Jain Irrigation Systems Ltd. Fort, Mumbai, Maharashtra

Features and Specifications Manufactured from high quality Poly Vinyl material. Lightweight yet tough and abrasion resistant. Flexible tubing, conforms to any contour. Smooth inner surface prevents scaling and reduces frictional looses. Handles a wide variety of chemicals, gases, and liquids. Each batch passes through stringent quality test. Applications Used as an extension tube in micro irrigationsystem. Used with turbo stake dripper. Used with "Rainport™" Sprinkler assembly.

Features and Specifications Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided Various Option Available Venturies are available from ¾", 1", 1¼", 1½", 2" Made of engineering plastic. Excellent chemical resistance to most of the chemicals. Highly efficient and compact differential pressure injection device. Economical and low cost option Available in ¾", 1", 1¼", 1½" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.

Rugged reinforced plastic construction. Protects valves from damage due to lawn mowers, other garden equipments and vandalism. Provides convenient access to valves installed below ground level. Robust top cover with non slippery grips. Leaf green colour of the cover matches to surrounding lawn/turf. Heavy duty extended bottom keeps the valve box stable and firmly set in the soil. Special heavy duty model available. Available in circular and rectangular models.

Manufactured from high quality PVC compound. Excellent corrosion and chemical resistance to most acidic and alkaline solutions. Light weight. Easy to handle and transport. Excellent flow characteristics. Smooth inner wall minimizes frictional losses and scaling due to precipitation. Available as per IS-4985, DIN-8062 and ISO-1452-2. Also manufactured to BS-3505/3506, ASTM D1785-84 and ASTM D 2241 on demand. Available in sizes from 20 mm (½”) to 560 mm (20”) as per above standards. Commonly supplied in 6 m lengths with plain ends or socketed at one end for solvent cement weld (Any other pipe length can be supplied on request). Applications Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.

Convenient push-fit joints. Saves manpower. Jointing can be done during any time of the day under any weather conditions. Faster installation, immediate pressure testing and commissioning possible. Joints accommodate expansion and contraction. Joints are resistant to soil movement due to earthquake effects. The elastomeric rings have properties matching to Pipe with long shelf life. Available as per IS-4985, ISO-1452-2 and DIN-8062. Available in sizes & pressure classes shown in the table in Green colour. Applications Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.

Manufactured from special grade virginplastic material Use of state–of–the–art technology ensures close dimensional tolerance and longer life. Resistant to UV radiation & environmental effects. Cylindrical dripper with an inbuilt silicone diaphragm ensures consistent performance for longer time. Online stringent quality checks at every stage. Especially suitable for undulating terrain and steep slopes. Wide pressure compensation range. Self cleaning, diaphragm retracts dynamically to throw away particles which are blocking the emitter. Specially designed emitting pipe fittings are available. Please refer to ‘Polyfittings & Accessories’ pages. Available in nominal OD of 16mm, 20mm Minimum 100 micron filtration recommended. Available in standard dripper spacing 20,30, 40, 50, 60, 75 & 90 cm. Other spacings available on demand. On request Turboline PC® can also be supplied in group spacing. On demand, available with rodent deterrent feature. Ideal for irrigation of closely spaced row crops like sugarcane, cotton, banana, strawberry, floriculture, vegetables and spices. Suitable for surface as well as sub–surface irrigation. Recommended for undulating terrain & steep slopes and where longer lateral running length is necessary.

Seamless drip tape with integrated emitter strip welded inside. Seamless construction improves ability to withstand pressure fluctuations. Manufactured from special grade virgin polymer ensuring close dimensional tolerance even at lower wall thickness. Manufactured with the most modern, state-of-the-art equipment. Its computerized continuous online quality control ensures reliable quality and consistent performance. Precisely formed flow path resulting in an extremely low manufacturing coefficient of variation, (CVm) ensures high field emission uniformity. Truly clog resistant design due to: Multiple, fine inlet filters that prevents the entrance of soil, silt particles and algae of size larger than flow path cross section. Dual entry filter segments allows water entry from two side maintains unobstructed water flow. Flexible bottom wall, expands and pushes any particulate matter that tend to block the flowpath. It also helps to break the deposited salt scaling and pushes it out of the emitter. Innovative, laser drilled slit outlet closes when system is pressureless. This inhibits the root intrusion and prevents soil suction. Large cross sectional area and hydrodynamically designed turbulent flow path prevents squirting and makes the emitter clog resistant. Smooth inner surface allows longer lengths. Available in 12, 16, 17, 19 and 25 mm nominal diameter as per metric standard. 5/8", 7/8", 9/8" and 1-3/8" nominal diameter as per US standard. Available in wall thickness ranging from 6 to 25 mil (0.15 to 0.63 mm). Flexibility in selection of discharges and outlet spacing. Uniform water spread gives high distribution uniformity and improves water application efficiency. Specially designed Tape Lock™ fittings are available. Minimum 100 micron filtration recommended. However required filtration type and precision depends upon quality of source water. Recommended for closely spaced seasonal row crops like sugarcane, cotton, chilly, potato, ground nut, onion, vegetables, oil seeds, banana, strawberry, floriculture etc. Recommended for irrigation in green house/ shade house. Suitable for subsurface and surface applications.

Features and Specifications Turbulent flow path resist clogging. Strong ribbed stake allows exact positioning of the dripper. Can be used with 6mm OD extension tube or vinyl tube. Easy to install. Colour of the dripper represents flow and facilitates easy identification. On demand can supply assembly including dripper attached with required length of extension tube and take off. Minimum filtration requirement - 100 micron. Applications Suitable for pot irrigation, nurseries, glass/green houses, vegetables, home gardens.

  Features and Specifications Manufactured from virgin plastic for stable performance. Factory sealed emitter. Side flow path with wide cross sectional area. Hydraulically designed flow path maintains turbulence till the end of flow path length to make emitter clog resistant. Bottom outlet helps to prevent entrance of the soil through outlets. Narrow cross shaped inlet acts as a filter. Coloured base facilitates easy identification of flow rate. UV stabilised. No environmental effects. Manufacturing coefficient of variation, CVm ≤ 3%. Best field emission uniformity. Required punch diameter 2.9 mm. Minimum filtration requirement - 100 micron. Applications Recommended for irrigation of vineyards, fruit orchards, vegetables.

  Features and Specifications Manufactured from high quality polymers. Holds the PE tube firmly at required position. Avoids dispositioning of PE tube. Distributes water evenly. Used with micro tube of 1.0 mm (0.036") ID, 1.3 mm (0.05") ID, 3.3 mm (0.13") OD and 1.5 mm (0.06") ID. Recommended operating pressure of 0.5 kg/cm2(7psi)for 1.00mm(0.036")ID tubing and 0.35 kg/cm2(5 psi)for 1.3mm(0.05")and 1.5 mm(0.06")ID tubing and for 60cm(24")length of tubing. Easy to Install & Monitor. Applications Ideally used for irrigation in bag culture. Recommended to use where dispositioning of tubing is a problem. Performance Graph

We offer you, ‘Bacterial Blight Free’ planting material. We offer you ‘Juvenile Planting Material’ that has long life. We offer you, ‘Guaranteed Survival’ of the plants after transplantation in the field. We offer you, ‘Jain Prunning Technology’ to produce large canopy to bear more fruits and sustain their load. As a result plant gets ready for first flush within 18 months. We offer you ‘Jain Fertigation Technology’ for higher productivity and superior quality of the produce.

We are offering surface pumps. Jain solar water pumping systems is a stand-alone system operating on power generated by solar photovoltaic panels.•village water supply • livestock watering • water supply to remote homes agriculture •micro-irrigation

Chemical resistant raw materials. The optimal solution for cooling, humidifying and pesticide spraying in greenhouses. Very small droplets (average of 90 microns) for minimal foliage wetting ( pulsed operation). Two nozzle fogger with built-in Leakage Prevention Device. Precision engineering to give fine droplets (average 90 microns). Economical. Excellent Coverage. Easy to install and service. Different connection options suitable for PE and PVC pipe. Discharge - 13 lph ( 2 x 6.5 lph outlets ). Operating pressure: 4.0 kg/cm² (56.88 psi). Recommended spacing: - For cooling and humidifying only:    3.0 to 4.0 m between laterals.   2.0 to 3.0 m between Foggers.- For cooling, humidifying and spraying :   2.0 to 3.0 m between laterals.   1.5 m between Foggers. Minimum filtration requirement 75 micron.

Special Filter Design Tangential inlet protects the screen from direct impact of sharp/angular particles Unique Smart Clean Element Equipped with Smart–Clean, Unique filtering element, to assure high performance and effective filtration. Easy for Maintenance Strong and smooth opening and closing for cleaning screen element Standard Epoxy Coating for Protection from Corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects Various Connection Options Available Threaded connection, Flanged connection or Easy Fix™ connection available Draining Facility Available Slant drain valve position at the bottom facilitates effective flushing Mild steel Construction And ‘L’ shaped body allows installation in angular fashion. Available in standard mesh of 100 micron size. (other mesh sizes available On demand). Flow direction from outside of the element to inside (Out to In). Maximum operating pressure 6 kg/cm² (142 psi). Epoxy coated stand for support and proper installation of the filter available as optional. On demand, Super–Clean filter can also be supplied with automatic flushing option. Super–Clean filter can also be supplied in stainless steel body. Can be supplied in multiple batteries option

We are offering submersible pumps. Jain solar water pumping systems is a stand-alone system operating on power generated by solar photovoltaic panels.•village water supply • livestock watering • water supply to remote homes agriculture •micro-irrigation

Full circle impact sprinkler. Adjustment arc from 30° to 360° for Part Circle. Corrosion proof I-beam construction for added strength. Stainless steel spindle, fulcrum pin and spring. Well balanced gunmetal swing arm ensures smooth and uniform rotation. Brass nozzles with hydrodynamically designed inner profile for precise jet and longer radius of throw. Easy to install and maintain. Uniform precipitation rate. Applications Suitable for field crops like pulses, oil seeds, vegetables, sugarcane, cotton, cereals, tea, coffee and fodder crops.

Radially Convergent Grooved Discs Disclean® element with strong, precision engineered and radially grooved disc to provide fine three dimensional filtration. (Flow direction Out to In) Standard Epoxy Coating for Protection from Corrosion Coated with more than 70 micron thick light blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects Various Connection Options Available Threaded connection, Flanged connection or Easy Fix™ connection available Separate Draining Facility Available Large volume of dirt collection chamber with drain valve for Hydrocyclone filter and separate drain valve for Disc Filter Special Rubber Cone Special rubber cone is provided at the bottom of the cone of Hydrocyclone filter to prevent wearing Equipped with Pressure Check Assembly To check pressure from inlet side and outlet side, additional Pressure check assembly provided Mild steel construction. Dirt can be easily flushed out through dirt collection chamber. Available in maximum operating pressure of 6 kg/cm² (142 psi). Can also be supplied in stainless steel as a special order. Can be supplied in higher flow capacities in multiple batteries option.

We offer Solar and Wind Hybrid Stree Light Systems as Green Energy Solution. The power source od a wind solar hybrid street lighting system is natural wind and solar radiation. This hybrid system is more cost-effective and reliable in the wind available zone. The whole system can also be used for home power generation and capacity will depend on load. The hybrid lighting systems are self-sufficient, standalone solutions that do not require the construction of costly mains grid electricity supply infrastructure nor the burden of their associated operating expenses. The systems are ideal solutions for many applications in cities and rural areas, providing lighting to enhance security and safety. Power generation is dependent on the availabilityof wind and solar radiation. System output : DC and AC current simultaneously, and a wide voltage range Automatic system operation Wind Turbine can be from 300W to 4200W in the wind velocity range of 3.1 m/sec to 15 m/sec. System consists of Luminaries, Lighting pole from 5M to 30M height, Deep Cycle Tubular Lead Acid Battery, Solar Panels, etc. The Lighting Fixture available in different type, lighting bulb in different Lumen flux Features and Specifications A long life span of system components - - Wind turbine with 15 years - Solar module with 25 years Ecologically sound Clean renewable energy reduction of carbon footprint Low Maintenance Enchance neighborhood security Cost effective long term lighting solutions

No inverter - D.C. motor connects directly to solar array Rugged construction Simple installation and maintenance Highly reliable No conventional grid electricity required Long operating life Highly reliable and durable Easy to operate and maintain Eco-friendly No fuel cost- uses abundantly available free solar energy Solar Photovoltaic Panels Stand & Accessories Solar submersible pump Applications Village water supply Livestock watering Water supply to remote homes / agriculture Micro-Irrigation Submersible Pump Jain Solar Water Pumping Systems is a stand-alone system operating on power generated by Solar Photovoltaic Panels. The power generated by Solar Panels is used for operating Solar Submersible pump for lifting water from open well, water reservoir or tube well for irrigation and drinking water purpose. The system requires a shadow-free area for installation of the Solar Panels.

With Jain Solar Water Heater You will have hot water when you need it, have no recurring cost of electricity, years of trouble free use and the assurance of a great service backup from the Jain Group. In other words, total peace of mind! Whats more, you will be helping the environment. What is Jain Solar ? It is an equipment to heat Water using solar energy. It does not produce electricity but carries heat energy. Jain Solar is manufactured to satisfy your hot water needs. It is ideal for domestic use. Why Jain Sunlight ? Benefits : Negligible maintenance, daily water heating expenses almost nil, conserves precious natural resources, exemption from octroi & excise duty, 80% depreciation for commercial use. Features :Saves energy & environment, easy to install & maintain, no fear of shock/ accidents, long life, huge savings. Uses :Bungalows, Apartments, Guest Houses, Lodges, Hotels, Hospitals, Heath Clubs, Dairies, and wherever & whenever you need hot water. Models :Jain Sunlight evacuated tube collector system is for non pressurized application. Available in 100 to 500 LPD. Higher capacity systems are available on request. Evacuated tube collector This is heart of the solar system. Evacuated tubes are made up of borosilicate glass coated with AL-N/AL using sputtering technique. This is worlds latest innovative technique of black coating to achieve highest efficiency. Insulated Hot Water Tank Stainless Steel hot water tank with outer cladding of G.I. precoated sheet, insulated with 40 mm thick PUF insulation. This ensures least overnight temperature drop. Mounting Racks Generally, mounting racks are designed for flat roof. This rack is assembled by SS. Fasteners at site using L-shaped pre-fabricated & powder coated steel sections. How about rainy season? Jain Solar is designed for year round performance. It needs about 7 hours of normal solar radiation for desired performance. As an auxiliary support, electric heater is fitted when hot water availability is not as expected. Assurance from the Company Each Jain Sunlight carries a unique & solid assurance from the Company. It comes from a 3000 crores company committed to water conservation & environment protection. With over 490 crores of exports in extruded / moulded plastic & micro irrigation systems, galaxy of awards & recognition from TUV NORD for ISO 9001-2000 for all its divisions, the company is poised for a big leap. As a proud owner of Jain Solar Water Heater, welcome to the family of happy satisfied customers!

Very useful technology to move the panels in such a way that they continuously face the Sun. Up to 35% additional output. Reliable, economical and maintenance-free system.