intelligent addressable control panel supports up to 25 Honeywell Fire Systems addressable devices of any type of detectors and modules. With code wheel addressable detectors/modules and JumpStart® feature the MS-25 can be Life Safety operational without a single programming tool. Powerful features such as drift compensation and maintenance alert are delivered in this powerful FACP from Fire-Lite. The MS-25's integral DACT transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The power supply and all electronics are contained on a single circuit board and housed in a metal cabinet. Custom programming can be performed through FACP built-in browser (no programming software required) with a PC. NOTE: Unless otherwise specified, the term MS-25 is used in this data sheet to refer to the MS-25 and the MS-25E. For details on the Canadian version, see DN-60641.   features • Two independently programmable output circuits. Circuits can be configured for the following outputs: – Style Y (Class B). – Door Holder Service (cannot be used for notification appliances). – Aux Power Source (cannot be used for notification appliances). • Silence Inhibit and Auto-silence timer options. • Continuous or Temporal code. • Selectable strobe synchronization per NAC. • Up to 2.0 A total output power, 1.0 A for auxiliary power and door holder. Each circuit can source up to the total system current 2.0 A.   specification • ETL listed to ANSI/UL 864 9th Edition Standard • Listed to UL Standard 864, Ninth edition. • JumpStart® auto-learn feature reduces installation time and makes programming easy. • Built-in digital communicator. • Two programmable Style Y (Class B) notification appliance circuits (NACs). • Selectable strobe synchronization for System Sensor®, Gentex®, Wheelock® or AMSECO devices. • Two programmable Form-C relays and one Form-C trouble relay. • Automatic detector sensitivity testing (NFPA 72 compliant). • Point status eliminates calibrated smoke test requirements for NFPA 72. • Drift compensation. • Alarm verification per zone of detectors. • Walk-test. • Honeywell Fire Systems detectors and modules are codewheel addressed for faster installation time. • Maintenance alert region. • Uses standard wire (unshielded or twisted pair). • Central Station reporting up to five zones. • On Board Annunciator.

standard : ( bs 5308 part I & part ii) conductor : (is 8130) high conductivity electrolytic grade annealed bare/tinned copper. Solid / stranded/ multi stranded conductor. insulation : (is 5831) : type a, b, & c general purpose pvc (poly vinyl chloride) hr/ fr/ lszh/ pe compound, or as per customer specification. colour coding : (pair/triad/quad) either colour coded or number printed , coloured ring marked or as per customer requirement. laying of pair/ triad /quad : pair/ triad/quad are laid up with suitable lay. Polyester film / melenex tape is provided to bind up laid up pair / triad / quad. shielding /screening : shielding/screening of thin layer of alluminum foil bonded to polyester film / tape with annealed tinned copper drain wire is installed to provide continuous contact with the shield/screen and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and the shield / screen. inner sheath: (is 5831) : type “ c” (pvc) or type st -1 or st-2 ( hr/frls) the laid up pair/triad/quad after shielding/screening are provided with an inner sheath. This may be either extruded inner sheath or wrap with pvc tape. armouring : ( is 3975) armouring is applied over inner sheath, it may consist of galvanized round steel wire or galvanized flat steel strips. outer sheath : (is 5831) : type “ c” (pvc) or type st -1 or st-2 ( hr / frls) outer sheth is applied over armouring in case of armoured cables or over inner sheath , in case of unarmoured cables. The colour of outer sheaths is generally black/ blue/ red/ gray. The sheath material may be general purpose pvc/hr/ frls/lszh compound . application : data transmission, process control systems, communications systems etc. range : 0.5/ 0.75/1.0/1.5/2.5 sq mm up to 48 pair.