Kaliraj Impex Girgaon, Mumbai, Maharashtra

Material : Copper

Packaging Type : Box

Application : Air Condition, Refrigerator, Oil Cooler Pipe

Thickness : 0.1-15 mm

Material : Copper

Shape : Round

Technical Data :   Mexflow meets the mandatory inspection requirements: Chemical composition -Phosphorous = minimum 0.015%. max 0.040% Carbon Content Test -Window based software determines the content of carbon on the inner surface of copper tubes and fittings using combustion method, Tensile strength -Mexflow pipes have been tested to the best of its tensile strength keeping in mind all the testing norms in the industry. Non Destructive test -Each tube is subjected to an Eddy current test for detection of local defects. We are the only manufacturer of this category (Medical) of tubes Mexflow Copper Tubes -Compatible for CFC-Free Refrigerant for VRV, VRF, RACs, Visicooter, Refrigerator and Other ACR Applications, The use of copper in air-conditioning and refrigeration systems has grown steadily in recent years. MEXFLOW tubes increases the efficiency of the system and substantially reduces the emission of harmful gases and SPMs. MEXFLOW copper tubes are designed for longer service life. Mexflow Copper Pipes Are Also Available With Mexflow Copper Fittings For The Complete ACR Applications. Other Applications of MEXFLOW Copper Pipes: Medigas Pipeline Plumbing LPG/CNG Gas Pipeline I City Gas Distribution.   Copper Tubes : 3/16 Dia to 6 Dia Copper Fin Tubes Copper Fittings - 1/4 Dia to 5 Dia Only manufacturer in India having In-House Carbon Content Test facility as per EN 723   Applicable Standard : Copper Tubes : BS 2871 Part I - Copper Tubes for water, gas & sanitation iBS EN 1057 -Seamless, round copper tubes for water and gas in sanitary and heating applications iASTM B 88 - Seamless Copper Water tube   Requirements as per EN 1057 : Chemical Composition -Copper Tubes ore designated under alloy C 106 also called DHP (Deoxidised High Residual Phosphorized Grade). The requirement is as follows : Min. Copper including Silver % – 99.9% Dimensional Tolerances-Dimensional tolerance to confirm to the EN 1057. It must be noted that the dimensional tolerance on copper tubes as specified for the outside diameter is very important so that the annual gap between the tube & the fitting is within a designated dimensional tolerance to ensure correct & proper capillary action during the process of soldering or brazing. Please refer to Table 1,2 & 3 for dimensional tolerance on outside diameter, dimensional tolerance for wall thickness is given below: Freedom from Defects Surface Quality -The outer diameter & inner surface of the tube shall be clean & smooth. An attack on copper tube can occur causing pitting corrosion when a thin film of carbon is formed within the bore of the tube during the manufacturing process. Concern over deleterious film in the bore has prompted the newly adopted EN 1057 to call for a carbon film & carbon content test, concerning the measurement of the residual & potential carbon in a copper tube bore. MEXFLOW Copper Tubes meet this criteria. Freedom from Defects Tests - Each lube shall be subjected to one of the following test: Eddy current test for detection of local defects, in accordance with pr EN1971. Or Hydrostatic test or Pneumatic test. The choice of the method selected from the above, is at the discretion of the manufacturer. Bending - Hall hard copper tubes and soft annealed copper tubes must undergo a bending test without formation of wrinkles on the inner bend. Bending is an expansion of the outside surface of the bent tube & a contraction of the inner surface of the tube. The formation of wrinkles on the inner surface shows either the fact that the physical properties of the tube are not in order or the bending mechanism i.e. the bending tool has got a gap more than the diameter of the tube, which allows the tube to get raised while conducting the bending operation from the former, allowing wrinkle formation to take place on the inner surface.

Material : Copper

Our desire is to increase the value of our products to our customers based on continuous technological innovation and on the competence and motivation for our employees.We will be the most customer-focused competitive technologically advanced and quality-minded copper tube mill in the world. Within a short period since the start of the operations, MetTube has grown strongly and established itself in the global market as reliable and high-quality supplier of repute and exporting 90% of the output to all corners of the globe Level Wound Coils Inner Grooved Tube Outer Diameter 5.0 – 12.7 mm Wall thickness 0.24 – 0.55 mm Plain Tube Outer Diameter 4.0 – 25.4 mm Wall thickness 0.28 – 1.22 mm Straight Lengths Plain Tube Outer Diameter 4.76 – 25.4 mm Wall thickness 0.28 – 1.63 mm   Pancake Coil : Plain Tube Outer Diameter 4.0 – 25.4 mm Wall thickness 0.28 – 1.22 mm (SWG 19 to 29)   Level Wound Coils : 90, 125, 180kg Straight Lenghths 5.50m Max (Annealed) 6.00m Max (Hard Drawn)   Pancake Coil 15.24, 30.38m (50′,100′) 15.00,30.00m   Level Wound Coils Light Annealed (OL) Soft Annealed (O)   Straight Lenghths : Light Annealed (OL) Soft Annealed (O) Hard (H) Pancake Coil : Light Annealed (OL) Soft Annealed (O)

Material : Copper

Application : Gas Pipe,Hydraulic Pipe,Structure Pipe

Size : 1/4 inch-1 inch,2 inch-3 inch,1 inch-2 inch

Brand : Kaliraj Impex

Material : Copper

Characteristics : Low thermal conductivity and high moisture resistance: Superlon’s insulation materials are produced with a high percentage of closed cells. Superior fire performance: Superlon’s insulation materials are available in Class Class 0 and FM Approved. In addition, Superlon insulation materials have a high oxygen index. Continuous commitment to provide the best: Superlon invests in R&D and are striving to further enhance its formulation to provide the best insulation solution.   Fast and easy installation -Superlon insulation materials are very flexible allowing installers to fabricate, cut to specific shapes, sizes and fittings for fast and efficient installations.   Low Allergen -Unlike other types of insulation products, Superlon insulation materials are dust and fiber free which do not present any health related hazards.   Eco Friendly-Superlon materials have zero Ozone Depleting Potential (ODP), zero Global Warming Potential (GWP) and low Volatile Organic Compounds (VOC). Applying Superlon Insulation materials properly also helps to reduce energy consumption of air conditioning and heating units.   Aesthetically pleasing -Although Superlon’s insulation materials are mainly black in color, the surface of the skin is smooth presenting a respectable finish on any given job type. Color products are also available.

Thickness : 1.0,5 Mm

Length : 6 M

Thickness : 6 mm to 25 mm

Shape : Rectangular

Material : Copper

Indigo tubes are 100% carbon free. All tubes are cleaned and the sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2). Coils are normally furnished in ‘O60’ temper and straight lengths in H58 temper. 100% RoHS Compliance.

Thickness : 10SWG (3.2mm) to 27SWG (0.4mm)

Application : ACR, Instrumentation, Railways, General Engineering etc

Shape : Round

Usage : Industrial

Packaging Type : Box

Material : Copper

Application : Structure Pipe, Gas Pipe, Hydraulic Pipe

Size : 2 inch, 3 inch, 1/2 inch, 3/4 inch, 1 inch

Material : Copper

Shape : tee

Connection : Male

Material : Copper

Length : 10 to 15 m

Thickness : 0.2 mm-120 mm

Material : Copper

Hailing from Mumbai(India), we are catering to the nationwide requirement with our superior products. With the aid of diligent team of professionals and brilliant packaging system, we are able to meet standard as well as tailored packaging requirements of the patrons.

Grade : ASTM B68 / ASTM B75 / ASTM B280 / ASTM B88 / JIS H 3300

Material : Copper

Material : Copper

Size : 1-5 inch

Grade : Grade

Shape : Round

Applications : Fluid, gas and oil transport Pressure and heat transmission Construction and ornament Boiler heat exchangers Elaborate designs available as per customers’ requirements

Thickness : 1mm To 10mm Or Customized

Length : 2m,27.5MM,2.5m

Ours is a renowned name in the field of supplying comprehensive array of Copper Fitting Reducer. We are highly concerned towards providing the top-notch array of products to the buyers and thus, check the lot at different levels for quality assurance.

Material : Copper

Material : Copper

Size : 3 inch,1 inch,>3inch,2 inch

Before making the final dispatch, our entire lot is carefully stored in our capacious warehouse under the administration of experts. Thus, there are minimal chances of defects at buyer's end. We are well equipped with the most recent machines and technology that help us in conducting stringent check on the raw materials that are used while manufacturing.

Material : Copper

Grade : A

Thickness : 2mm- 10mm

Connection : Welded

Application : Gas Pipe, Structure Pipe

Material : Copper

Thickness : 2mm- 10mm

Shape : Cross

Material : Copper

Shape : Round

Condition - Hard Or Annelead   Product Application Areas -Refrigeration, Air Conditioning, Thermostate, Relay.   Characteristics -A Commercially pure copper that has been deoxidized with phosphorous in such a manner as to leave a high residual phosphorous content which is not readily susceptible It has good thermal conductivity.    Packing Styles : Standard Packing. Mini Coil 25ft. Long Medium Coil 50ft. Long Large Coil 100ft. Long.  As per customers requirement.

Application : Industrial And Residential Use

Thickness : 0.27 Mm-2.0 Mm

As we have the fastest transit facility, we are capable of delivering the orders within the postulated time. To pack our products, we have ultramodern machines. The packaging materials are nontoxic, sturdy and reliable. The products remain safe and undamaged in our packaging.

Material : Copper

Length : 300 Mm – 500 Mm