Laboratory Apparatus Dealers in Andheri East, Mumbai

• Application: Laboratory
• Color: Available in various Colors

Features Certified CE, ISO 9001, ISO 14001 Obtained GD, QD Mark (Good Design, Qualified Design) Auto regular recycling every hour Standby function : Auto recyclinglower than setting value. Programmable by 2 steps for the filter exchanges to maintain water quality. 254/185 UV lamp MW 5000 UF filter PVDF 1/4 Dispensing gun   Included Filter & Accessories : Prefilter, Super A/C Filter, RO Pack, Power UP Pack, Level Sensor, Manul, Hand Lever, Power cord   Optional Accessories : PVDF1/4 Dispensing gun, Pretreatment system, Low pressure valve, Wallmounting bracket, Frame, Water Tank, Vent Filter.

• Application: Medical Use
• Driven Type: Electric
• Automation Grade: Semi Automatic
• Machine Type: Digital
• Frequency: 50/60 Hz
• Printing Mode: Manual, Auto

• Machine Type: Resting
• Automation Grade: Automatic
• Voltage: 415 V
• Brand Name: Contec
• Power: Electric
• Country of Origin: Made in India
• Model Name/Number: 8000S
• Frequency: 50 Hz
• Display Type: LED

• Country of Origin: Worldwide
• Certification: CE Certified, ISO 9001:2008
• Application: Heat Use
• Weight: 10-20kg, 30-40kg
• Color: Brown, Grey, Silver
• Voltage: 220V
• Condition: New
• Capacity: 20L/Hr, 60L/Hr
• Power: 100-200W, 400-800W, 800-1600W
• Driven Type: Electric, Solar
• Warranty: 5yrs
• Automation Grade: Automatic, Fully Automatic
• Ambient: 0-180 Deg C 180-360 Deg C
• Color: Grey
• Product: Brand new
• Usage: 567

Aperture Shape: Roudn, Square, Grater, Design:c.GMP Quality. Special Sieves : For handling very hard material, sticky material & high loads. Sieves suitable for various all International manufacturers like Alexanderwerks, Gerteis & Indian Machine Manufacturers. Sieves can be tailor made to your specificatons. *Alexanderwerks, Gerteis are not in anyway affiliated with Filter Woven India

• Country of Origin: Made in India
• Power: 1 kW
• Brand Name: PCM
• Display: Digital
• Body Material: SS
• Weight: 45 kg
• Speed: 650 RPM
• Stirrer Depth Adjustment: 25 mm
• Frequency: 50 Hz
• Glass Beakers: 6
• Usage: Laboratory

BATCH FRACTIONAL DISTILLATION UNITFUNCTIONTo  fractionally distil multi-component mixtures under atmospheric pressure as well as under reduced pressures with high efficiency.CAPACITY 50 Ltrs.  To 5000 Ltrs. Reboiler with 5 to 30 theoretical stages.SALIENT FEATURESThe reboiler is provided with a mechanical agitator to accomplish uniform boil up of the mixture without localized heating and hence avoiding thermal shocks. Controlled heating facility ensures fairly uniform boil-up rates and avoids over  heating. Highly efficient structured packing provides a low HETP and low-pressure drop across the column. The unique reflux distribution system with control panel and adjustable program ensures high efficiency of separation. The design of condenser ensures low- pressure drop across it. The appropriate design of the subcooler ensures the entire material to be subcooled to the desired temperature before it is withdrawn. The vacating facility provided ensures easy removal of the distillate without disturbing the vacuum of the system . The vacuum manifold provides a unique feature where the column can be switched over to any vacuum pump at any time. Adequate vapour traps provided to ensure complete trapping of the uncondensed vapours thereby preventing the vapurs from entering the vacuum pumps. The entire column and assembly is provided with specially  machined flanges, appropriates gaskets and leak proof accessories to ensure almost zero leaks.

Incorporated with maintenance free Dispenser.No Refilling is necessary after every titration.Several titrations can be carried out uninterruptedly.Average factor calculation facility.Results are Automatically Calculated in Percentage, PPM and mg of H2O.Inbuilt volume validation facility.Equipped with inbuilt volume validation facility.RS 232 Interface for PC to download the data.Three User Level based functionality: Admin, Manager and Operator.

Vertical Height Adjustment up to 250 mm (Normal Distance 180 mm) Horizontal Distance Adjustment from 150 mm to 250 mm (Normal Distance 180 mm) Spring Constant: 25 N / mm Motorized arrangement to adjust dropping height = 40 mm Digital pre-counter is provided to count the number of drops

We are offering Stainless Steel Strainer-10.

Heat Transfer from a Pin-Fin Apparatus TLF005 Study of Temperature distribution along the Length of Fin in both Natural & Forced Convection Comparison of theoretical Temperature distribution with experimentally obtained distribution Comparison of performance of Fins of various materials.

Lab water purification system storage tank is then re-circulated in a closed loop to various user points with the following features.Dished ends at bottom for complete drainability and at top to avoid stagnation.

Our company wouldnt be where it is today but for the dedication and passion of our people united by a strong set of values.

Wesmec engineering pvt ltd is offering laboratory apparatus in india, these are specially designed to ensure maximum safety and ease of use.

• Material: Plastic
• Country of Origin: Made in India
• Usability: Reusable
• Brand Name: Shalya
• Usage/Application: Laparoscopic Surgery
• Is It Water Proof: Yes
• Color: Black

Gas Sampling Bombs that are specially designed to collect and store high pressure gas samples from the field & transport the same to laboratories. Superior in quality, these bottles pass through rigorous quality control tests and inspections to ensure maximum integrity and cleaning process for effective corrosion resistance. Designed as per exact industry standards and guidelines, the gas sampling bottles are available in different sizes and specifications.  Application: Sampling Bombs permit the extraction of a sample from a remote process location and provide safe containment for storage and transportation to the laboratory for analysis. These cylinders are rated to 1800 psi at room temperature for liquids and gases. Some applications include hydrocarbon sampling in refineries, gas sampling in chromatography and condensate sampling in fossil-fuel and nuclear power plants. In similar applications, petrochemical facilities and gas processing plants utilize sample cylinders. Pressure surge accumulators or reaction vessels are other common uses for sample cylinders.

The Ultrasonic Atomiser uses Ultrasonic energy (Low/Medium) to generate low velocity, gentle spray unlike the conventional atomizing nozzle which depends on pressure & high velocity motion to shear a fluid into small droplets. The fluid (Liquid) is dispensed to the atomizing probe by either gravity or low-pressure small pumps & atomize continuously or intermittently as per requirement. The sample can be accurately delivered to the target area & over spray is virtually eliminated thus, resulting in material savings. The atomizer can runs continuously or be programmed to pulse On & Off. The rate of atomization depends within limits solely on the volume that is been delivered onto the atomizing surface & the frequency it operates. Typically higher the frequency, the lower the processing capability. With water the average droplet size is 50 microns and the minimum sample volume that can be effectively atomized is 2µl/sec. To optimize atomization, the viscosity below 50cps & solid concentration must be below 30%. The atomization of liquids containing long-chained polymer molecules is problematic, even in diluted form, due to highly cohesive nature of the material. Drop size is primarily a function of frequency, and the higher the frequency, the smaller the drop diameter, E.g. : frequency 20 kHz the drop size is 100 microns & frequency is 40 KHz the drop size is 50 microns. HOW DOES IT WORKS? The Ultrasonic power supply converts 50/60 Hz to frequency electrical energy. This electrical energy is transmitted to the piezoelectric transducer within the converter, where it is changed to mechanical vibrations. The ultrasonic vibrations are intensified by the probe and focused at the tip where the atomization takes place. The liquid travels through the probe, and spreads out as a thin film on the atomizing surface. The oscillating tip disintegrates the liquid into micro-droplets, and ejects them to form a gentle, low velocity spray. SUMMARY OF FEATURES OF ULTRASONIC ATOMIZER From micro-litres to litres – continuous or intermittent Dispenses material with virtually no over spray Pressure-less atomization – low velocity mist Low cost atomization probe replacement Minimal atmospheric contamination Virtually unclog gable Programmable operation Multiple probe operation No heating / No temperature rise   TYPICAL APPLICATIONS Increase of humidity level Coating non-woven fabric, paper, etc… Laboratory spray drying Injection moisture into a gas stream Applying minute amount of oil, fragrance or flavour onto a product Injecting small volume of reagents into a reactor

  VIKING™ offers a range of hoods made from rubber, neoprene or smoothskin materials. These may be attached to suits or sold as accessories such as semi dry hoods.

• segregation: 8” / 10” / 18” / 24”

Filtering Sieve made with Joint Less Brass or Stainless Steel frame, with wide range of materials, sizes, shapes, microns & configurations used for evaporation, absorption, filteration or segregation, in mainly 8” 10” 18” 24” dia or as per customers requirements.

The distillation column designed to separate a homogenous mixture into its respective components. The highly efficient fractional distillation column can be designed in both standard and customized specifications. Fractional distillation is one of the highly efficient and accurate methods of distillation that has been used in industries since long back.

• Color: Transparent
• Type: Glass Distillation Assembly
• Country of Origin: India
• Application: Chemical Laboratory
• Packaging Type: Box
• Deals In: New Only

Unique Features : Extremely Compact Construction Long Lasting Vacuum Pump Polycarbonate Vacuum Dessicator Stainless Steel (GMP) Construction           Vacuum Level now Upto 25” of Hg It’s the most ideal “ LEAK TEST” instrument for checking Blister Packs, Strips and Pouches. It makes the conventional dessicator with a huge vacuum pump, obsolete. The Vacuum Pump ensure that a high level of vacuum is created in the shortest possible time. And the die-pressed, polycarbonate vacuum dessicator sustains the vacuum for a long time. A vacuum gauge is provided to indicate the vacuum level. This is connected to the isolation valve which helps disconnect the source, thereby avoiding the need for running the vacuum pump continuously. While it’s amazing compactness saves valuable space in process laboratories and timer helps the operator attend to other chores at a time.

The HDT/VSP instrument is used for determining the deflection temperature limit for specific application and comparing the heat softening characteristics of thermoplastic material at a constant load in oil upto 300 Deg. Co.cPlastic materials being heat sensitive in nature has a lot of bearing on its thermal environment for it's performance. Though their behaviour in thermal conditions is very complex some simple yeild tests are used to predict it's behaviour and performance in a given condition. "VICAT SOFTENING POINT" or "HEAT DISTORTION TEMPERATURE" is one of such yeild points very commonly employed with such demanding applications. Vicat test consist of penetrating a unit size indentor in a plastic surface with predefind load under constant rate of environmental temperaturerise. Heat distorsion test, as it is sometimes called, consistes of deflecting a simply supported beam of test material under similar heating conditions & with a predefined stress application.HDTTest for deflection temperature of plastics under flexural load. Heat distoration temp. is the temp. At which a sample deflacts by 0.1 inch. (2.5 mm). Standart test methods: ASTM D648, BS 2782 method 102, ISO R75.VSTVicat softening point is the temperature at which the needle penetrates 1 mm into the sample. Standard test methods : ASTM D1525, BS 2782 method 102D, ISO R306.  

Description :-Comprises a shallow glass dish 100x10mm & a pair of socket terminals/ electrode holders that clip onto its rim. A compliments of six electrodes is supplied, two point source, two line source & two circular rings of 70mm & 35mm diameter respectively.

Various types of strainers like Y type, T type, Conical Temporary type, Basket type are available in various sizes and material of construction in fabricated and cast constructions. These pipeline strainers are designed as per free flow area and pressure drop allowance calculations as required for the application. They can be supplied with wedge wire element or perforated sheet with wire mesh.

biomedical instruments, Medical Equipment

chromatography equipment, Laboratory Chemicals, Laboratory Instruments

• CAPACITY: 100 to 10000 Ltrs

Design as per ASME guideline and user requirement. No stagnant point to avoid bacterial growth. Electro polish from inside. Insulation with SS 304 welded cladding. All contact parts will be of SS 316 SS 316 L quality. 0.2 µ Hydrophobic Air vent filter for Air venting.Vessel is CIPSIP able. Capacitance type level indicator for water level. Sanitizable pump for loop & recirculation.