Laboratory Analyzer Dealers in Mumbai

DhwaniAurica impedance analyser Manufacturers, Suppliers in Mumbai, India. Expertise for hearing aid machine, portable spirometer, Hearing Solutions, clinical information, hearing disabilities, alps hearing aids, hearing aids, Cheap hearing aids, digital hearing machine, hearing machine for deaf, hearing machines, hearing aid in Mumbai, digital hearing aids, invisible hearing aids, cost of hearing aids, hearing devices, ear aid, elder care products, digital ear machine, tympanometer, pure tone audiometry, newborn hearing screening, diagnostic audiometer, triveni audiometer, digital audiometer, screening audiometer are located at Borivali (west), Mumbai, India. www.Dhwaniaurica.com.

• Temp.: 10 to 29 °C
• Weight: 950 g

Online ConductivityTDS Analyzer having the Right Features To Measure, Analyze And Control Conductivity, TDS And Temperature, 3 programmable onoff relays: 2 for conductivity and 1 for temperature.Accepts 2-wire or 4-wire conductivity cells for K=0.1, K=1 and K=10 cell constants for improved flexibility and accuracy.Displays 3 selectable conductivity and TDS ranges per cell constant for a total of 18 ranges.

• Time: Intrinsic O-C time, in-phase state and corresponding period, and phase to phase synchronization of 12 fractures.
• Closing Resistance: Pre-contact time, pre-contact waveform and resistance of closing resistance of six breaks.
• Reclosing: The process time of ‘C-O’, ‘O-C’, ‘O-C-O’, first opening time, first closing time, second closing time, contact time and no-current time value.
• Bounce: Switch on bouncing time, bouncing times, bouncing process and bouncing waveform of each break, switch off rebound amplitude of each break.
• Speed: Instantaneous opening speed and instantaneous closing speed, maximum speed, time-travel characteristics curve
• Travel: Total travel, open distance, over travel, overshoot travel, rebound amplitude.
• Current: ‘O-C’ current of O-C coils, current oscillogram.
• Output Power: DC 30,250 V/20A of digitally regulated operating power supply for circuit breaker is supplied by the tester and test of low-pressure operating is completed automatically to measure the operating voltage of circuit breaker.
• CURRENT measuring range: 20.00A with resolution of 0.01A
• OUTPUT POWER SUPPLY: DC 30?250 V/20A digital adjustable/20A [Instantaneous working]
• Environment: Temp-10?40 C
• Humidity: less than 80% RH
• Input power supply: 230V ± 10%, 50 Hz ± 10%
• TIME MEASUREMENT RANGE: 4000.0 ms with resolution of 0.1 ms
• ERROR: Within 100 ms, 0.1ms ± 1 byte
• Above 100 ms: 0.1 % ± 1 byte
• Synchronization: ± 0.1ms
• SPEED MEASUREMENT RANGE: 20.00 m/s with resolution of 0.01 m/s
• ERROR: Within 0-2 m/s ± 0.1m/s ± 1 byte,Above 2 m/s ± 0.1m/s ± 2 byte

The Model CA 2000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters. It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault", Custom designed sample conditioning system Application specific principle of Analysis Infrared & Electrochemical detector for CO and C02 & NOx, HC. Electrochemical/paramagnetic or zirconia detector for 0 Hydrocarbons & Hydrogen Heated stack mounted filter optional Automatic calibration Built in printer. (Optional) Multipoint sampling system. (Optional) RS-232/485 output for data. logging and further analysis.(Optional)

• Usage/Application: Laboratory Use
• Model Name/Number: Zurich MFIA 500khz 5Mhz
• Brand: Zurich
• Frequency: DC - 500 kHz,60 MSa/s,16 bits,Optional upgrade to 5 MHz
• Inputs: Current and differential voltage inputs
• Operation: AC line and DC supply (battery) operation
• Conections: USB 2.0 and 1 GbE high-speed connections
• Tool Set: Lab One tools et including Scope,Sweeper,and Spectrum Analyzer
• Dimensions: 11.1 x 9.2 x 4 inch
• Weight: 3.8kg
• Interface: USB 2.0,LAN 1GbE
• Test Signal Level: 0 V to 2.1 Vrms; incl. monitoring
• Demodulator Bandwidth: 276 uHz to 206 kHz
• Features: Optional upgrade to 5 MHz, 0.05% basic accuracy, Compensation Advisor and Confidence Indicator, Full MFLI Lock-in Amplifier functionality

Provides reliable and accurate test results in noisy high voltage substations.Four standard models. Full stand-alone functionality or data acquisition models without user interface.Fast and safer with DualGround™ testing, both sides of breaker grounded.On-screen assistance with connection diagrams and test template wizardAll models can be controlled via computer.The TM1700 series Circuit Breaker Testing Set utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All models can be controlled from a computer using the well proven data management and analysing software CABA Win.The robust design offers powerful technology that assists the user to achieve efficient and reliable circuit breaker testing. All inputs and outputs on the instrument are designed to withstand the challenging environment in high-voltage substations and industrial environments. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections.

We offer high-end laboratory unit for temperature-stabilized measurement of water activity in the foodstuffs, cosmetics, or pharmaceutical industries.

Applications include: Total sulfites in foods, dissolved SO2and H2S in amine scrubbing solutions, and sulfites in geological materials and wallboard.   The CM440 Total Sulfite, SO2/H2S Analyzer is a complete analytical system allowing the direct measurement of total sulfites or dissolved SO2/H2S in a wide variety of sample matrices and concentrations. Combining a automated, self-contained unit for the acidification of a sample (to evolve SO2 and/or H2S), with a highly sensitive SO2/H2S detector, the CM440 easily handles solid or liquid samples with concentrations from ppm levels to 100% without user calibration. UIC’s analyzers are rugged, accurate and adaptable to most applications. They are used extensively in industrial, research and educational laboratories worldwide. The CM440 system includes the following components pictured above:   CM5014S SO2 Analyzer   No user calibration Wide, linear dynamic range Readability to 0.01 µg Sulfur User selectable display units Floppy disk drive for archiving data   Instrument Capabilities A major advantage of the CM440 Total Sulfite, SO2/H2S Analyzer is the use of coulometric detection. Employing the principles of Faraday’s Law, the CM5014S SO2/H2S Analyzer automatically measures the absolute mass amount of sulfur dioxide and/or hydrogen sulfide evolved from an acidified sample. No user-calibration is required and linear detection is available from less than 1 µg sulfur to over 10,000 µg sulfur. Using this 100% efficient coulometric process, relative standard deviations of 0.2% or better are common for standard material. For smaller concentrations, an absolute deviation of approximately 1 µg S is typical.

• Features: Highest -Resolution in Zeta Potential Analysis: 0.1 mV, Dip cell technology to avoid electro osmosis, contamination etc, Detector: Avalanche Photodiode (APD)
• Applications: Formulation Stability, Liposome’s and Bio-Colloids, Nanoparticle Aggregation, Emulsion Dispersion

Technical Data • Parameters: pH, Nitrite, Specific Gravity, Ascorbic Acid, Blood, Glucose, Bilirubin, Urobilinogen, 　　　　　　　   Ketone, Leucocytes, Protein,Calcinm, Creatinine, Microalbumin• Principle: dual-wavelength reflectance photometry• Two test modes: Normal mode, 60 samples/hour ,Continuous mode, 120 samples/hour• Memory capacity:1000 results• Strip: Uritest 10A/11A urine reagent strips• Dimension: 290mm x 200mm x 100mm　 Features & Functions• Cold light source facility with long life and high stability • 12V DC power supply by the adapter • Built-in thermal printer & port for an external printer• Two test modes and speeds for selection• Data transfer capability via RS232 port• Barcode reader optionalMicroalbumin• Forecast the diabetic nephropathy and early detection• Reach the sensitivity of 50mg/L with the 85% accuracy• The best supplement for the test of protein

1MHz to 300MHz Measurement Frequency at High Speeds with Superior Repeatability.

The backbone of the Nicomp DLS is a high-resolution,multi-modal deconvolution algorithm that resolves close bi-modal distributions — and can even separate a nanomaterial’s native peak from its aggregate tail. This is essential for developing and classifying nanoparticles and determining colloidal stability, as you’ll see in the real-life examples to the right..

• Power Supply: 110-230VDC +/- 20% OR 12V-30VDC
• Response Time: Less than 10 sec
• Sensor Life: 5 year minimum
• Indication Range: 1 ppm - 1000 ppm
• Detection Level: Adjustable in step of 100ppm by remote control
• Operating Temperature: 0-50 Degree C

We are leading supplier of high resolution ZETA POTENTIAL ANALYSER based on Laser Doppler Electrophoresis (LDE) from nano to micro particles zetametry using video tracking. Zeta Potential Analysis by streaming potential,Electro-kinetic Analyse using porous plug technique.  

Description :- Advanced battery analyzers are largely used in the automobile industry to restore and increase the life of batteries used in vehicles. The advanced battery analyzers are responsible for cycling, rapid testing and boosting of automobile batteries. Applications:Advanced battery analyzers are commonly used in the following areas: Automobile Industry Medical Equipment Defense Cell Phones

• Brand Name: HAL TECHNOLOGY
• Model Name/Number: MCSA-16K
• specification: Variable Channels up to 16K,Fast Response,USB interface and real time data acquisitions,Pulse monitoring and measurement in time domain,No power supply needed

Advanced battery analyzers are largely used in the automobile industry to restore and increase the life of batteries used in vehicles. The advanced battery analyzers are responsible for cycling, rapid testing and boosting of automobile batteries. Applications:Advanced battery analyzers are commonly used in the following areas: Automobile Industry Medical Equipment Defense Cell Phones

• Voltage: 12 V
• Features: Measure battery voltage and capacity, Powered by the battery under test—no need for an external power supply, Rugged housing with durable Kelvin clamps, Easily portable.

The TM1700 series Circuit Breaker Testing Set utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All models can be controlled from a computer using the well proven data management and analysing software CABA Win. The robust design offers powerful technology that assists the user to achieve efficient and reliable circuit breaker testing. All inputs and outputs on the instrument are designed to withstand the challenging environment in high-voltage substations and industrial environments. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections.

• Voltage: 220V
• Frequency: 50Hz
• Usage: Auto Testing Machine
• Time Range: 4000.0ms
• Input Power: 220V
• Atmospheric Pressure: 106kpa Degree Celcius

• Voltage: 230 V
• Weight: 1 Kg
• Features: • Compact, fully automated, open random-access analyzer.Upto 200 tests/hour throughput (without ISE), Minimum reaction volume: 210 μl, Minimal < 1L/h water consumption
• Usage/Application: Laboratory Use
• Operation Mode: Automatic
• Brand Name: Accurex
• Frequency: 50 hz
• Power Source: Electric

Open system Single Channel Coagulation analyzer Dual Detection Principle Half volume reagent Automatic starting and stopping timer Continuous mixing with stirrer  rod Automatically calculates INR Stores Calibration Curves with up to 9 points

• Feature: Versatile probes for accuarte chemical concentration control,Highest accuracy at very low to medium conductivities,Compliance through certification package
• Usage/Application: Laboratory Use
• Brand: METTLER TOLEDO
• Color: Multi
• Material: Stainless Steel 1.4435 (316L)
• Sensor element: Platinum and ceramic
• Process temperature: -5 to 120C (140C/ 1h) 20 to 250 F ( 284F/1h)

We are one of the prominent manufacturers & exporters of Battery Analyzer from India.

Battery Analyzer, Batteries, Battery Packs, battery testing equipments

Circuit Breaker Analyser, power meters, Battery Tester, Cable Fault Locator

circuit breaker analyzer, Contact Resistance Meter

multi channel analyzer, Detector, ionization chamber, trigger generator

Laboratory TOC Analyzer, Blue N White Gemini Oxygen Generators