Instrumentation Equipment Dealers in Dongri, Mumbai

• Driven Type: Electric
• Accuracy: +/- 4 Deg C Accuracy From 0 Deg C To +70 Deg C
• Usage/Application: Industrial
• Package: SC-70 Package
• Item Code: MCP9701-E/TO
• Operating Voltage: 3.1V to 5.5V
• No of Pins: 3 pin to-92 pacakge
• Linear Temperature Slope: 19.53 mV/ deg C
• Operating Current: 12 microA (max)

• Certification: CE Certified
• Application: Industrial Automation
• Color: Blue
• Condition: New
• Warranty: 1year

Analogue Temperature Transmitter, we offer, is employed in the sectors pertaining to plant construction, power engineering, air-conditioning, ventilation, heating, refrigeration, etc. The equipment is well inspected on all the crucial parameters such as longevity, durability, operational efficiency, structural robustness, etc. We, as a Supplier of Analogue Temperature Transmitter in Mumbai, Maharashtra, tackle the orders for the machine in the stipulated timeframe. Features : Versions for Pt100 Configurable measuring ranges (solder bridges) Error signaling in the event of sensor break and sensor short-circuit Large ambient temperature range Compact and value for money

LT Aerial Bunched cables, also known as LT AB Cables, are distinct from bare conductor overhead distribution. They are good for distribution of electricity to residential, commercial and industrial units. These cables have overcome limitations of PVC insulated cables such as thermal degradation, poor moisture resistance and thermoplastic nature. LT AB cables have higher current rating, higher short circuit rating approximately 1.2 times that of PVC. LT AB Cables have lower cost of laying because of comparatively smaller diameter of cable and higher weight. Installation charges are also low as diameter of the cable is comparatively lesser with smaller bending radius, requiring less space. For longer cable length voltage drop, one size lower cables can be used as compared to PVC insulated cable. LT AB CABLE - FEATURES AB cables are highly reliable and insulation has been developed to withstand extreme cold and intense sunlight. Disturbance and faults occur five to ten times more often in open wires lines than in AB cable lines. There is no risk in touching the live cable and the insulation reduces the number of short circuits and over voltage faults in overhead cables during thunderstorms. Few hardware accessories are needed which are different for different size of cables. Streets can be lit only at little extra conductor for lighting. The cable can be supplied with one or two insulated conductors for street lighting. Convenient Usage In electricity theft prone areas. As replacement of bare lines in rural area & narrow street with limited space. As replacement of bare lines where reliabilities of support is of prime importance. In hilly terrain here cost of erection of overhead lines or under ground cable becomes very high. As reinforcement of existing system with increase in voltage/current carrying capacity. For temporary supplies.Advantages In comparison with bare overhead distribution line AB Cable has very high reliability in maintaining power services because power and neutral conductors are insulated with the best dielectric, resulting in the following advantages: Less fault rate on account of good protection against line and ground faults by high winding falling trees or birds specially in hilly areas and forests. High insulation resistance to earth in all seasons. Neglible lekage currents and low losses. Multiplexer circuits of power and telephone cables could be in the same set of poles. Better adaptability to laid besides with existing overhead bare conductor system without any interference. High capacitance and low inductance leading to low impedance of lines. Lower voltage drop, higher current carrying capacities vis-à-vis better voltage regulations. Longer spans and longer distance lines are possible with better system stability. AB cables are much safer than bare conductors. It can be laid in dense vegetation and forest areas. Additional connections can be easily and quickly made with hot line connectors. Overall lines cost is reduced. Maintenance is very convenient. Very difficult to tap the AB cables, thus reducing theft which leads to lower distribution losess. Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire, the operating temperature of the conductor is 90 c as against 75 c thereby allowing AB cable to carry current equivalent to that of bare conductor of the same size.

• Country of Origin: India
• Brand Name: RS PROCESS SYSTEMS PVT LTD
• Certification: ISO9001
• Resolution: 0.1
• Warranty: 1YEAR
• Advantage: 100 % Repairable after sales
• Size: 96x96x110mm
• Material: cabinet :-Alluminium Anodised
• Type: pannel mounting

RSPSPL Recorder products serves industrial market requirements for high quality data acquisition and monitoring products and systems. Incorporating the latest in color 3.5" LCD technology and data storage media, our range of recorders have always lead the way in this dynamic marketplace. Our data acquistion products are supported the the powerful DAS, a suite of Windows - based PC software packages, which provide extensive data analysis, graphing, and archiving facilities. Datalogger are available in 8/16 channel configuration with 3.5"/5.7 " Color Touch TFT Display & further 24/32/48.....64 channel in 7.5 " Color touch screen  All datalogger have USB Pen drive INTERFACE to take data in pen drive & also RS485 for datatransfer to p.c Pannel Cut out Size :-96x96x110mm & 265x180x80mm mounting :-Pannel

• Thickness: 0.8 - 1 mm
• Material: Copper Wire
• Features: Dimensionally accurate,Rust-proof, Seamless finish .
• Length: 2,000 mm
• Width: 12 - 32 mm

Aluminium products: aluminum bronze nuts, aluminium bronze fasteners, aluminum bronze ca 104, aluminium bronze ingots, aluminum bronze scrap, aluminium bronze bushes, aluminum bronze bolts, aluminium bronze round bars.

• Size: Multisizes
• Type: Electric Control Panels
• Color: Grey, White
• Voltage: 110V, 220V, 380V
• Material: ABS, Mild Steel
• Power: 3-6kw, 6-9kw
• Power Source: Battery
• Phase: Double Phase, Single Phase, Three Phase
• Warrenty: 2 Years, 5 Years
• Autoamatic Grade: Automatic, Fully Automatic

We are offering terminal, control switches & contact elements, push buttons, cable tie, lugs, spiral cable sleeves, cable sleeves.

• Brand Name: SUPERMAGNET

Aluminum Flat Bars Approx Price: Rs 170 /Kilogram Product Details: Anodised Yes Dimensions (l x b x h) 6.5 mm X 400 mm * 3 mm to 200 mm * 10 to 12 Feet Application Petrochemicals plants, Power plants, Printing companies, Fertilizer We are one of the suppliers of Aluminum Flat Bars, which are highly appreciated for their high durability.  Features: ·         Corrosion resistance ·         Excellent mechanical properties ·         Dimensional tolerance  

• Material: Steel
• Thickness: 0-20mm
• Application: Automobiles
• Finishing: Coated
• Feature: Heat Resistance
• Technics: High Density Polyethylene

We are one of the leading trading copper busbars. Busbars are produced in a variety of shapes such as flat strips, solid bars and rods, solid or hollow tubes, and braided wire some of these shapes allow heat to dissipate more efficiently due to their high surface area to cross-sectional area ratio. A busbar must be sufficiently rigid to support its own weight, and forces imposed by mechanical vibration and possibly earthquakes, as well as accumulated precipitation in outdoor exposures.

• Material: Copper
• Thickness: 10 - 50 mm
• Width: 50mm to 350mm
• Usage/Application: Industrial
• Purity: 98%
• Tensile Strength: 220 Mpa

We offer an assortment of aluminum Busbar in various sizes, width and thickness. These can also be customized as per the specifications of the customers. Our aluminium Busbar are widely used in diverse industries due to their high tensile strength, unmatched quality and durability.

Stainless Steel 304/ 316/ 316L Tubes with one end closed for Temperature Sensors / Thermistors / Probe Tubes. Available in all diameters from 1.20mm to 8.0mm and in all lengths from 15mm to 300mm

• Country of Origin: Made in India
• Color: grey
• Size: 8\' x 4\'
• Thickness: 6mm to 25mm
• Surface Finish: Matte
• Brand: Bison

• Material: Copper
• Shape: Rectangular
• Brand: Sun Impex
• Usage/Application: Industrial
• Tolerance: 0.5%
• Finishing: Polished

The Copper Bus Bars, offered by us, are durable and non-corrosive in nature. We are a reputed Manufacturer, Exporter and Supplier of Copper Bus Bars in Maharashtra, India. Offered by us in a number of specifications, our Copper Bus Bars are used in switchgear, transformers, panels, earthing, etc. We have maintained a huge stock in our spacious warehouse in order to meet even the urgent and bulk requirements of the buyers.

• Material: Aluminium
• Thickness: 1-100mm, 100-200mm
• Length: 1-1000mm, 1000-2000mm
• Application: Construction, High Way, Subway
• Color: Grey
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, Flawless Finish
• Dimension: 1-500mm, 1000-1500mm

We offer Aluminium Extruded Bus Bar in different grades such as 991050, 996101, 63401, 91E, and D505. Aluminium Bus Bar is an Electrical Grade Tubular & Flat Bar known for its excellent electrical conductivity and bending properties. These Aluminium Bus Bars are used in switchgear, earthing, and other electrical bus bar application and related industries. These Aluminium Bus Bars are made available in different sizes, thickness, width, as per the requirement of the esteemed clients.

Based in Mumbai, Maharashtra, we are one of the leading manufacturers, suppliers and exporters of Tinned Copper Bus Bars. We offer tinned copper bus bars from highly conductive copper in different specifications based on the requirements of our clients. The copper bus bars are of optimum quality and are made in compliance with the standards. We make deliveries to our clients within the required time frame.   Brass Cable Gland Kits & Accessories : BW Cable Gland (2 Part) BW Cable Gland (3 Part) CW Cable Gland (3 Part) CW Gland (4 Part) E1W Cable Gland A1 / A2 Cable Gland Gland Kit PVC Shroud Lock Nut Earthing Tag Marine - Use Watertight Cable Glands Single Compression Type Brass Cable Gland For Unarmound Cable Nickle Plated Brass Gland - IP68 Rating - Metric Thread Nickle Plated Brass Gland - IP68 Rating - PG Thread Wiping Gland Nickle Plated Brass Cable Gland With PG Thread For Unarmored Aluminium Cable Glands Line Taps / Split Bolts Split Bolt Connector With Round Head Earth Bar Brass Neutral Link / Neutral Bar / Connector Brass Earthing Terminals

Plain & flanged bushes and parts, self aligned bushes, & different profile components as per drawing samples.

• Surface Finishing: Polished
• Shape: Square

      We are stockiest and supplier of various range of sizes and shapes of copper bus bars. Our manufacturing process is pass quality checking to ensure that our clients get best products with excellent tolerance, corrosion resistance and durable. Find below specification for copper bus bars.

We cater to high precision Resistance Temperature Detector that is used in a number of industries. The Resistance Temperature Detector is manufactured & available in Simplex, Duplex and Triplex configuration. We also offer Pt 1000 Platinum RTD depending upon the requirement.

• Thickness: 1mm to 60mm
• Size - Width: 5mm to 350mm
• Edge: Square Edge, Radius Edge, Full Radius
• Edge Length: Up to 6400mm (21`)
• Standard overall cutting tolerance: 100mm
• Weight: Weight per feet in kg
• Standard & Material: JIS, BS EN, DIN, ASTM, AS/NZS and TIS
• Presence of copper content: 99.99%
•  :  

We are one of the leading manufacturer, suppliers & exporter in High Quality Copper Bus Bars in Mumbai, India. Copper bars used to connect earth rod or pipe to a subject to be earthed and to be used as phase conducter.Being a pure Copper having 99.9% copper contents these are highly conductive, so they can withstand a fault current of very high capacity. We Offered bus bar can be customized as per the specifications of our esteemed clients. These bars are extremely durable and strong. They unique design makes them highly resistant to corrosion. Copper Bus Bars Copper Bus Bars Copper Bus Bars   General Properties : Size - Width : 5mm to 350mm Thickness : 1mm to 60mm Edge : Square Edge, Radius Edge, Full Radius Edge Length : Up to 6400mm (21`) Standard overall cutting tolerance : 100mm Weight : Weight per feet in kg Standard & Material : JIS, BS EN, DIN, ASTM, AS/NZS and TIS Presence of copper content : 99.99%     Application Range : •   Bus Bars•   Transformer Connectors•   Earthing Protection in L.T. and H.T. Electrical Panels •   Power Transmission equipment•   Control Panels Copper Bus Bars  

• Material: Aluminium
• Thickness: Upto 200 mm
• Insulation: PVC

We are offering sensors.

• Thickness: 6mm-25mm
• Width: 20mm to 170mm
• Length: 1-12m, or as required
• Application: Power Distribution, Telecommunication , Automotive Industries
• Edge Type: Square Edge, Full Radius Edge, Radius Corner Edge