Insulating Gaskets Dealers in Andheri East, Mumbai

• Material: Metal
• Shape: Customised
• Color: Metalic
• Pattern: Plain
• Packaging Type: Cardboard Box
• Appearance: Antique
• Feature: Attractive Look, Fine Finished

Metal Jacketed Gaskets find their application in  HIGH PRESSURE and HIGH TEMPERATURE conditions. Its structure is easily compressible with tightening loads lower than those required for solid metallic gaskets.Applications : Sealing of heat exchangers Valve cover Autoclaves manhole Availability : Single Jacketed Double Jacketed Corrugated Jacketed Sheet Metal Options : SoftIron AISI 304/316/321 Copper Brass FILLER Available In : Asbestos / Non Asbestos CAF PTFE FLEXIBLE GRAPHITE CERAMIC

Spur Corporation has been supplying Jacketed gaskets to top corporations all over the country.Jacketed gaskets combine the superior temperature resistance of a metal jacket with the sealing performance of a filler material. The filler material is fully enclosed by a two-piece metal jacket, which covers both inside and outside diameters of the jacket and the contact surfaces on both sides. Such gaskets are designed for high temperatures such as Fahrenheit, that is encountered in heat exchangers,boilers and similar type of applications.Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be seale.We have adequate capacity to produce any shape and size with many compartmental ribs made out of different materials.They can be used for heat transfer equipment, condensers ,coolers,joints etc. We fabricate jacketed gaskets from any metal in any thickness customised to the requirement to provide compressive strength and blow out resistance, depending on the application’s corrosive conditions. For excellent compressibility and resilience, our filler materials for jacketed gaskets include flexible graphite ,non-asbestos, ceramic, PTFE and corrugated metal. Jacketed Metal are available in following varieties : SINGLE JACKETED GASKET: This type of gasket is widely used in engineering applications and air tool applications where space is limited, relatively low compressive forces are available for seating the gasket and gasket seating surfaces are narrow.The majority of applications for single-jacketed gaskets are normally 1/4" or less in radial width. DOUBLE JACKETED GASKETS: The application of the Double-jacketed gaskets lies in heat exchanger applications and are the most commonly used style of gaskets. Any material that is commercially available in 26-gauge sheet, and where the service is not critical, this type of gasket are available. Another application of the same lies in standard flanges. SINGLE - JACKETED OVERLAP: Where maximum flange width is approximately 1/4", single-jacketed overlap construction gasket is used. This finds application when the flange width makes it impractical to use a double-jacketed gasket and total enclosure of the soft filler material is required. DOUBLE JACKETED, CORRUGATED GASKET: The double-jacketed corrugated gasket is an improvement on a plain jacketed gasket in the sense that it will provide an additional labyrinth seal in the corrugations on the gasket. A double-jacketed corrugated gasket still relies on the primary seal on the inner lap. It also provides the advantage of reducing the contact area of the gasket, enhancing its compressive characteristics. ONE PIECE, TWO PIECE, THREE PIECE ONE SIDE OPEN, French type gasket: French type gaskets finds application in a one-piece jacketed construction for narrow radial widths not exceeding 1/4" and in two- and three-piece constructions for wider applications. The most commony used French type gaskets are fabricated using copper sheath. When the application requires the outer edge of the gasket to be exposed to fluid pressure,this type of gasket can also be used with the jacket on the external edge of the gasket.

nsulation Kit Gaskets are designed to combat the effects of corrosion often found in flanged pipe system. Galvanic corrosion between dissimilar metal flanges, flange insulation associated with cathodic protection of underground piping are other examples where insulating Kit Gasket can be put to effective use. The Design and selection of materials used in Flange Insulation Kit Gasket, meet the twin purpose of sealing the flanges and insulating metal parts to prevent flow currents responsible for corrosion. INSULATION KIT GASKET We design, manufacture & supply Flange Insulating Kit Gasket in three types: TYPE-E for full face flanges TYPE-F for raised face flanges TYPE-D gaskets specifically designed to fit into the grooves of RTJ Flanges Flange Insulation Kit Gasket will comprise of:For Type "E" and type "F" One central gasket of suitable thickness in flat section One full length insulating sleeve per bolt / Integral Washer Sleeve Two insulating washers per bolt Two electro plated metallic washers Insulation Gaskets for Type "F" Raised Face Flanges   Available for use in ANSI B16.5, API, BS & DIN Standard. In this type, the central gasket is designed to be located inside the flange bolt circle and sits fully on the raised face portion of the flange. This type of gaskets will be supplied in all the materials as shown in "Materials Used " Table below. Insulation Gaskets Type "E" for Full Face Flanges In this type, the central gasket has its outside diameter as equal to that of flange outside diameter and precision cut bolt holes. This design helps easy alignment of the gaskets during installation. Type "E" gaskets are available in Neoprene faced reinforced phenolic material or other materials as shown in "Materials Used " Table below. Insulation Gaskets Type "D" for Ring Gaskets AvailaAvailable for use in ANSI B16.5, API, BS & DIN Standard In this type the gaskets available in fabric reinforced Phenolic. Available in basic "oval & octagonal" type. This type has the contact faces with oval shape. It provides a high reliability seal. These gaskets comply with ASME B - 16.20.

We are a Leading Manufacturer and Exporter of High-grade Metal Jacketed Gaskets. These Metal Jacketed Gaskets Finds Their Application in Conditions Where the Presence of Pressure and Temperature is Very High. Its Structure is Easily Compressible with Tightening Loads Lower Than Those Required for Metallic Gaskets. the Clients Can Avail These Metal Jacketed Gaskets in Different Specifications According to Their Needs.

Insulating sets are essentially used for pipeline flange corrosion protection, where a seal is required between dissimilar flange materials. The use of dissimilar metallic flanges with a conductive gasket material accompanied with a suitable electrolyte may set up a galvanic cell which will corrode the anodic metal. Insulating sets are also used to electrically isolate flange joints, preventing the flow of electrostatic charge along pipelines. There are three standard Types of insulating sets available to suit raised face, flat face, and ring grooved flanges, as illustrated below. FLIPS India Engineering Insulation Gaskets For Type "F" Raised Face FlangesIn this type, the central gasket is designed to be located inside the flange bolt circle and sits fully on the raised face porting of the flange. This type of gaskets will be supplied in all the materials shown in Table FLIPS India Engineering Insulation Gaskets For Type "E" For Full Face FlangesIn this type, the central gasket has its outside diameter as equal to that of flange outside diameter and precision cut bolt holes. This design helps easy alignment of the gaskets during installation. Type "E" gaskets are available in Neoprene faced reinforced phenolic material or other materials in Table. FLIPS India Engineering Insulation Gaskets For Type "D" For Ring Joint GasketsIn this type the gaskets available in fabric reinforced Phenolic. Available in basic "Oval & Octagonal" type. This type has the contact faces with oval shape. It provides a high reliability seal. These gaskets comply with ASME B - 16.20.

metal jacketed gasket, industrial gasket, Spiral Wound Gasket