Laboratory Chamber Dealers in Andheri East, Mumbai

• COLOUR: Any kind of Standard
• SIZE: Any kind of Standard

We are offering laboratory chambers. We design and manufacture laboratory chambers cupboards used for testing and research applications. These laboratory chambers are made in polypropylene pvc frp as per clients requirement. We also supply blower required for there laboratory chambers.

Osworld Cooling Incubators are designed to serve a wide array of requirements, more specifically to conduct life cycle testing, shelf life studies, general incubation and refrigerated storage. These Cooling Incubators guarantee extremely accurate temperature regulation and uniform temperature distribution. Features Cooling Incubator • Temp. Control: Microprocessor-based PID Control with Auto-tune, CE Marked • Temp. Sensor: PT 100 RTD, Class "A" • Temp. Display: Digital LED, 3½ digit • Heating: U-shaped Nichrome wire heater in SS Sheathing • Cooling: CFC Free compressor utilizing R134A eco friendly refrigerant, with condenser, motor and relay. Complete Unit – Copeland Make. • Air Circulation: Flange motor with Impeller Blower • Chamber Illumination: Fluorescent light with door switch • Feet: Castor Wheels • Trays: SS Wire Mesh, Heavy Duty • Construction: Double-walled with Poly Urethene (PUF) insulation provided with outer stainless steel metal door and inner glass viewing door

  The model IPM-TVS300 table top vacuum sealer is flexible, easily programmable and inexpensive. It is designed to vacuum-pack foodstuffs by removing oxygen as well as any chemical and biological pollutant present in the environment. To attain the vacuum level you wish, just program the machine in order to remove almost all the air contained in the packet. This sealer will preserve organoleptic features, colour, taste, flavour and nutritive value for a long time. Power - 115 / 9A / .25hp - 6m3/h. Table Top model , Stainless-steel housing , High transparent lid.

• Range: 100 Amps to 800 Amps

All busbar come with fabricated body, rust protected and Phosphated in 7 tank process. All the sides of our busbar are detachable to facilitate easy wiring and allow expansionextension by coupling to another busbar. We use electrolytic Copper rectangular dual rods designed to be used with our clamps and sockets to facilitate all 3 types of cable sockets namely soldering type, lugs or flat copper strips. Our Busbar design ensured the correct rating all through out its use and will not allow any over load as the conventional model widely used in our country. No drilling required in our design, just add as many clamps to connect additional cable up to the limit of the length of the dual copper bars.

• Material: Outer MS and Inner SS
• Color: Blue
• Usage/Application: ALL Labs
• Brand: Agile
• Model Name/Number: AT-BOD
• Shape: Rectangular
• Capacity: 90L to 400L
• Temperature Range: ambient to 60C
• Automation Type: Semi-Automatic

Our climatic chambers provide excellent temperature and lighting control for regulated growth of plants and other products. Its responsive humidification sensor and energy efficient design make it a preferred choice for a wide range of applications. Basic specification : capacity: 150 l temperature range: 5-50°c (light off), 10-50°c (light on) temperature accuracy: ±0.5°c temperature uniformity: ±2°c temperature fluctuation: ±2°c

Humidity Control Ovens are developed as a result of intensive innovation. The ovens confirm to international standards and are manufactured as per GMP regulations. ICH Guidelines : Stability Chambers are designed specifically to meet ICH guidelines for general stability testing of new drug substances and products as per Q1A (R), for long term intermediate and accelerated testing. IQ, OQ, PQ & DQ : Provides protocols for Installation Qualification (IQ), Operation Qualification (OQ), Performance Qualification (PQ) and Design Qualification (DQ) with MOC and SOP. Calibration and Validation : Calibrates the chamber and provides certificate with traceability. Also assures the uniformity  in the chamber and complies to as per guidelines. Construction : The unit is a double walled, with exteriors made of mild steel, finished with powder coated epoxy paint. (optional-exterior made of stainless steel). Interiors made of stainless steel. The unit has glass wool insulation with full length inner glass door with latch. The outer door is a double walled metal door with magnetic gasket and lock. The unit has perforated adjustable and removable stainless steel trays, with forced air circulation for uniform temperature. The unit rests on castor wheels for easy movability. Heating and Cooling : The unit has been incorporated with long lasting S.S. tubular heaters with fins for better heat transfer. A hermetically sealed compressor coupled with evaporation coil and fan cooled condenser provides efficient cooling in the chamber. The cooling system is placed at the bottom of the machine for easy servicing. The compressor is safeguarded with time delay circuit. Humidity :  Humidity is formed by steam injection in the chamber. Humidity formed is non-condensing type to avoid droplets deposition on the samples. For steam formation a boiler tank is provided and connected with water tank (Reservoir). A float valve is provided in the water tank to control the water level. Sensors : The temperature of the chamber is sensed by PT-100 sensor measured in “I0;C”, with 0.1I0; C resolution. The set and measured temperature is displayed separately. The humidity in the chamber is sensed by electronic capacitance type senor and measured directly in “%RH” with 0.1I0;% RH. The set and measured humidity is displayed separately. Control Panel : The unit will be supplied with front panel at the top consisting of digital display microprocessor based temperature / humidity controller along with PT-100 temperature sensor and RH sensor for humidity control, ampere meter, main ON/OFF switch (MCB) and pilot lamps for all controls. Salient Features : Humidity is directly displayed in terms of % RH measured directly by RH sensor. Acoustic alarm is provided for detecting the temperature / humidity deviation from set value. Alarms are also provided for boiler water low level and open sensor. Dual Safety systems has been provided for over temperature in case of malfunction to protect the samples. Better reliability for its performance             Supply Voltage : 230 Volts, AC 50 Hz  Microprocessor Based Temperature and Humidity Controllers : Control Panel : The control panel is a membrane key board provided with digital display selectable indicators. The data mode has the following parameters : 1) Real Time, 2) Date, Month and Year, 3) Temperature / Humidity,4) Print interval duration 10 to 990 mins. 5) Print Mode (on / off line) A)  Ordering Information TEMP RANE : 10 C TO 50ACCURACY :+/- 0.5C. HUMIDITY RANGE :40 TO 95% RH        ACCURACY: +/-3% RH Centronic Port For Printing Data on Printer : The unit offer data printing on printer at the desired duration the recording interval can vary from 10 to 990 minutes in step of 10 minutes and can store data upto 3000 readings (If print interval is 30 mins. Then it stores upto 30 days). This enables one to maintain a records of the test as per the requirements of GMP & FDA regulations. RS 485 Port For Interfacing With Computer OPTIONALS :- Temperature / Humidity Scanner 4 Points (auto Validation System) : The unit can be supplied with a 4- point temperature and 4-point humidity scanner, with PT-100 temperature sensor and electronic humidity sensor. The sensors are placed at the four corners of the chamber i.e. at the upper and lower part of the chamber to know about the temperature / humidity gradient (i.e. self –validation system). The data can be stored in memory. The recording interval can vary from 10 to 990 minutes in step of 10 minutes and can be printed on a dot matrix printer. The data can also be stored in a computer. Dot Matrix Printer : The unit can be supplied with 80 columns dot matrix printer with trolley for printing data i.e. date-time, set-temperature, measured-temp, set RH and measured RH.

Our thermal shock chambers stand out for their utmost flexibility. They efficiently alternate between temperature extremes which is achieved by high speed heater and air cooled condenser. With rugged stainless steel exterior and fibreglass insulation, these chambers are a perfect choice for environmental testing of products. Basic specification : capacity: 80 litres temperature range: 0 to 150°c temperature accuracy: 0.3°c temperature uniformity: 1.5°c humidity range: 20-98% rh

Description :-A compact histamine aerosol apparatus consisting of a clear perspex exposition chamber divided in two sections and all glass neubilizer and dial type sphygmomanometer for assay of anti-histamines drug on guinea-pigs etc.

Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided. Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at the bottom to take heavy load. The FOG Chamber conforms to ASTM B 117 specification. The volume is of sufficient size to test adequately the desired number of parts without overcrowding. The apparatus consists of a fog chamber, a salt solution reservoir, a supply of moisture free compressed air, atomizing nozzles, specimen supports, provision for heating the chamber, humidifying chamber and control system. The fog chamber is provided with digital temperature controller, pressure gauge, provision for controlling the mist, humidity indicator and solenoid valve to regulate these conditions. Capacity : 100, 200, 400 and 600 Litres.

• Details: Mirror finished stainless steel inner chamber and cold-rolling steel with static spray plastics exterior • Double door design with built-in tempered glass viewing window Etc.
• Specification: Capacity 150 L Temp. Range 5-50°C (Light off), 10-50°C (Light on) Temp. Accuracy ±0.5°C Temp. Etc

Labocon Climatic Chamber is used for plant growth, tissues cultivation, seed germination, insects or infant animals breeding, microorganism or antibiotic cultivation and preservation, and other constant temperature and illumination experiments.

walk in type environmental test chamber, precision oven

description :-they are mainly used to test the reliability of various products and components, on continuous exposure to various environmental conditions. Environmental test chambers include digital readout, analog meter or video display with test results; and provide heating and cooling effect.there are some environmental test chambers that control emissions from various equipment under properly controlled conditions. Again there are some test chambers that subject various products, components and samples to extreme humidity, thermal cycling or extreme temperatures.application :environmental chambers are used to test the reliability of products and components. They find wide application in the following areas. semiconductors fiber optics automotives medical field rf microwave communications electronic and non-electronic aerospace military defense

Sequential Marker, Thermal Stability Test Apparatus

Solar Environmental Chamber, Weather-O Meter, Cyclic Corrosion Cabinet

spray tower, Moulded Frp Impeller, Pneumatic Sprue Cutter, Frp Fume Cupboards

cold chamber

Laboratory Fume Chambers, Scrubbers, injection molded