Insulation Blankets Dealers in Mumbai

These blankets are made out of specially blended non-woven fabrics which is a very effective solution to heat blocking and acts as a fantastic fire barrier material & has very high temperature resistance during welding, and has High resistance to chemicals & solvents. Can withstand temperatures up to 1500oC & in excess at times.   APPLICATION Fire Blankets are generally used by welders for covering the area used while welding and in case of emergencies for extinguishing fire. Also used in households to extinguish small kitchen fires. INDUSTRIES  Welding Household Petrochemicals Steel Foundries, Glass, Ceramics, Other Plants where there are possibilities of hazards.

• Roll Size (mm): 1220 x 40000

The FiberfraxCeramic Fibre Paper are manufactured using our proprietary technology and offer exceptional insulating performance and flexibility.Advance production techniques ensure a highly uniform structure characterized by low thermal conductivity, good handling strength and a smooth surface.

• Brand Name: REX

We are offering ceramic fiber blanket. ceramic fiber blanket is a refractory fibre needled mat made without binder from refractory ceramic fibres and provides an effective solution to a wide range of thermal management problems. These blankets offer superior insulating performance, flexibility and resilience. ceramic fiber blankets are unaffected by most chemicals for the exception of hydrofluoric & phosphoric acids and concentrated alkalies. in case of wetting by water, the thermal and physical properties are retained after drying. salient features: 1. high tensile strength 2. low shrinkage 3. excellent hot strength 4. high resiliency 5. low thermal conductivity 6. resistance to thermal shock 7. good sound absorption 8. high heat reflectance classification temperature 1.shrinkage on heating 1260°c= 1000°c x 24h ≤ 3 1427°c= 1350°c x 24h ≤ 3 2.thermal coductivity (128kg/m) mean temperature: 500°c 1260°c= ≤ 0.153 1427°c= ≤ 0.153 3.density (kg/m) 1260°c= 64/96/128/160 1427°c= 64/96/128/160 4.tensile strength (mpa) 1260°c= 0.06 1427°c= 0.06

Fire Blankets are available in two types; Aluminised Fire Blanket It is made of Imported Dual mirror "GENTEX"Brand Aluminised Glass fibre fabric which is approved by Centre For Environment and Explosive Safety (CFEES) "Ministry of Defence" Govt. of India " New Delhi formerly known as DIFR, with eyelets on four corners . • Size:- 56"X 76" Fibre Glass Blanket • Made of fibre glass fabric of 0.4 mm thick fabric. • Made of fibre glass fabric of 1mm thick fabric

• Country of Origin: India
• Size: Any size and dimension
• Type: Welding Blanket
• Material: Fiber
• Application: Industrial
• Color: Black
• Feature: Anti Bacterial, Anti-Wrinkle, Comfortable, Fire Resistance
• Technics: Machinemade
• Pattern: Plain
• Yarn Type: Nonwoven

• Type: Glass Wool Blanket
• Country of Origin: India
• Brand Name: Twiga Insul
• Density: 10kg/m3 to 48kg/m3
• Certificate: ISO 9001
• Brand Name: Twiga Insul

Fiber glass wool are hydrocarbon base systems (oil or pit carbon derivates) mixed with mineral fillers and reinforced with Twiga Fibreglass Mat

• Surface Treatment: Finished

Our Fibre Glass Graphited Coated Blanket/ Fabric is made from heat and fire resistance material like Fibre Glass Graphite . The fire resistant blanket are used to prevent high heat & molten metal splashes in areas such as furnace, boiler and welding applications.   Features: Manufactured from heat and fire resistance fabric like Fibre Glass Graphite having thickness of 2.2mm Fire curtains used to prevent heat & heavy metal molten splashes in hot region such as furnace, boiler etc. It protects human lives, precious capital goods and other valuable items from fire. Flexible / Movable curtains is very ideal for its use at the time of welding process.

• Size: 2 Mtr X 2 Mtr
• Material: Fiberglass
• Thickness: 2.2 Mm
• Model No: NSS-SB-1311
• Product Category: Fire & Safety Blankets
• Fabric: Graphite Coated
• Use/Application:  It protects human lives, precious capital goods and other valuable items from welding. Fire curtains used to prevent heat & heavy metal molton splashes in hot region such as furnace, boiler etc.

Ceramic Fibre Blankets are available in roll form in a wide Variety of densities and thicknesses. All Ceramic Fibre Blankets are made from long refractory fibres, binder free and are needled. They have excellent strength before and after heating. All blankets have excellent chemical resistance unaffected by all chemicals except hydrofluoric acids and strong alkalies. Moreover, we are counted amongst the reliable Ceramic Fiber Insulation Blankets Manufacturers and Suppliers in India. Features Excellent insulating performance Excellent thermal stability Low heat storage Resistance to thermal shock Good sound absorption Unaffected by most chemicals except hydrofluoric and phosphoric acids and strong alkaliesApplications Furnace & kiln linings Boiler insulations Reformer & heater lining Coke oven hot repair Expansion gap Duct and Pipe linings Thermal barriers for automotive industry Die cut shapes for automobiles Steam and Gas turbines insulationAvailability Standard Sizes : 610 mm width X 7300 mm length 610 mm width X 3650 mm length for 38 & 50 mm thick 1220 mm width X 7300 mm length 610 mm width X 14640 mm length for 6 & 12 mm thickType : Refractory fibre Blankets Classification temperature STD Blanket : 1260° C AZS Blanket : 1425° C Cerablanket : 1260° C Cerachem Blanket : 1425° C The Maximum use temperature depends on the application. In case of doubt, refer to MMTCL Technical service for advice. Description Refractory blankets are available in roll form in a wide Variety of densities and thicknesses. All blankets are made from long refractory fibres, binder free and are needled. They have excellent strength before and after heating. All blankets have excellent chemical resistance unaffected by all chemicals except hydrofluoric acids and strong alkalies.

Supercera Blanket is a refractory fibre needled mat made without binder from Supercera fibres the only super-spun double needled fibre in the country today. Supercera RTZ and HTZ Blankets are zirconoca stabilized and are suitable or use upto 1260°c and 1425°c respectively.

• Color: White
• Material: Ceramic
• Thickness: 4-5 mm
• Packaging Type: Roll
• Temperature: 1260 - 1500 dec C
• Features: Reliability, Easy to avail, Optimum quality .

These blankets are made out of asbestos-free fiberglass fabric. They come in different thickness depending on the nature of work. a) 0.4mm Approx. - Mostly used as Fire blankets b) 0.8mm Approx. - Mostly used for Welding purposes (Can withstand temperature up to 1000 ° C )

• Material: 100% Fibre
• Size: 1mtr x 2 mtr
• Max Withstanding Temperature: 500 degree C
• Fabric Weight: 180 grams
• Colour: White
• Product Type: Blankets

Supercera Blanket is a refractory fibre needled mat made without binder from Supercera fibres the only super-spun double needled fibre in the country today. Supercera RTZ and HTZ Blankets are zirconoca stabilized and are suitable or use upto 1260°c and 1425°c respectively.Both blankets have excellent resistance to most chemicals. If wet by oil or water, thermal and physical properties are fully restored upon drying. Low Shrinkage at elevated temperature - due to their excellent Thermal Stability. Low Heat Storage Both blanket store approximately 95% less heat than dense firebrick and approximately 75% less heat than insulating firebrick a property of significant importance in the operation of periodic kilns furnaces. Good Cold strength. Excellent Hot strength. Thermal stock Resistance due to the flexible matrix of Supercera, extreme temperature change do not alter its ability to physically stay in place and perform at higher levels. The products are not wetted by molten non-ferrous metals. If wet by oil, water or steam, Thermal and physical properties will be fully resorted after burn out or drying.

We are offering ceramic fibre paper.features high flexibility good resistance to tearing precise thickness resistance to thermal shock very low thermal conductivity description ceramic firber papers are manufactured from high purity refractory fibres and designed for high temperature insulation. Advanced production techniques ensure uniform fibre distribution and close control of thickness and density. papers are being produced from alumina silicate fibres with minimum addition of carefully selected bonds, which burn out cleanly in service. all grades of blok 607 receive a water repellence treatment to prevent absorption of water or concrete binders. the panels must be installed so that the side with the product name is in contact with the concrete. When tested on this side, blok 607 is classified as non hydrophilic (nf p 75-305). thicknesses over 50mm are obtained by bonding together two thinner sheets.

We are counted among the top Manufacturers, Exporters and Suppliers of Ceramic Fiber Paper. In order to ensure its quality, we manufacture paper using quality approved ceramic material. Our well-equipped production unit has enabled us to produce Ceramic Fiber Paper in bulk at a time. One can place retail as well as bulk orders for Ceramic Fiber Paper with us.   Definition :Fiber papers are not entirely made from wood pulp, but include some characteristic plant fiber that gives them their character. Ceramic fiber paper is a product used in asbestos replacement. Ceramic fiber paper can withstand temperatures of over 2,012ÂO F and can also be called as Alumina-Silica Ceramic Fiber Paper.   Synonyms of product : Ceramic fiber Board Alumina-Silica Description :We are the leading manufacturers of Ceramic Fiber Paper, which is an aluminosilicate ceramic fiber-based non-woven fabric. It is manufactured through a special paper-making process with high purity washed fibers. Our advanced production technology makes the fiber distribution very even, paper thickness and unit weight is also under strict control.Ceramic fiber paper consists primarily of high purity aluminosilicate fiber and is made through a fiber washing process. This process controls the content of unfiberized shots to a very minimal level within the paper. InterSource ceramic fiber paper features light weight, structure uniformity and low thermal conductivity, which serve as a perfect solution for high temperature insulation, chemical corrosion resistance, and thermal shock resistance. ceramic fiber paper can be used in various types of refractory and sealing applications.Ceramic Fiber Paper is used to solve a wide variety of heat-related problems. These papers exhibit excellent chemical stability, resisting attack from most corrosive agents. The differentiation of this paper is done by thickness, density, fiber index, and chemistry. These papers are tested to a wide variety of industry standards to ensure quality.

Type PGE® Brand of Welding Blankets are made from Ceramic Vermiculate Cloth (Brown) Temperature : 1020 Deg C   Description Ceramic Cloth with vermiculate slurry coated and further reinforced for added strength. We can customize the same by adding brass eyelets, kevlar stiching, and usage as curtains or flat blankets Material   We are the reputed manufacturer and exporter of an extensive array of Vermiculite Coated Fabric. Provided fabric is highly demanded in industries for die welding, welding blankets and general purpose insulation. Manufactured by our experts using the finest quality basic material in line with latest industry standards, this fabric is coated with vermiculite. In order to ensure its quality and durability, the offered fabric is tested on various quality parameters. This Vermiculite Coated Fabric is available in various lengths and thickness at very reasonable rates.Features:Temperature resistanceOptimum strengthFine finishDurability

Our product range includes a wide range of insulation blankets and vermiculite ceremic fiber cloth. Insulation Blankets. Category: Blanket Description Specification : The temperature resistance of these welding blankets is up to 550 D.C to 1100 D.C. Available in 0.6 mm to 3 mm desired thickness and is made stitched using kevlar thread. Available with loops eyelets, this range is best suited for protecting the machines where heavy welding is done. Welding Blankets are manufactured with fiber glass ceramic fiber glass with different coating like graphite, Mica, silicon PTFE. These products are available in sizes such as 1 m x 2 m, 2 m X 2 m and can be customized as per client requirement of clients.

• Density: 64 kg/m3
• Size: 7300 X 610 X 25 mm
• Max Withstanding Temperature: 1260 Degree C
• Thickness: 13 mm
• Material: Ceramic
• Color: White
• Features: Eco-Friendly, Non-Allergenic
• Packaging Type: Roll

• Material: E-Glass Fiber fabric
• Type: Fire Blanket
• Temperature Resistance: 550 degree C
• Weight: 350 - 1600 GSM
• Width: 1000 - 1500 mm
• Heat Resistant: 650 degree C
• Fabric Quality: 430 g/sqm
• Features: Blanket fiberglass wool insulation is light in weight, Flexible and resilient

• Thickness: >50mm
• Size: 25mm and 50mm
• Insulated In: Furnace
• Packaging Type: cardboard
• Usage/Application: Insulation
• Brand: Orient and Shreecare

Ceramic Fiber Cloth contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Ceramic Cloth is a woven fabric made from our high quality alumina silica fiber and especially mechanically needled for increased tensile strength and surface integrity in form of ceramic fiber yarn. It can be used for high temperature applications up to 2300 F. The cloth is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Typical applications of ceramic fiber cloth include :• Expansion joints• Safety blankets• Curtains• Welding blankets• Protective and insulating covers• Shields, gaskets, cable or pipe wrapping, etc. It has been widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, shipyards, refineries, power plants and chemical plants. Recommended Working. Available sizes: 1.5MM, 2MM, 3MM, 6mmWidth: 40"

We manufacture fire and welding blankets of superior quality. Workers while carrying out welding operations heat treating , grinding always face safety problems. Our fire and welding blankets provide full protection to them. They are made up of asbestos free material.

• Density: 64 kg/m3
• Color: White
• Thickness: 50 mm
• Size: 10 m (Length)
• Material: Ceramic Fiber
• Country of Origin: Made in India
• Fiber Shrinkage: Less than 3.5%
• Temperature: 1260 to 1400 Degree Celsius
• Insulated In: Tank
• Packaging Type: Roll
• Usage/Application: Metal Industry

• Color: White
• Material: Ceramic
• Size: 7200 mm Length x 610 mm Width
• Pattern: Plain
• I deal in: New Only
• Density: 64 kg/m3
• Thickness: 25 mm
• Max Withstanding Temperature: 1260 Degree C

• Features: Sturdy, High performance, Competitive prices

• Size: 1m x 2m
• Material: Aluminized cloth
• Color: Silver

• Country of Origin: Made in India
• Color: WHITE
• Usage/Application: HIGH TEMPRATURE INSULATION BLANKET
• Thickness: 25 TO 50MM
• Brand: MMTCL,UNIFRAX,LLOYDS,ORS,DGN
• Max Withstanding Temperature: 1260 Degreec