jsk industries pvt ltd Fort, Mumbai, Maharashtra

zinc alloy ingot registered Primary Grade Ingots either from the Domestic Primary Producers or International Suppliers.

Product Description   Non-heat-treatable alloy Principle alloying elements: none (primary trace elements: magnesium, iron and silicon) Standard diameter: 6.4 mm, 7.6 mm, 9.5mm, 12.7 mm, 13 mm, 15 mm. (Tolerance +/- 0.5 mm) Standard Packaging Weight: As per customer need Option: Palletized, eye vertical or horizontal Rod surface condition: very clean to oiled End - Use Application Deoxidation of steel through ladle refinement   General Information In the pursuit of correct steel chemistry, temperature and the maximum removal of sulphur, phosphorus and dissolved gases, the single most important step is the deoxidation of steel.   Advantages Of Rod Ease of addition Rapid rate of reaction Low cost Strong affinity for oxygen Grain refinement properties  

Features : Corrosion proof,High tensile strength

Material : Aluminum

Color : Sliver

JSK’s aluminum rod for mechanical purposes meets or exceeds the following ASTM specifications: JSK manufactures aluminium rod according to all international standards (BS, DIN, IEC, NFC, CSA etc) upon request.

Specifications JSK’s aluminum rod for electrical purposes meets or exceed the following ASTM specifications:   JSK manufactures aluminium rod according to all international standards (BS, DIN, IEC, NFC etc) upon request. The following are the principal products being marketed:

Type : Strip / Wire

Applications Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.   Specifications JSK's bare ACSR conductors can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc   Construction ACSR is a concentrically stranded conductor composed of one or more layers of hard-drawn 1350H19 aluminum wire stranded with a high strength coated steel core. The core maybe single wire or stranded depending on the size. The proportions of aluminum and steel can be varied to obtain the relation between current-carrying capacity and mechanical strength best suited to each application. Core wire for ACSR is available with Class A, B or C galvanized; "aluminized"(AZ); or aluminum clad (AW). Additional corrosion protection is available through the application of grease to the core or complete cable with grease.

Application : Used for overhead transmission.

Applications Used as bare overhead transmission cable and as primary and secondary distribution cable. A good strength-to-weight ratio makes ACAR applicable where both ampacity and strength are prime considerations in line design. For equal weight ACAR offers higher strength and ampacity than ACSR.   Specifications JSK's ACAR bare conductors can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc   Construction Aluminum alloy 1350-H19 wires, concentrically stranded about an aluminum alloy 6201 core. Although the alloy strands generally comprise the core of the cable, in some constructions they are distributed in layers throughout the aluminum (alloy) 1350 H19 strands

Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity. ACSR is a concentrically stranded conductor composed of one or more layers of hard-drawn 1350H19 aluminum wire stranded with a high strength coated steel core. The core maybe single wire or stranded depending on the size.

Applications Used as bare overhead transmission and as primary and secondary distribution cable. ACSR/AW offers strength characteristics similar to ACSR, along with slightly greater Ampacity and resistance to corrosion due to aluminum-cladding ofthe steel core wires.   Specifications JSK's bare ACSR/AW conductors can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc   Construction Aluminum alloy 1350-H19 wires, concentrically stranded about an aluminum-clad steel core.  

Applications Used as bare overhead transmission cable and as primary and secondary distribution cable. AACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing Ampacity.   Specifications JSK's bare AACSR conductor can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc   Construction AACSR is a concentrically stranded conductor composed of one or more layers of 6201 -T81 aluminum alloy wire stranded with a high-strength coated steel core. The core may be single wire or stranded depending on the size. The proportions of aluminum alloy and steel can be varied to obtain the relation between current carrying capacity and mechanical strength best suited to each application. Core wire for AACSR is available with Class A, B or C-galvanized; "aluminized" (AZ): or aluminum clad (AW). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease.  

JSK’s aluminum rod for mechanical purposes meets or exceeds the following ASTM specifications: JSK manufactures aluminium rod according to all international standards (BS, DIN, IEC, NFC, CSA etc) upon request. Aluminum and Aluminum Alloy Bar, Rod and Wire, Aluminum and Aluminum Alloy Rivet and Cold Heading Wire and Rods.

Applications These Conductors are used primarily for overhead transmission and primary and secondary distribution, where Ampacity must be maintained and a lighter conductor (compared to ACSR) is desired, when conductor strength is not a critical factor. Classes B and C are used primarily as bus, apparatus connectors and jumpers, where additional flexibility is required.   Specifications JSK's AAC bare conductors can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc   Construction Aluminum alloy 1350-H19 wires, concentrically stranded

Applications Used as bare overhead conductors for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC-6201 higher resistance to corrosion than ACSR.   Specifications JSK's AAAC-6201 bare conductor can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc   Construction Aluminum alloy 6201 wires, concentrically stranded.

JSK's bare ACSR conductors can meet any International Standard including ASTM, BS, DIN, IEC, NFC etc ACSR is a concentrically stranded conductor composed of one or more layers of hard-drawn 1350H19 aluminum wire stranded with a high strength coated steel core. The core maybe single wire or stranded depending on the size. The proportions of aluminum and steel can be varied to obtain the relation between current-carrying capacity and mechanical strength best suited to each application.

acsr cable Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.