Laboratory Apparatus Dealers in Lbs Marg, Mumbai

• Country of Origin: India
• Type: Clevenger Apparatus
• Name: glass

This apparatus is used for oil lighter than water. It volumes are 500mk . 1000ml capacity . It joint are B 24 . B 29joints . This apparatus are globally used in laboratory

• Type: Salt Spray Corrosion Cabinet
• Power: Electronic
• Usage: Salt spray chamber
• Test type: CASS
• Spray volume: 0.5---3.0

• Model: PHY-0043

To demonstrate that pressure increases with depth. Sheet metal cylinder 400 x 68 mm diameter with three equal size offices art different heights down on side.

  Modek -Ke-07 FEATURES Kiran test 7 Measures Pvt.Ltd.,manufacturing various types of test chambers.These entire chambers are the development of In-house Research & Development for the ten years.kiran can provide standerdized and cost effective systems to meet national and international test specification for various application Salt spray test is a standardized test method used to check corrosion resistance of coated samples. Coatings provide corrosion resistance to metallic parts made of steel, zamak or brass. Since coatings can provide a high corrosion resistance through the intended life of the part in use, it is necessary to check corrosion resistance by other means. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends of the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion.There is no correlation between the duration in salt spray test and the expected life of a coating, since corrosion is a very complicated process and can be influenced by many external factors. Nevertheless, salt spray test is widely used in the industrial sector for the evaluation of corrosion resistance of finished surfaces or parts.  We designed Salt Spray Apparatus as per ASTM B 117 AND ISO 9227.These standards describe the necessary information to carry out this test: We maintained all parameters as per above standards • Chamber Inner Dimension: (L) 830mm x (W) 700mm x (H) 700mm • Humidifying Tower • Fog Collector • Valume:400 Liters • Solution reservior tank • Chambrs Construction Material: on corrodible high temperture resistant glass • Control Panel (Humidity-temp. Indicator/Controller,pH indicator,Time totalizer,control switches) • Hood in acrylic • Salt Solution auto dozing systems • Power Requirement: 230VAC + 10% 50Hz.      

• Type: Digital Ecg Machine, Portable
• Weight: 5-10kg
• Color: Black, Light Grey
• Voltage: 220V, 220 V
• Condition: New
• Power: 220 V /50 HZ
• Driven Type: Electric
• Warranty: 1Year, 1 Year
• Certificate: CE Certified, ISO 9001:2008
• Automation Grade: Fully Automatic, Manual, Semi Automatic
• Country of Origin: India
• Brand Name: Ventrium
• Standard: MEDICAL GRADE
• Brand Name: Ventrium
• Standard: MEDICAL GRADE
• Color: Digital
• Use in: Hospital
• USED IN: DIAGNOSTIC CENTERS

We are offering stainless steel sieves.

as per ASTM D – 1525 and ASTM D - 648 to determine vicat softening temperature and heatdeflection temperature of plastics.Specification:  Temperature range : From ambient to 300ºC. No of stations : Three. Material of construction : Inner bath: S.S                                    Outer body: M.SRate of heating : 120ºC / hour and 50ºC / hour. Sensor : Range upto 10mm with resolution of 0.01mm. Weights : A set of weights ranging from 5grams to 2000grams would be supplied for incrementalloads. Paint : Powder coated. Power : 230 Volts, 50Hz, single phase. Graphic display and printout through PC:Penetration/Deflection Vs Temperature graph and numeric reports consisting values of vicat softening temperature and heat deflection temperature could be obtained by attaching a printer to the PC.

• Filter Diameter: 47 mm

Stainless steel manifolds, manifold valves, hose connectors; borosilicate glass filter holders (polysulfonepolypropylene Sterifil holder); autoclavable gum rubber tubing; silicone stopper.

Specification:   Temperature range : From ambient to 300ºC. No of stations : Three. Material of construction : Inner bath: S.S                                     Outer body: M.S Rate of heating : 120ºC / hour and 50ºC / hour. Sensor : Range upto 10mm with resolution of 0.01mm. Weights : A set of weights ranging from 5grams to 2000grams would be supplied for incremental loads. Paint : Powder coated. Power : 230 Volts, 50Hz, single phase. Graphic display and printout through PC: Penetration/Deflection Vs Temperature graph and numeric reports consisting values of vicat softening temperature and heat deflection temperature could be obtained by attaching a printer to the PC.

It's high sensitive digital thermometer which shows your exact body temperature as well as gives your stress level feedback.

• Test Stroke: 1000mm
• Control Mode: Manual
• Capacity: Upto 5000kg

• Sterility Test Unit47mm Stainless Steel (3 Branch Sterility)   • Sterility Test Unit47mm Stainless Steel (6 Branch Sterility   • Oil Free Vacuum Pump suitable for above Sterility  Model - PCI-75-S  Max. Flow - 45 LPM, Vacuum - 27" Hg (680 mm)  Max. Pressure - 55 PSig, 1/4 HP

The   consists of a cam profile and study of cam follower system. The instrument consists of cam mounted shaft supported by ball bearing upon which three different type of cam can be mounted. The push rod for follower is supported vertically which can adopt three different type of followers can be changed easily. Motor rotates the cam and dial gauge is provided for plotting of follower displacement W.R.T. cam position. Cam jump speed can be found by operating different speed and effect of speed and spring force on jump speed can also be studied. SPECIFICATION:- 1) Cam…. Ecentric, tangent, circular.   2) Follower…. Knife edge, roller type mushroom type.   3) Variable speed motor coupled to cam shaft of suitable range and various speeds.   4) A dial gauge.     *The unit is mounted on sturdy base.

We are offering our customers excellent quality Self Contained Breathing Apparatus which comes for 30 or 45mins duration. Complete set consist of back plate, harness, full face mask, demand valve, fresh cylinder (CCOE tested), pressure gauge. Make available: MSA, Drager, Spasiani, Intersperio, etc.

• TEMP. RANGE: -1°C to – 2°C
• EACH CHAMBER SIZE: 7” x 14” x 6”

The unit designed to meet the test method of ASTM D-2500-88D-97. For use to carry test of any petroleum oil as per test method. The bath is triple walled in construction with inner chamber made of stainless steel & exterior of G.I sheet duly finished in powder coated shade. The top surface of units is of hylembakelite thick sheet for easy cleaning. Each compartment having 4 test jacket made of copper cylindrical flat bottom -45 mm dia x 115 mm HT. Test jar made of clear cylindrical glass flat bottom 30 to 33.5 mm dia x 115 to 125 mm height. All 4 compartment having 4 cooling system which includes hermetically sealed compressor, condenser, fan motor etc- CFC free Cooling system. All 4 Compartment Temperature are being controlled by separate solid-state electronic temperature controller and Digital indicator. Selection of single, two or three chamber also.

• Material: stainless steel (SS)
• Diameter: 3"
• Stacking height: 1"

• Colour: Silver And Maroon
• Material:: Stainless Steel
• Length:: 9.6 inches
• Warranty: 1 Year Warranty From Hometown Against Manufacturing Defects

sterility test apparatus, HPLC Peek Tubing, filter flask, Column End Plug

* Sterility Test Unit 47mm Stainless Steel (3 Branch Sterility) * Sterility Test Unit 47mm Stainless Steel (6 Branch Sterility * Oil Free Vacuum Pump suitable for above Sterility Model - PCI-75-S Max. Flow - 45 LPM, Vacuum - 27 Hg (680 mm) Max. Pressure - 55 PSig, 14 HP

Medical Equipments