Instrumentation Equipment Dealers in Vasai East, Mumbai

• Size: 2mtr, 3mtr, 4mtr, 5mtr
• Material: ABS, Natural Rubber, PVC
• Certification: CE Certified
• Color: Available in Many Colors
• Feature: Boot Loader
• Function: Charging, Data Sync
• Warranty: 1year

As a reliable name, we bring forth durable and high-performance Instrumentation Cables. These cables are suitable where the electrical interference fields can disturb the signal transmission. Instrumentation Cables that we offer are fabricated using high-grade raw materials and hi-tech machines. Our cables help in the transmission of small & large currents, which transmit the signals with external interference reduces to minimum. Moreover, our Instrumentation Cables are available at affordable price with us.

We are offering power panel. All type of busbar ; mcc pcc panels; temperature control panel,apfc panel

• Material: Natural Rubber, PVC, Silicon Rubber
• Color: Black
• Feature: Durable, Flexible
• Brand Name: ALTOCAB
• Temperature Rating: +85ºC
• Inner Material: Copper
• Packaging Type: Bundle

ALTOCAB Instrumentation cable offers total interface free data in measuring, process-control & security systems. Instrumentation process in any industry is a very important factor for controlling various parameters during process. Microprocessor based control devices demand very low noise level & attenuation of signals in the cable. This calls for careful designing & manufacturing of cables with stringent quality control. ALTOCAB never compromise to use the high class of Mylar / Aluminum Tape / Polyester Tape & ATC Drain wire that ensure smooth communication of very Low level signal from transmitter to control room & also effectively cut the cross communication & noise.   Construction   Conductors Annealed bare / uniform coated with Tinned / Silver plated, High conductivity, and Electrolytic Grade Solid / Stranded / Flexible Conductor.   Insulation Conductor are insulated with General Purpose PE / HR / FRLS / LSZH / PVC compound / or any other dielectric material as per customers specification   Colour of Dielectric Cores are identified with different type of color as per requirement as below : As per IS:1554[Pt-I] : 88, 694:90. As per IEC, ITD or number Printing. As per Customer Scheme.   Pair/ Triad / Quad Two / Three / Four cores are uniformly twisted together to form a Pair / Triad / Quad with maximum lay length 80mm as per requirement of customer. The lay shall be so chosen as to minimize cross talk in the cable   Individual Shelding If required, individual shielding may be of poly Aluminum (Thin Layer of Aluminum Foil bonded to Polyester Film) Tape with Annealed Tinned Copper Drain Wire. It prevents the shorting of adjacent shield and minimizes the cross talk and ground loops. A Tinned Copper drain Wire is installed to provide continuous contact with the shield and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and shield.   Laying of Pair / Triad / Quad  Pair / Triad / Quad are laid up with suitable lay. The outer most layers are right hand lay and successive layers are laid up with opposite lay. Then, a Melinex Tape is provided to bind up laid up Pair / Triad / Quad.   Overall Shielding If required, Overall Shielding may be of Annealed Tinned Copper Braiding / Poly Aluminum ( Thin Layer of Aluminum Foil bonded to Polyester Film) Tape with Annealed Tinned Copper Drain Wire. Braiding ATC Shield has high tensile Strength and provides better coverage in flexing application. They are easier to terminate. This provides effective shielding, cross talk and noise are kept to an absolute minimum.   Inner Sheath  The laid up Pair / Triad / Quad after shielding are provided with an inner sheath, which may be Extruded Inner Sheath.   Armouring It is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips.   Outer Sheath It is applied over Armoring in case of Armoured Cable or over inner sheath in case of Unarmoured cable. The Color or Sheath is Black / Blue / Red / Grey. The Sheath material may be General Purpose / HR / FRLS / LSZH PVC compound as per requirement of specification.

A thermostat controls temperature at any point from 50C above ambient 950C. The accuracy of control is + 10C upto a temperature of 600C and + 20C at a higher temperature and is provided with a pilot lamp. The heating element and the thermostat stem are protected by a perforated false bottom. Available in two Sizes : 30.0 x 22.5 x 17.5 cm 45.0 x 30.0 x 17.5 cm Accessories at extra cost: (a) Pyramidal Limited (b) Drop-on-Lid 1. 4 holes of 7.5 cm 2. One hole of 12.5 cm (Central) 3. Double of the above Racks (S.S. Plated)     • Kahn Racks - 40 tubes     • Wassermann Racks - 48 tubes     • Agglutination Rack - 42 tubes

• Material: Plastic, Aluminum
• Shape: Rectengular
• Color: Multicolor
• Bulb Type: LED
• Type: Customized
• Country of Origin: India

• Voltage: 440 V
• Automation Grade: Automatic
• Phase: Three Phase
• Brand: Coatingtech System
• Bus Bar: Copper

• Finishing: Bare Copper
• Insulation Material: PVC
• Cable Conductor: Copper
• Power/Voltage: 220-240V
• Number Of Core: 4

Backed with a team of well-trained professionals, we are capable to manufacture excellent quality Electric Control Panel on large scale. The Electrical Control Panel, we deal in, are precisely engineered in accordance with international quality standards using optimum quality material and sophisticated technology. No denying, we are one of the promising Suppliers, Manufacturers and Exporters of Electrical Control Panel located in Thane, Mumbai. 

• Material: Sheet Moulding Compound
• Usage/Application: Electric panel
• Brand: ARIC INSULATION

The clients can stay assured with us for their transactions, as our payment methods are quite safe and reliable. Available with us in several grades and specifications, our products stand high on the counts of quality.Features : Durable nature Longer working life Top performance Easy to install Low maintenance Rugged structure

• Brand Name: PIONEER ELECTRICAL WORKS
• Certification: ISO 9001:2008
• Color: IS 631 OR RAL7032 OR as require
• Voltage: up to 11 KV
• Warranty: 18 months
• Place of Origin: INDIA
• Rotor Voltage: up to 5000V
• Rotor Current: Any
• Stator Voltage/Current: Any
• No. of Starts: As Required

• Material: Stainless Steel
• Brand Name: JM Graphite
• Usage/Application: Industrial
• Surface Finish: Polishing

• Suitable for OEM Applications • 0 to 100% RH (Operating Temperature : -20 to 85°C) • Fully Calibrated for Precise Humidity Measurement • Very Low Drift Due to Wide Sensor Area • SS Removable Filter • Low Temperature Dependency

• Max. Voltage: 220 VAC
• Packaging Type: Plastic Packet
• Country of Origin: India
• Rust Proof: Yes
• Usage: General
• Specialities: Rust Proof, High Quality

Description: Suni Lever Limit Switch is used for heavy duty E.O.T. Cranes, Wagon shunting devices etc., to prevent over travelling or over traversing on power and control circuit up to 500 volts A.C. 50 cycles / second and 40 amps current rating. We are counted among the ecstatic Lever Operated Limit Switch Manufacturers in India. Suni makes Lever type Limit Switch normally remains closed and cuts off power to stop the motor of the particulars motion. Suni Make lever Limit switch operates when its lever reaches its pre-determined position and the lever is moved over a projecting member fixed on the Girder. The Limit Switch contacts are automatically reset when the lever returns to zero position due to spring action. The Lever Limit Switch is made in IP-54 enclosure. In case of IP-54, the cover is of Cast Aluminum. Also in this case the base and cover have machined surface to protect the Limit Switch against dust. The cam shaft on which the cams are fitted is mounted in the housing on moulded bushes of synthetic material which are fixed to the front and rear walls by means of screws. The Cams which are fitted on the cam shaft are moulded from the highest quality synthetic material and are accurately cut to correspond to the switching sequence desired. The contacts have a maximum continuous Current capacity of 40 amps AC. The contact tips are made of high grade Silver Cadmium Oxide alloy. When used for Series operation [up to 40 Amps maximum], the Contacts are suitable for 720 operations per hour and in case of Shunt operation [for Control Circuit], the Contacts are suitable for 1000 operation per hour. The same Contacts can be used in Series as well as in Shunt configurations The switching capacity of the Contacts when used for Shunt operation is 15 amps at 400 Volts, AC on highly inductive load and 2.5 amps at 220 Volts DC. These switching capacities in fact are far in excess of what is actually required in practice and hence replacement of Contacts for Shunt may not be necessary for a long time. The body of the Contacts is made of high grade Melamine which is specifically suited for heavy duty operation .The material is non tracking and is capable of with standing heavy arcing.

• Phase: Three Phase
• Material: Stainless steel
• Frequency Range: 50-60 Hz
• Voltage: 220-380 V
• IP Rating: IP40
• Sheet Thickness: 1-10 mm
• Rated Current: 630A-1000A

• Type: Flameproof Temperature Sensor
• Certification: CE Certified
• Application: Temperature Scaling
• Color: Available in Many Colors
• Voltage: 0-15VDC
• Frequency: 50Hz
• Power: 0-5W

Precise designs, easy to install and rust free are the attributes that can best define our Thermocouples & RTD Sensors. Our whole lot of Thermocouples and RTD Sensors are treasured by the buyers owing to their excellent quality and smooth operations. The tube light fixtures are water resistant. We are a credible Manufacturer and Supplier of Flameproof Head Thermocouples & RTD Sensors from Maharashtra, India.

This is a new Technology of Servo Driven press feeding system using Servo Motors to control the feeding pitch. It is time to replace your fast wearing Air Feeder with new Servo Roll Feeds. The Servo Roll Feeder have reduction in maintenance and minimum down time compared to Air Feeder.

Made in india with 1 year warranty

• wheel box shaft: 100.00
• shackle SS: 150.00
• pin ,bush: 10.00
• knurling pin: 15.00

wheel box shaft used in wiper motors. shackle , key bush pin

• Color: Black
• Material: Rubber
• Packaging Type: Polybag
• Brand: Hi-Tech
• Features: Technically superior,Industry-leading technology,Competitive prices,Durable

• Input: Pt - 100 / 3 Wire
•  Operation: True Two - Wire Operation
•  Supply: 10
•  Size: 22 x 74 x 100 mm. / 72 x 110 x 80 mm
•  Accuracy: ± 0.2% F.S. linearised

• Weight: 100-1000kg
• Voltage: 220V, 380V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Usage: Pure Water Process

Key Attributes: Optimal power utilization   Highly durable and require minimal maintenance Require less floor space for installation Drinking Water Plants The Packaged Drinking Water Plants we offer are made with modish technology aid, which match up with the specified water purification needs. Upcoming with precocious purification process, the structural activities of these drinking water plants ensure best functional assistance. Efficient in gaining purified water as per approved norms these products are appreciated for their high efficiency in operations as well as the less maintenance. Supporting and handling many-sided purification processes relating capping rinsing, filling, water sterilization the products also use oxidants and filtration methods Features: Wide scope of ECO series Packaged Drinking Water Plants/Bottled Mineral Water Plants. The plants falling in conformity with BIS programs. The treatment plants are idealistically appropriate for their usages in processing of bottled mineral water, packaged drinking water, carbonated & non-carbonated soft drinks, beverages and juices, and other kindred processes. Specifications: Accessible in antithetic functional capabilities that range from 500 LPH to 100,000 PH This capacity can also be custom-made as requested by the customers. The products make the use of stainless steel 304 piping support and FRP vessels. Also available with skid stipulation as an elective choice. Bigger capacity plants featuring use of mild steel vessels. Come with internal and external coatings with food grade epoxy so as to give an optimal service life. SS 316 finish is furnished for Filters , Micron Bag UV systems and Cartridge Filters Applications: These plants are widely used for packaged drinking water in various capacities

We are proud to introduce ourselves as the most well known manufacturer and supplier in PVC Cable Gland Shrouds in India. Our PVC Cable Gland Shrouds are highly durable, flexible and reusable electrical insulating covers, which are used for the cable gland connections. Manufactured from high quality of the polyvinyl chloride material, with the thickness of 2 mm, our PVC Cable Gland Shrouds are formulated specially for the electrical application at the high voltages. It can be easily installed, removed and is replaced within few minutes. Properties : DurableCorrosion resistantUseful in high voltagesEasily installedFlexible Reusable Available in following sizes : BW Cable GlandCW Cable GlandCCG Cable Gland Applicable in : Cable gland connectionsElectronic Items

• Size: 1 ½”to 12”

Off centered disc ensures a progressive smooth and low friction seat – disc closing, MHardened sealing surface to provide high level of tightness and long life time., The unique sealing system combines with the eccentric disc rotation and the patented metallic seat provides and exceptional sealing even with high temperature fluctuations.

Insutech offers complete Conventional DSL System which generally comprises of Indian Standard Angle (ISA) or Rails, Brackets, Current Collectors Assemblies, Copper Expansion Compensator, Power Feed Clamp, Control Clamp. The conventional assembly is ideally suited when the current ratings are beyond 400Amps under normal operation and shall be suited for lower ratings where the environment is dusty. Brackets are welded to the web of the girder at 2.0m intervals. When the brackets have been fitted, the four conductor rails (three phases and earth) are assembled with proper alignment of all the four conductors. The Current Collector are mounted onto the Crane, which is in contact with the Conductor Rail and thus provides power to all the Panels of the Crane. Insutech Conventional DSL Systems is ideally suited for Steel Plants, Smelters, Power Plants outdoor operating conditions.