Insulating Sleeve Dealers in Mumbai

• Pre-Insulated Sleeves: Pre Insulated Sleeves

We manufacture and export pre-insulated sleeve. Our range of cable lugs and terminal ends also includes pre-insulated sleeve. These are made of aluminium copper.

• Material: Fiberglass
• Thickness: 1 inch-1.5 inch
• Voltage: 10 - 15 kV
• Temperature Range: -30 - 200 degree C
• Packaging Type: Box

• Type: Flexible
• Shape: Round
• Material: PVC
• Country of Origin: Made in India
• Color: White
• Size: 20 mm
• Temperature: 90 Degree C
• Shrinkage: 30%

The term Heat Shrinkable is applied to extruded or moulded polymeric materials, which are cross linked either by irradiation, or by chemical means, such that when their temperature is raised beyond the normal base polymer crystalline melting point, they do not melt but merely become rubbery. In this state, if the material is then mechanically expanded and held in this position until the temperature falls below the crystalline melting point. It remains in the expanded state. Subsequent heating in an unconstraint state will then result in the material recovering or shrinking to its original extruded or moulded size and shape" The Electricity Association. To maintain the continuity of the underground cables the need for the reliable jointing systems came into existence. Cable terminations and joints have always been very critical part in the whole distribution system involving underground cables and have often been the causes of failure in the distribution system as well. There has always been a need to improve the reliability of the underground distribution system through newer materials that can withstand stringent operating conditions and installed without a room for errors. We are dealers of Steinel Heat tools & Heat Guns suitable for Heat Shrinkable Cable Accessories, Heat shrink Power cable Accessories, Heat Shrinkable Cable Jointing System, Heat Shrink Accessories etc. There are wide range of cable jointing systems available today, which can be classified by the way they are applied such as taped type, pre-moulded / push-on / slip-on type, cold application type and heat shrinkable type. The selection criterion for an appropriate type of cable jointing system by the user should be dependent on the site conditions, operating parameters, voltage applications and cable types. Steinel offers the HL 1400 S Hot Air Gun and a variety of hand held hot air blowers used for the shrinking of busbar and switchgear sleeves.

• Material: Silicone and Polyurethane
• Country of Origin: Made in India
• Thickness: 0.25 to 1.40 mm
• Color: Red, Green,Blue,White,Yellow
• Usage/Application: Electrical Insulation
• Brand: Harnawa.Inc

• Material: PVC
• Thickness: 7 mm
• Color: Multi Color
• Usage/Application: Industrial
• Temperature Resistant: 125 deg C

Raychem RPG develops, manufactures and markets products and systems for the electrical power industry. Our products are extensively employed by power utilities and equipment manufacturers, in rail transport systems and in industry around the world. Raychem RPG produces high voltage insulating products, cable accessories and protection systems for electrical supply companies and utilities, original equipment manufacturers and major industrial companies. Safety and reliability of high voltage equipment is vital and Raychem RPG is committed to improving performance for our customers at all levels. Our development teams work to create a superior range of high performance products and technologies for high voltage applications. Raysulate - Raychem’s insulation enhancement range of products have unmatched field performance within the industry.

• Tensile Strength: 10 N/mm2 (Mpa) (min.)
• sizes: 16 to 800 sq.mm.

Insulcover is a Medium Voltage Wrap Around Overhead Line Cover that provides retrofit insulation for overhead conductors to help prevent electrical outages caused by trees or wildlife coming into the contact with distribution lines.It is manufactured from high quality Non Tracking Polyolefin material.IInsulcover is designed to insulate existing bare lines without costly conductor replacement expenditure or additional line hardware. Insulcover may be applied selectively on problem spans when temperatures are above 0oC.

we offer Insulating Sleeves. * Fiber Glass Silicone Resin (1.5 KV - 250°C) UL Approved * Silicone Rubber Coated on Fiber Glass (4 KV - 180°C) * Silicone Rubber Sleeves * Fiber Glass B & F Class Sleeves   Fiber Glass Silicone Resin (1.5 KV – 250°C) UL Approved Silicone Rubber Coated on Fiber Glass (4 KV – 180°C) Silicone Rubber Sleeves Fiber Glass B & F Class Sleeves China Sleeves - PVC coated Fiber Glass Sleeves PVC & Empires Sleeves Imported POLYOLEFIN Heat Shrinkable Sleeves (Flame Retardant 125°C & UL Approved) PVC Flexible pipe, Spiral Tubes etc.

• Type: Refractory Material
• Thermal Conductivity: 0.2W/M.K(1000 degree c)
• Usage: Exterior Tiles,Interior Tiles,Industry Insulation
• Refractoriness: 300-450 degree C

We are one of the most prominent manufacturers and suppliers of insulation sleeves in india. the insulation sleeves, we provide, are of optimum quality since they are made of the most fine quality raw materials obtained from the most trusted vendors. The raw material comprises of pvc, which provides the extra insulation, which helps in the protection of the wire. It is extensively used in wire harness, cable and battery industry. It is manufactured in accordance of requisite norms and standards and is delivered within stipulated time frame. Properties : durablemade of optimum quality raw materialstransparentuseful for protection of wireshock proof applicable in : wire harnesscablebattery industry

• Material: Silicone
• Color: Red
• Usage/Application: cables
• Packaging Type: box
• Thickness: 1-2mm

Our rich experience has enabled us to manufacture a comprehensive range of End Sleeves. Available in standard model, these products are provided with insulating sleeve. Furthermore, manufactured with the use of quality tested raw material, the surface of these products are tin plated. These products are appreciated in the market for their high tensile strength, durable finishing and anti-corrosive properties

Overhead line insulation sleeve high voltage insulating products, cable accessories and protection systems for electrical supply companies and utilities, original equipment manufacturers and major industrial companies.

Material - Aluminum alloy Features - Pre- Insulated Sleeve are designed for jointing insulated cables (include ABC cables).  The sleeve is with full tension. The waterproof end cap can prevent water into the barrel.  It is coloured differently to distinguish the cable sizes. It is marked with type, cable size, die size, inner cable length and number of crimping.

• Thickness: 1mm and upto 50 mm
• Length:: 1 mtr or continuous length

Electrical Sleevings (Fibreglass / Silicon) Fibreglass sleeving are made up of closely braided E-type fibre glass yarn having superior mechanical and electrical strength with low alkali content .They are varnished or coated according to the insulation class required. Thermal stability upto 350° C can be obtained .Fibre glass sleevings have wide applications in insulation for motors, wire insulation, fans and all major electrical and electronic applications. Wide variety of Fibreglass sleevings are available such as E-class fibreglass sleeving (polyvinyl chloride resin coated) F-class fibreglass sleeving (varnish coated) H-class fibreglass sleeving (silicone coated)

insulating sleeves, Exothermic Sleeves, Foundry Chemicals, hot tops

insulating sleeves, Exothermic Sleeves, foundry coatings, Colorwood Primer

• f class insulating sleeve: diffrent colours.

We manufacture f class fiberglass insulation sleeve of 1to 12 m.m. Diameter which can with stand high temperature as well as high voltage.

Insulating Sleeve, Aluminum Silica Tape, Round Bellow, PTFE Packing

electrical sleevings, brass electrical lamp holder, wiring