Lab Incubator Dealers in Kanchpada, Mumbai

CO2 incubators are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, in vitro fertilization, neuroscience, cancer research and other mammalian cell research.Sleek, reliable and intuitive, Esco CelCulture CO2 incubators provide all-rounded sample protection that brings your scientific dreams one step closer to reality.   Features VivoCell™ Precise Temperature, CO2 Control and High Humidity   Best uniformity and control among competition Fast CO2, temperature and humidity recovery without overshoot Direct heat design for rapid recovery, with 8 heater grouped into 3 zones Air jacket provides isolation against ambient temperature fluctuations VentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination Filtered air circulates across water pan to accelerate humidifying process Air flows gently around culture plates, causing no disturbance to cell culture Blower automatically stops when door is opened, to minimize mixing of chamber and room air CelSafe™ Contamination Control System Provides Seamless Protection SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 condition. SwiftCon™ moist heat 90oC decontamination cycle operates overnight to eradicate any contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use. All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants. The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE antimicrobial coating. The interior of the chamber is made from stainless steel type 304. User-friendly software interface Comprehensive user-configurable alarms for all the parameters. CelAlert™ alarm system reminds user to replace CO2 tank and ULPA filter. Intelligent data and event logger records all incubator parameters for on screen recall. 16 MB built-in flash memory guarantees long term storage of data. Diagnostic interface and on line quick help provide comprehensive solutions to frequently. encountered problems. RS485 data output. Easy-to-Clean Chamber is made of shiny stainless steel chamber with all rounded corners. Ductwork, plenums and shelves are removable without tools. Glass door is removable without tools. Inner gasket removable without tools. Easy-to-Service Diagnostic functions in the microprocessor include historical read-out of the parameters. Service can be carried out from the top/front Esco electronics and sensors have been expertly designed and paired to be inherently drift-free, to minimize need for calibration Low service costs.

Our company has specialized in the sphere of fabricating a wide range of Memmert Incubators that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubators as per the requirement of Clients. Technical Specifications: Triple walled Unit Inner chamber made of S.S.304 Outer chamber of Mild Steel with Powder coating Gap Between the two walls filled with glass wool insulation to avoid heat loses of 65 mm Heating element Are Made of high grade chrome plated nichrome wire Heaters are placed ate the right & left side of the inner chamber Enable with thermostat control the Temperature Temp. Range 5 C above ambient to 60 C accuracy ±2 C Air Ventilation is placed on top of both sides to remove heat gases and fumes Control Switch & pilot lamps are fitted on front panel Supplied with G.I. Wire mesh Jali

KBI Range of Incubators allow efficient and economical general incubation work and temperature testing according to international Test Standards. They are outstanding in precision and reliability as well as in performance and styling.   Construction and mode of operation: • Cabinet, double walled, exterior finished in powder coating epoxy paint. Door, right hand hinge, with magnetic gasket and lock, full length plexi-glass inner door.   • Insulated with the most efficient insulation available today, provided for improved refrigeration performance.   • Forced air circulation through built-in large size fan via baffle plates, gives constant positive air flow throughout the chamber, as well as fast adjustment of the specimen to circulating air temperature.   • Air Tempering is carried out by a finned heater and finned tube heat exchanger cooled by hermetic compressor.   • Control Panel carrying all the controls, indicators, switches, heat energy regulator etc. Is placed on the top of the cabinet.   Controlling and Regulating: • Digital Display of actual value and set value with 0.1ºC Resolution allows exact control of temperature and repeatable setting of the same temperature value. The temperature in the chamber is measured with a high precision PT - 100 sensor.   Controller: • The fully electronic temperature controller with two point sensors automatically select cooling or heating. It gives very high precision and an excellent response due to the built-in feed back.   KBL Range of B.O.D. Incubators have additionally built-in illumination system comprising four 2 ft. Fluorescent tube lights housed vertically in the door and 24 hrs. ON/OFF cyclic timer for illumination control. Additional Features: • Automatic chamber light on opening of the door   Performance Specifications:  • Controllable range of Incubator temperature ; 5 to 60ºC • Accuracy of temperature control :±0.5ºC • Temperature variation throughout the cabinet : ±0.5ºC     Performance Specifications:  • 230V , single phase, 50 Hz.   OPTIONAL: • Illumination system using flourescent tube lights for KBI models. • Programmable 24 Hrs. On/Off cyclic Timer for illumination control for KBI Models. • Electrical point inside the chamber. • Port holes for glass inlet. • Luxmeter.

• Color: Stainless Steel GMP Model
• Name: Orbital Shaking Incubator
• MOQ: 1 Nos

Orbital Shaking Incubator

• Application: Storing Blood Platelets
• Brand Name: TRUFROST
• Model: MDC 10
• Sterility: UV
• Size: 432 x 462 x 728mm
• Number of Shelves: 10 Shelves
• Exterior Dimensions (W*D*H/mm): 522*600*1300
• Temp. Range (°C): 20

Key Features: High accuracy sensor Microprocessor control with inner temperature controlled at 22°C +/-2°C Efficient refrigeration system with controlled fan and forced cycle mechanism ensures temperature consistency inside the cabinet Large digital display for easier observation Disinfection by UV light that shuts off automatically when door is opened to prevent harm to human body Double insulated glass door makes observation easy High quality oscillation slide rail for longevity as well as low noise Safety Control System: Alarm mode monitors ambient temperature and system state to ensure safety and reliability of storage conditions. High/Low temperature alarm, thermostat malfunction alarm, power failure alarm in 72 hours, battery back-up malfunction alarm and door ajar alarm Audio and visual alarm

We are one of the most reputed Manufacturers, Exporters and Suppliers of BOD Incubator in the market. Primarily designed to meet the requirement of Biochemical Oxygen Demand Test, the BOD Incubator can be used in various applications like Incubation, Serum Studies, Study of Enzymatic Digestion Processes, Tissue Culture, Preservation of Vaccines, Long Term Sample Immunological work, etc. The BOD Incubator that we provide is developed and designed by using the best quality components and parts. Our BOD Incubator is well appreciated for its excellent control and smooth functioning. Calibration & Validation We will provide the calibration certificate of the controller with trace ability of the Indian government�s approved agency. The company also does the validation of the chamber i.e. recording the temperature at different places in the chamber confirming uniform temperature throughout the chamber & no developing of hot & cold zones in the chamber. Construction The Inner chamber of the cabinet will be made up of Stainless steel & the outer wall will be of Mild steel sheet that is insulated between the two walls of 75-mm thick special quality Glass wool pad to prevent thermal losses. A self-cooled air circulation fan will be provided to maintain the uniform Temperature throughout the Chamber. Door construction A flush fitting insulated door has leak proof Magnetic Gasket with Lock & Key wears as Full-length inner door of acrylic, which allows a clear view of samples without loss of chamber condition during operation. Trays : Adjustable Perforated removable Stainless Steel shelves are provided along with the unit Circulation : Forced air circulation throughout the chamber for uniformity & accuracy Heating : Long Lasting stainless steel tubular heater is been used as heating element Heating element of Nichrome wire placed in air path duly insulated from body. Cooling A hermetically sealed compressor with evaporating coil & fan-cooled condenser provides efficient cooling in the chamber. The compressor is safeguard with time delay circuit & overload protection. The cooling system is placed at the bottom of the working chamber for easy servicing & for low noise vibration. Temperature sensing device : Temperature of the chamber can be sensed by Pt � 100 A Class sensors Control Panel The control panel will be on the top of the unit for easy setting of the temperature it will consist of P.I.D Based Digital Temperature Controller with Line, Mains, Cooling, Heating L.E.D. Bulbs & Push On / Off Button for inner chamber Illumination Temperature range : - +5o C to +50oC Accuracy : - + 1o C

The company is a Manufacturer, Supplier and Exporter of BOD Incubator. BOD Incubator is inbuilt with energy saving devices. BOD Incubator has chamber heater and compressor in it which are controlled through microcontroller which in turn is connected to PID controller. BOD Incubator comes with stainless steel shelf which can be easily removed for cleaning. We supply BOD Incubator in different parts of the world. Standard Features CFC Free Refrigeration systemMicrocontroller based controller with data loggingAlarms for temperature deviationSafety devised for temperature overshoots / undershootsDocumentation Support, IQ OQ and PQ protocolsDigital display improved visibility, with 0.1 degree C resolution for accurate measurementInterior made of stainless steel & exterior made of either powder coated steel or stainless steel traysCalibration certificatePrinter interface for direct printingData Aquisition software smart -DAQWire mesh stainless steel traysInner full length glass door & outer lockable metal door Forced air Convection Continuous forced air circulation provides maximum uniformity, there for same testing results throughout the chamber. Uniform distribution is provided in entire range of incubator.Stainless steel shelf system is removed easily without using tools for easy cleaning.

• Precise Control Accuracy: ±0.5° C.
• Best uniformity of Temperature: ±1.0° C.
• Models: NEPL 101S,NEPL 102S,NEPL 103S,NEPL 105S etc.

Double walled interior and exterior S.S 304 with matt finish insulated with high grade rock wool insulation.Full Length Inner Glass Door with Lockable outer Metal Door.All operations through a single PID controller with 2-line LED display.S.S. Perforated Trays with adjustable Runners.Forced air circulation for uniform temperature

B.O.D. stands for Bacteriological Oxygen Demand. NEWTRONIC's BOD Incubators are ideal for the growth & storage of bacterial cultures, gentle incubation & conditioning and Media Preparation.Media Prepartion & Culture growth at temperatures of 22.5°C (±2.5°C) & 32.5°C (±2.5°C) have become a standard practice in any Microbiology or ARD labs.The chambers ensure consistent performance at any temperature within a range of 5°C to 60°C at an accuracy of ±0.5°C & at an uniformity of ±1°C.The chambers are provided with a glass door for sample viewing & quick retrieval. They are connected through Ethernet to state-of-the-art 21 CFR Part 11 ready software that provide tools for viewing, trending, alarm management, audit trails, MKT & many other such features so as to comply with regulatory guidelines.

“Lab Care” makes Orbital Shaking Incubators are designed and fabricated to suit various I.S. Standards to orbital or reciprocating shaking motion application in the growing field of medical, agricultural,industrial, Research laboratories and hospitals Features: Temperature 5 Deg C. to 60 Deg C. Time Proportionate digital temperature controller with an accuracy of +- 0.5 deg C. shaking with the help of DC Drive and Brush less motor, having Eccentric pulley machanism

Infant Incubators This is why infant incubators must be bought from the best manufacturers possible; people who guarantee quality and service. However, the manufacture of such sensitive electrical equipment has to be scrutinized intensively.

We offer biochemical oxygen demand incubator.we deals in manufacturing, supplying and exporting of biochemical oxygen demand incubator. Biochemical oxygen demand incubator is fabricated in a double decker type construction.

lab incubators, Cooling Incubators, Deep Freezers, Humidity Chambers

Walk-in Incubators, Photostability Chamber, Walk-in Chamber

medical incubator, Anesthesia Machine, Autoclave, blood bank fridge

Bod Incubator, low temp constant temp water bath, bacterioriologial incubator