Knife Gate Valves Dealers in Masjid Bunder, Mumbai

• Features: Perfect finish , Durable, Affordable .

• Material: Metal
• Application: Water Fitting
• Weight: 15-20kg
• Condition: New
• Brand Name: Kcass, Aarpee
• Size: 100-150mm

• Valve Size: 15 mm to 600 mm
• Material: Body WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc, Trim 13 % Cr, Stellite etc
• Operation: Manual,Pneumatic,Electric
• Ends: Flanged End,Butt Weld End

• Size: 15 MM TO 50 MM
• Design: API 602
• Testing: API 598/ BS 6755 PART I
• SW End: ANSI B 16.11
• BW End: ANSI B 16.25
• Screwed End: ANSI B 1.20.1/ ANSI B 2.1
• MOC: A 105/ F 304(L)/ F 316(L)/ F 11/ F 22
•  :  
•  :  

• Size: 15 mm to 300 mmm
• Material: Casting
• Structure: Shutoff

• Material: Nickel Alloy
• Valve Size: 15 mm to 100 mm
• Type: Flanged Type
• Range: 1 MM to 200 MM thickness in 1000 MM to 3000 MM width x 2500 MM / 5000 MM/10000 MM / COIL
• Ends: Screwed / Socket Weld / Flanged
• Temperature Of Media: Low Temperature

Nickel Alloy : ASTM / ASME SB 162 UNS 2200 (NICKEL 200)/UNS 2201 (NICKEL 201), ASTM / ASME SB 127 UNS 4400 (MONEL 400), ASTM/ASME SB 424 UNS 8825 (INCONEL 825), ASTM/ASME SB 168 UNS 6600 (INCONEL 600)/UNS 6601 (INCONEL 601), ASTM / ASME SB 443 UNS 6625 (INCONEL 625), ASTM/ASME SB 574 UNS 10276 (HASTELLOY C 276), ASTM / ASME SB 462 UNS 8020 (ALLOY 20/20 CB 3).

• Brand Name: Audco
• Valve Size: 2 Inch
• Media: Water, Gas, Fuel, Powder/Solids
• Material: Stainless Steel
• Pressure: Upto 150 kg/cm2
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• Power: Hydraulic, Manual, Pneumatic, Hydraullic
• Class Type: Class 150
• Net Weight: 21 kg
• Body Material: ASTM A216 Gr. WCB

We are offering wide range of Gate valves manufacturers in India.Gate Valves are largely designed to start or stop a flow when a straight line flow of fluid and minimum flow restriction are needed. In service, these gate valves are pretty much kept either fully open, or fully closed. Gate valves are primarily made up to start or stop a flow when a straight line flow of fluid and minimum flow restriction is needed. In service, these Gate valves manufacturers in India are pretty much kept either fully open, or fully closed. When turned open, the disc of the gate is completely removed allowing materials to pass. This gives the gate valve good shut-off property and allows it a bidirectional movement. They cannot be quickly blocked or unblocked. The Gate Valves shakes when it is blocked.

SPECIFICATION : CONNECTION : FEMALE THREAD (BSP/NPT). MAX OPERATION TEMPERATURE : -50°c ~ +232°C MAX OPERATION PRESSURE ASTM A182 F316 : 5000PSIG BRASS : 3000PSIG AVAILABLE WITH PLASTIC OR SS/ALUMINIUM BAR HANDLES. SIZE RANGE 1/8" UPTO 1"

• Size: 2" to 36" (150#)
• Type: Bolted bonnet & OS & Y Type, Pressure Seal, Jacketed, Cryogenic
• Manufacturing Standard: API 600/ BS 1414
• Body Materials: Carbon Steel, Alloy Steel, Stainless Steel, Duplex Steel
• Operation: Hand Wheel, Gear, Electric Actuator, Pneumatic, Actuator
• End Connection: Flange End, Butt Weld End, RTJ

• Material: Stainless Steel
• Color: Black, Blue, Brown, Grey, Red, Silver, All
• Size: 1012ft, 2x6ft, 3x6.5ft, 4x6ft, 6x6ft, 8x10ft
• Feature: Anti Bacterial, Anti Corrosive, Anti Dust, Anti Zunk, Durable, Eco-Friendly, High Quality, No Transparency, Shiny Look
• Country of Origin: India
• Finishing: Non Polished, Polished

stainless steel forged gate valves, alloy steel gate valves, carbon steel gate valves, duplex steel gate valves, brass gate valves suppliers in india.  

• Country of Origin: India
• Type: Industrial Valves
• Brand Name: Wadia enterprise
• Material: Cast Steel
• Certification: ISO 9001:2008 Certified
• Usage: Oil Fitting
• Color: Blue
• Temperature Pressure: Medium Temperature Pressure
• Number Of Way: 2way
• Packaging Size: 5 Pieces
• Condition: New
• Finishing: Coated
• Corrosion Resistance: Yes
• Mounting Type: Vertical
• Warranty: 1 Year
• Driving Mode: Gear
• Media: Water
• Actuation Type: Gear
• Automatic Grade: Manual
• Overall Length: 10feet
• Diametre (milimetre): 1200mm
• Packaging Type: Wooden Box
• Weight: 5750kg
• Diameter (mm): 1200mm
• Working Pressure: 24kg
• Current Leakage: 00
• End Connection: Flange end

Adjustable Wrench, Ball Bearings, DOUBLE OPEN ENDED SPANNER, Hammer

• Size: 1/4" TO 3"
• BODY: BRASS
• TRIM: BRASS
• CONNECTION: BS21 PARALLEL

• API 6D / API 600 / API 6A / MSS SP-67: API 598
• ANSI B 16.5: ANSI B 16.11
• ANSI B 16.25: ANSI B 1.20.1 / ANSI B 2.1
• ANSI B 16.10: API 6FA

ASME B16.10 Gate Valve Stockist | 300 Class Gate Valve | 600 Class Gate Valve | ANSI B 16.11 Gate Valve Speco Alloys Inc are dominant manufacturers of superior quality of Gate Valve. At Speco Alloys Inc, a significant emphasis is laid on ensuring of service delivery and quality. Speco Alloys Inc delivers at your expectations, product ranges from across overall piping solutions. Speco Alloys Gate valves are the most ordinarily utilized shutoff valve in the business today. They are utilized where least weight drop and bi-directional on-off administration is required. Speco Alloys Gate valves are not intended for throttling administration. Drawn out use in the incompletely vacant position will for the most part harm seating surfaces. Gate valves are accessible with various wedge arrangements (solid, flexible and split) to best meet the particular administration conditions. Gate valves typically are hand wheel worked, but on the other hand are accessible with adapting, electric engine actuators, or barrel (pneumatic or hydraulic) actuators for remote operation.

• Design: API 600/ ASME B 16.34
• Face to Face: ASME B 16.10
• Flanges: ASME B 16.5
• Butt welding: ASME B 16.25
• Testing: API 598 / EN 12266 PART 1 & 2

Neelcon Steel offer a wide selection of Pressure Seal Valves Stockist Mumbai (Maharashtra) India. Neelcon Steel Wholesale Various High Quality Pressure Seal Valves in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania

We are offering gate valves. Cs/ss gate valves # 150 / # 300 / # 600 flanged connections.

• Features: Fine finish , High quality , Durable

• Size: 1/2" to 3"
• Connection: Flanged Flat Face
• Structure: Bolted Body, Integral Seat
• Trim: 316 Trim
• Pressure Raiting: 0 to 13 BAR
• Applicable temperature: -196 - 593 Deg. C.

We are leading Industrial Gate Valves manufacturers & Industrial Gate Valves Suppliers in India. Standard BS:1414. API 600 Bolted bonnet, outside screw and yoke type Rising / non rising stem, hand wheel operated, back seat Arrangement, self aligning type. Screwed in bottom seated body seat rings, solid wedge, wedge guided in the body. Available in Class 150 & 300 stellited seating surface on requirement. Size available 1/2" to 12".

Gate Valves are largely designed to start or stop a flow when a straight line flow of fluid and minimum flow restriction are needed. In service, these gate valves are pretty much kept either fully open, or fully closed. Gate valves are primarily made up to start or stop a flow when a straight line flow of fluid and minimum flow restriction is needed. In service, these Gate Valves are pretty much kept either fully open, or fully closed. When turned open, the disc of the gate is completely removed allowing materials to pass. This gives the gate valve good shut-off property and allows it a bidirectional movement. They cannot be quickly blocked or unblocked. The Gate Valves shakes when it is blocked. Swastik Industries Steel Gate Valves have been designed to meet the requirements of API 600 BS 1414 API 603 API 6D ASME B 16.34, The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position.

• Size: 15mm to 200 mm

Material Of Construction - Gun Metal also available in Stainless steel/Cast Iron/Cast Steel/Aluminium Bronze/Brass. End Connection - Screwed ( BSP/NPT) and Flanged  Tested at 35 Kg/cm2(500 lbs)

• Brand Name: J.P.Metals
• Size: As per requirment
• Color: As per requirment
• Feature: As per requirment
• Material: As per requirment
• Model: As per requirment

• Type: Bolted Bonnet O. S. & Y Type Rising Stem
• Pressure Rating: ASA 125#, 150#, 300#, 600#, 900#, 1500#, 2500#
• End Connection: Screwed to BSP, BSPT, NPT, Socket Weld, Flanged Ends, Ring Type Joints(RTJ), Butt Welded as per ANSI B 16.5 / B 16.25
• Size: 25mm to 1000mm
• Design & Mfg. Standard: API 600, API 6D, MSS SP-81, BS 1414
• Inspection & Testing Standard: API 598
• Body Material: WCB, Cast Iron, CF8, CF8M, CS, SS, AS, LCB, WC6, WC9, Alloy 20
• Trim Materials: 13% Cr. Stellited, AISI 304/316/Monel
• Face to Face Dimension: ANSI B 16.10

Gate Valve / Knife Gate Valve are a mechanism which consists of a circular gate, which on rotating allows liquid flow. Nakshatra Steel & Alloys is a renowned Gate Valve Manufacture & Supplier in the contemporary market. For the great demand of our products, we always maintain sufficient quantity of Gate Valves Stock. The exceptional Gate Valve Properties attract more number of customers towards us. Being an eminent Knife Gate Valve Supplier, we always maintain friendly relations with all of our clientele. Features and prices of all of our products can be noticed in our Knife Gate Valve Stock list. We contribute all of our goods at economical market prices. As per the industrial requirements of our customers, we design our mechanisms with appropriate Gate Valve / Knife Gate Valve Specifications. We enhance the properties of ourStainless Steel Gate Valves by adding small quantities of special chemical elements. Our Alloy Steel Gate Valves are a combo of components like Molybdenum, Silicon, Chromium, Boron, Vanadium, and Nickel. Our Aluminium Knife Gate Valves and Brass Knife Gate Valves are noted for their ease, durability, and flexibility. We properly train our employment personnel to use modern techniques while designing Bronze Knife Gate Valves. All the properties and features of our products are perfectly showcased. Choose the product of your choice, and place your order right now. In case of any queries, feel free toget in touch with us!

• Size: 1/2" - 2"
• Material: FS & SS

These are available either with Treaded or Socket Weld ends. Hard Faced Trim material ensures perfect Sealing and long life. Perfectly machined and Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition, ensures maximum safety, convenience and economy.

Ksb Boiler Valves IBR, Joint Sheets , Gland & Teflon Packing , Brake Liner, Molykote Grease , Loctite Sealent