Instrumentation Equipment Dealers in Matunga, Mumbai

Real Time Switches are the timers which are capable to perform on off actions at real time, they are used to switch electrical appliances like corridor lights, garden lights, street lamps, neon signs etc at preproraamed time of the day. User need not programme the unit from time to time, since the timer has built in almanac timings fixed in nonvolatile RAM. This has added advantage in Real time switch over daily dial or weekly timers. RTS has two outputs, with which user can drive contractors of different ratings. Desired output can be achieved using different combinations. Timer is provided with manual override facility. To avoid unauthorized access, optional detachable external keyboard can be provided.

• Application: Hospital Use
• Weight: 0-5kg, 20-40kg, 5-10kg
• Voltage: 110V, 220V
• Condition: New
• Automatic Grade: Automatic
• Power: 100W, 200W, 500W
• Driven Type: Electric
• Warranty: 5yrs

  We are an eminent Nurse Call System Manufacturer, exporter and Supplier based in India.For those vital minutes in providing treatment to the patients, Medical Gas Pipeline Services introduces the digital Nurse Call System for multi specialty large hospitals that is the picture of quiet efficiency. System Configuration WALL UNIT - This module is installed at each bed Sleek design aluminum panel with screw attachment Multi-color powder coating Front Panel with 3 color indicators Red : Call Green : Ready Yellow : Wait Reset switch Hanging cord PATIENT SWITCH - Installed at the nursing station Microprocessor based technology Aluminum power coated enclosure Table top or wall mounted design Parts of the central monitor Bright red digital display for bed numbers Single 3 Sec beep on call or Periodic beep Acknowledgement switch on the monitor Flashing display on call & freeze mode on wait. Central monitor available in 10, 20, 30, 40, beds capacity Siren mode if the patient is not attended after providing wait signal Electrical Installation The system works on 4 core shielded single wire which is laid from every bed to the nursing station through concealed conduits The central monitor works on 230v 50 Hz supply Only DC voltage is supplied to the wall unit and patient switch to eliminate the risk of micro shocks & leakage current shocks The system is fully hassle-free & user friendly After installation it is kept ON 24x7 and 365 days for the benefit of the patients

• Application: Packaging
• Condition: New
• Model Name/Number: Delta HMI
• Brand: Delta
• Screen Size: 4, 4.3, 7, 10 inch
• WARRANTY: 1 YEAR
• Product Type: HMI
• Product Type 1: TOUCH PANEL
• Product Type 2: Human Machine Interface

We are providing DC Drives Repair Services.

Technokaar solutions & services provide electronic access control system to protect your organization, offices, public buildings,hospital,the retail sector, school & colleges etc.our products/solutions are used by various companies to achieve greater profitability.

Datalogs up to 32,000 temperature readings with a user programmable sample rate. Selectable data sampling rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr. User-programmable alarm thresholds. Status Indication via Red/Yellow LED and Green LED. Long battery life (approx. 1 year).Complete with 3.6V Lithium battery, protective USB cap, mounting bracket, and Windows® compatible analysis software.A Quality product from Extech, USA.

• Material: Plastic, Stainless Steel
• Length: 4mtr
• Color: Available in many Colors
• Application: Industries
• Feature: Durable

• Certification: CE Certified
• Application: Temperature Scaling
• Feature: Easy To Use
• Warranty: 1 Year
• Accuracy: 100%
• Input Voltage: 230 V
• Condition: New
• Current Output: 100 Ohms

• Brand Name: Siemens
• Warranty: 1 Year
• I Deal In: New Only
• Product / Type: PLC

High and low voltage Busbars can be supplied for all types of industrial applications. Up to 20mm thick and 200mm wide approx Simple or complex configurations Rectangular Bus Bars or round Bus Bars Range of sleeving products Powder coating insulation Copper, Cuponal, Aluminium and Brass Bus Bars Finish : Natural, electro-bright Tin, Nickel and Silver, Any type of Coating As Per Customer Specification

• Size: Multisizes
• Type: Electric Control Panels
• Color: Brown, Grey, White
• Material: Mild Steel, Stainless steel
• Power Source: Electric
• Phase: Double Phase, Single Phase, Three Phase
• Autoamatic Grade: Automatic, Manual, Semi Automatic

Features Thermocouple Extension, Compensating cables Signal cables Control cables Instrumentation Power cables

Our respected firm is widely applauded in the industry for providing a comprehensive collection of Festoon cable

Types Motor Control Center are of three types. 1 Single front with rear access. 2 Single Front without Rear access. 3. Double front with both access. MCC is also designed as Compartmentalized or Non- Compartmentalized stayle. Construction Manshu offers Modular Panels for Motor Control Centre. The modular design has, Frame, Base, Doors, Cover, etc. and all are removable, changeable. 1. Main Body is made from M6h Structure frame: Color: Satin black 2. Base: 75mm Color: Satin black 3. Doors: 1.5mm. Color: Siemens Gary RAL7032 Powder Coated 4. Mounting Plate: 2mm thick, Color: Orange Powder Coated 5. Locks: Four Point lock with handle & key or cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Frame is made of M6h design multi fold construction. This offers very high strength which is required for heavy components like Air Circuit Breaker, Copper Busbars etc. Also, this takes care during short circuit condition against various mechanical distortion forces. Base Base is made of 75mm ISMC channel. Modularity is the main feature of Manshu’s panel. All vertical and horizontal frame members have Punching at 25mm pitch. This gives large flexibility during design, manufacturing and eases modification at site if required. Advantages Panel is very flexible. Expansion is very easy on both sides of Panel and can be expanded at Rear & Top in our factory as well at site. Enclosure Sizes Width of each section is from 300 to 1200mm, Height 2000 or 2300 mm + Base and depth is from 450 to 1600mm. Ingress Protection IP 32 and IP 42 are most suitable for good ventilation, however, IP 54 is also offered. Designing Manshu’s design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility All facilities are available In-house. Type Tests Panels are tested at CPRI and ERDA for 65kA for 1 sec, 50kA for 1 sec, IP 55, IP 56, IP 67. Largest Size Panel Executed 1. Incomer 2500A ACB, 50kA for 1 sec. Length 12000mm. 85 feeders. Double front. 2. Incomer 1600A ACB, 50kA for 1 sec. Length 8000mm. Single Front rear maintenance. 3. Incomer 400A MCCB , 35kA for 1 sec. Length 5000mm. Single Front Dead Back. Maximum Size of Panel We can manufacture any length of panel. However in our factory we can assemble 45000mm panel for testing.

These conventional fire control panels form part of a comprehensive range of conventional and intelligent fire detection equipment. Compatible products include heat and smoke detectors, sounders and manual call points. The M1, 2 and 4 conventional fire control panels provide one, two and four zones (respectively) of fire detection. All panels have been designed to offer high standards of performance, reliability and quantity and comply fully with BS5839, Part 4, 1988. Each panel provides two alarm warning circuits, a power supply and a battery charger. Three state detector condition monitoring enables both open and short circuit conditions to be monitored and indicated at the panel whilst responding to a fire signal at different level. The system can maintain the operation of manual call points after the removal of detectors. The M1 includes an open collector type common fire output whilst the M2 and M4 feature common fire and fault voltage free, changeover contacts. An enabling security key switch prevents unauthorised operation of the panel controls.   FEATURES • Robust, moulded housing and steel back box. • Three state detection with isolate and test facilities on 2 and 4 zone models. • Designed to meet BS5839, Part 4, 1988. • Two fully monitored sounder circuits. • Head removal monitoring with active end of line units included. • Fire and fault relays on 2 and 4 zone models. • Space for 72 hour stand-by batteries. • One cabinet size for all models.   SPECIFICATION mechanical Dimensions (HxWxD): 290 x 350 x 89 mm Weight: 4 Kg (9 lbs) Operating temperature: 0°C to +49°C Humidity: 10% to 93% non-condensing electricalOperating voltage: 230 Vac 50Hz Zone voltage: 17 to 28 Vdc Zone quiescent current: 2.4mA Zone End of Line Device: Active End of Line (supplied) Number of Sounder Circuits: 2 - monitored for open and short circuits. Sounder circuit voltage: 17 to 28 Vdc Max. panel sounder circuit current: Single zone: 300mA Two & four zone: 1A Common Fire Output (remote): M1 - open collector M2 - changeover contact M4 - changeover contact Auxillary input: Class change input Standby batteries: Standby hours: 24 Single zone: 1.2Ah Two zone: 1.9Ah Four zone: 2.8Ah Standby hours: 72 Single zone: 2.8Ah Two zone: 7.0Ah Four zone: 7.0Ah

To allow entry to right people for right purposes, the importance of access control system has gained momentum. The system hands over a card or code to every individual which restricts access to authorized area at authorized times. This system has a programmable panel which is the heart of the system. The reader reads the signal through the card being swiped or shown. This system can be standalone or PC based and also it is for time intime out of time and attendance.

• Material: Mild Steel
• Automation Grade: Automatic
• IP Rating: IP33
• Operation Voltage: 415V
• Surface Finish: Polished
• Mounting Type: Horizontal

By utilizing our years of experience, we bring forth a broad array of Surgeons Control Panel. The offered control panel is widely used in operation theaters in order to get exact control of various functions. Moreover, a team of our quality inspectors perform a series of quality tests on the entire range to flush out any possible defect. To ensure utmost client satisfaction, we manufacture this panel as per the special requirements of our clients. Features : Reliable performance Energy efficiency Compact design

Ideal for testing flame detectors,Wide Spectral Output - UV, Visible, Near IR, Mid-IR,Tests many Flame Sensors Types UV, UVIR, UVIR², IR³, IR², IR,Conforms to NFPA 72 Chapter 14 (14.4.3)Selectable Optical Output Type

The Ultrasonic Level Transmitters, which we deliver, are acclaimed fortheir superior quality. Our organization is renowned as reliable distributor in the industry and based in the well-connected state of Mumbai(India). We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items.

• Phase: 3 Phase
• Voltage: 220-240V
• Frequency: 50-60 Hz
• Features: Excellent Asthetics, Flush Mounted Push Buttons, Built in Overload Relay, Copper & Aluminum cable terminations possible, Wide Band Operating Coil, Wide Relay Range, Silver Contacts for Long Life, Proven Crompton Technology
• Brand: CG Safestart
• Starter Type: DOL

It is the inherent philosophy of RECHNER to ensure that all our products are engineered to excellence and are at par, if not better, than the best in the industry.We also offer a wide variety of off the shelf standard drives and standard drive packages.We can also provide you with spares and replacement parts to keep your equipment running at peak performance.

Cease Fire XT are Supply & Wholesale expertise in domain, offering wide assortment of Fire Alarm Control Panels. These products are suitable for various industries and known for rendering trouble free operations. The offered products are suitable for various applications to meet client's requirements.

We are offering fire control panel. Conventional apollo make fire alarm control panel 2 zone / 4 zone & 8 zone.

• Brand Name: Elcom International
• Material: Thermoplastic
• Usage/Application: Industrial
• Wing Knob With Line: 10 mm
• Cap Size: 21 mm
• Shape: Round

Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a predetermined position when the lever is moved over a projecting member fixed on the girder. The series limit switch is fitted with four sets of contacts which cuts off two phases of the motor in either direction and is suitable for 500 V supply system. The limit switch contacts are automatically reset when the lever returns to zero position due to spring action.  The base and cover have machined surface to protect against dirt and dust. Supplier of Lever limit Switch and manufacturer of Lever Limit Switch. Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer of Lever Limit Switch in India. Pethe Industrial is the leading supplier of Lever Limit Switch in Mumbai, Maharashtra, Gujarat, Delhi, and all over India.     Salient Features • Body material is made of Aluminium / CI casting. • Enclosure is of IP-44 / IP-55 degree of protection. • Mounting position is Vertical. • Cable entry is of ¾” conduit • Rated voltage is 500 V • Thermal test current is 10 Amps • No. of contacts is 2 / 3 / 4 • Mode of operation is 2 way self resetting. • Contact material is of silver cadmium. • Any other specification can be manufactured upon request.             Application   • All Material Handling and Lifting Equipments   • Hoisting : electric wire rope Hoists and Crabs   • Cross travel and Long travel : EOT / Gantry / Goliath / Derrick Cranes   • Winches and Conveyors   • Rolling mills   • Sugar, Mining, Cement, Textile industries to name a few.   • Brake motors

• Material: Copper
• Thickness: 1mm to 60mm
• Electric Grade: ETP Grade
• Surface Treatment: Polished
• I Deal In: New Only
• Width: 5mm to 350mm

Medium density fiberboard is the newest development in the wood panel industry. It is made from wood and other lignocelluloses materials, refined into fibers and reconstituted with a resin binder which is carried out at elevated temperature and pressure, and then sanded to uniform and precise thickness to get best quality plain and prelaminated MDF boards. Our entire range of Medium Density Fibre products conforms to BIS standards and bears the ECO MARK.