Knife Gate Valves Dealers in Goregaon, Mumbai

Ambika Gate valves are designed to provide minimum turbulence & resistance to flow when in fully open position.  Sufficiently long guide ribs in the body along with accurately machined wedge guide slots ensure accurate control & alignment of wedge while operating wedges are generally solid type & are accurately machined, precisely aligned & perfectly lapped with renewable seats in carbon steel & integral seats in stainless steel.  All the valves have back seat arrangement as an additional sealing under full working pressure which facilitates replacement of packing with valve under fully open condition.

We are the supplier of this product.

• Material: Metal
• Usage/Application: Air Processing
• Automation Grade: Manual
• Rust Resistance: Yes
• Finish: Coated
• Size: Available in Different Sizes

Valves Code API 600 / BS 1414 End to end Dimension ANSI B 16.10 / 2080   End Flanged Flat / Raised Face, drilled to ANSO B 16.5 / BS 1560   Bonner Bolted   Stem Rising   Wedge Solid / Flexible   Seat seal Welded / Renewable - Screwed   Stem Packing Renewable with Valve open on stream   Testing Code MSS SP 61 / API 598 / BS 6755   Handwheel non rising   Others Outside screw and yoke Gear Operation ( for DIA>14" ) Size : - 2''-48'' Rating 150#                                             2''-36'' Rating  300#                                            2''-24' Rating 600#  

• Size Range: 2“ – 72”
• Pressure Rating: PN10, PN16, PN25
• Temperature Range: Up to 120°C
• Connections: Flange, Mechanical Joint, FLxMJ,
• Body Material: Ductile Iron, Stainless Steel
• Operating: gear box, electric actuator, Handwheel

Seal Options Resilient Wedge Seated, MetalSeated

We offer Gate Valve. Model : GT-1-F-F-A1 (150#), GT-1-F-F-A2 (300#), GT-1-F-F-A3 (600#) Size : 40-600 mm Bore : Full Material : Carbon Steel, Stainless Steel Ratings : 150,300 &600 Class Ends : Flanged & Butt weld on request Option : Stellite Trim, Jacketing, Soft Seating

To deliver the products in a safe manner at customer's end, we have exceptional warehouse management system. We have a voluminous warehouse, installed with all required facilities essential for safe storage of the orders. With exceptional transportation facilities, our diligent team delivers the product basket in the committed time span.   Our Features : Basic Design  -  API 600, ANSI B16. 34, BS 1414 Test - API 598, BS 6755 Size - 2" ~ 52" Rating - ANSI 150lb ~ 2500lb Body materials - Carbon Steel, Stainless SteelAlloy Steel, Duplex Steel Trim - Per API 600 Operation - Handwheel, Gear, Motor, Pneumatic operator

• Class: 800 / 150 / 300

We are offering Gate Valve, Manufacturing Standard - API 602 Testing Standard - API 598 BS 5416 Socket Weld & Threaded to - ANSI B 16.11 ANSI B2.1 Flanges To- ANSI B 16.5 Face to Face to - ANSI B 16.10.

• Media: Water
• Material: Brass, Bronze
• Size: 1/2 to 3 Inch

Tiger" Brand Gate valves offers a comprehensive range of Gate Valves. For the past decades our customers worldwide have trusted us to provide them with consistent and reliable valve products in their most severe and critical service. Gate Valve are designed to operate fully open or closed. Because they operate slowly they prevent fluid hammer which is detrimental to piping systems. There is very little pressure loss through gate valve. In the fully closed position, gate valves provide a positive seal under pressure. FEATURES Available in a variety of end connections. Available in Stainless Steel Spiral wound and Asbestos Graphite gasket for more safety. Various types of Coating used to avoid corrosion. Hydraulic Test Pressure: (BODY) up to 210 Kg/Cm². Hydraulic Test Pressure: (SEAT) up to 150 Kg/Cm². Pneumatic Test Pressure: up to 7 Kg/Cm². NDT (Non Destructive Test) available on request. IBR Form III C will be available on request. Standards Followed: ASME B16.34/ B16.11/B1.20.1/BS 1873/API 602/ISO 15761. Marking and Identification of Valves as per MSS-SP-25.

• Design and Manufacturing: : IS 14846: 2000
• Valve face to face dimensions: : IS 14846: 2000
• Valve Inspection and Testing: : IS 14846: 2000
• Flange Standard: : IS 1538/BS 10 Table D/E
• Size Range: : 50 mm TO 600 mm

We are a leading manufacturer, trader and supplier of high quality Sluice Valve. This is used water works purpose. It is fabricated by our professionals using high grade factor inputs and latest technology in conformity with IS: 14846 standards. The offered range is thoroughly tested by our quality controllers in order to ensure its flawlessness. Clients can avail this product from us at market leading prices. Features: Perfect finish Splendid quality Smooth finish Application: The sluice valves are strictly designed in accordance with IS: 14846 and are used for water works purpose. Sluice valves are not suitable for throttling purposes. The control of flow is difficult because of the valves design, and the flow of fluid slapping against a partially open gate can cause extensive damage to the valve. Expect as specifically authorized, gate valves should not be used for thrilling.   Accessories:Mechanical – Worm Gear Actuator, Spur gear, Channel & shoe and Indicator arrangement, Bevel gear Arrangement, Spur gear differential Indicator Automatic – Pneumatic Actuator, Electrical actuators 

ball valve with actuator, Pneumatic Actuator

Electric Wafer Knife Gate Valve, Pressure Gauge Needle Valve Flange

Flanged Union Bonnet Wheel Valve, Driver Gloves

SHADOW SHIELD BED, Butt Weld Pipe Fitting

tube pipe fittings, Manifolds, Tubings, Ball Valve

knife edge, Sluice Valves, stainers, Check Valves

Parallel Slide Blow Off Valve, Wheel Valve, Syphon elbow

gate valves globe valves, Ball Valve, Pneumatic Cylinder, Check Valves

Continuous Stirred Tank Reactor, Tube Fitting, Tee Fitting, Reducer Fittings

Hand Slide Valve, Air Operated Manual Valves, Dual Press Valve