Laboratory Chamber Dealers in Kandivali West, Mumbai

• Temperature Range: 10° C - 35° C Lights On 5° C - 35° C Lights Off
• Humidity Range: 40% Rh to 90% Rh Lights On 40% Rh to 90% Rh Lights Off

At Newtronic, we always strive to deliver the most innovative products, superior With Plant Growth technology, precise functionality and environmental friendly solutions. In continuation to our commitment, Plant Growt Chambers are our new innovation, where you experience uncompromising performance guarantee through stringent temperature, light and humidity control. Our engineering team can construct an exact growth chamber that meets or exceeds your research; depending upon requirement we can provide you small plant growth chambers or large walk-in type plant growth rooms. These units achieve reliable interaction between heat or cold, humidity and light; also feature an extended variety of temperatures and lighting patterns that are essential for plant growth research. Utilizing years of successful experience, these units are acclaimed by various industry experts. Whether research labs, agricultural labs, education, universities and institutes, our products are working perfectly and delivering precise results.  

• Precise Temperature Control Accuracy: ±0.5° C
• Best uniformity of Temperature: ±1.0° C

Precise accuracy and uniformity of Temperature by convection Technology. Double walled interior and exterior made of S.S. 304 with matt finish insulated with �CFC� free poly urethane foam PUF insulation. Full length inner glass door with lockable outer metal door. Poly fiber castor wheels provided for easy mobility. The unit is provided with safety devices for temperature over / under shoot in case of malfunction. Audio and visual alarms are generated for temperature variation. IQ, OQ, & PQ Protocols. Calibration & Validation will be provided as per the protocol. Lighting system: � A cool white fluorescent light for 1.2 million LUX hours exposure. � UV-A lights for 200 watt hours / square meter exposure. � Both the lights have independent control to avoid over exposure. Power Supply 230 V ; 50 Hz.

• Type: Incubators
• Material: Mild Steel, Stainless Steel
• Shape: Rectangular, Square
• Certification: ISI Certified, ISO Certified
• Application: Industrial Use, Medical Use
• Color: Blue, Green, White
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Temperature: 0-50Deg C, 50-100Deg C
• Volume: 100-150ltr, 150-200ltr, 200-250ltr, 300-350ltr
• Automation Grade: Fully Automatic, Semi Automatic
• No of Shelves: 2 Shelves
• Country of Origin: India

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Color: Blue, Light Green, Light White
• Driven Type: Electric, Mechanical
• Warranty: 1year
•  Use: Chemicals, Enzymes, Storaing Drugs
• Voltage: 220V

HUMIDITY CHAMBER 

Technical Specifications: Incubators are Sturdy Double walled Unit Inner chamber made of S.S.304 & outer chamber made of M. S. powder coated Gap between the two walled filled with glass wool insulation to avoid heat loses Heating element is made of high grade chrome plate nichrome wire Temp is controlled by thermostat Temp. Range 5 C above ambient 60 C accuracy ± 2 C Air Ventilation is provided on the top of the unit to remove the hot gases/Fumes In lab type incubator heaters are placed in the bottom side of the Unit All the control switches & Pilot lamps are fitted on the front panel Tray should be supplied with G.I. ware Mesh Optional Accessories: Digital Temp. Controller cum indicator in Live of thermostat with Accuracy ± 0.5C Air circulation Fan for Uniform Temp Digital Timer S. S. Wire mesh jail

Our company has got a huge experience in manufacturing, exporting and supplying of Stability Chamber in the market. The Stability Chamber that we provide is manufactured by using the highest grade raw materials and is highly demanded. Our Stability Chamber provides excellent humidity control and has been appreciated for its automatic functioning and temperature control. With us, the clients can avail reasonably priced Stability Chamber. Humidity Control ovens are designed & developed with taking full efforts & innovating. The Humidity Ovens are manufactured by keeping in mind the GMP regulation & confirm to international Standard & ICH guidelines to fulfill the requirements completely. The Humidity control oven are especially & widely suitable for carrying out Stability Tests of Drugs & Drug Substances, Electronic & Electrical Components, Corrosion Test on Mechanical assemblies, Tests on Packages, Paints & Varnishes, Cement Plant & variety of others application in order to find out whether the substance to be tested remain stable during a define period of time under the aging & the corrosion factors with the Temperature & the Humidity. Calibration & Validation The Raj scientific Industries will provide the calibration certificate of the controller With trace ability of the Indian government�s approved agency. The company also does the validation of the chamber i.e. recording the temperature & Humidity at different places in the chamber confirming uniform temperature & Humidity throughout the chamber & no developing of hot & cold zones in the chamber. Construction Construction of double walled, The Exterior is made of Galvanized sheet with epoxy powder coated finish (optional exterior of Stainless Steel). Interior made of Stainless steel with Glass wool insulation. The full body rests on Castor wheel for easy mobility Door Construction A flush fitting insulated door has leak proof Magnetic Gasket with Lock & Key wears as Full-length inner door of acrylic, which allows a clear view of samples without loss of chamber condition during operation. Trays : Perforated removable Stainless Steel shelves are provided along with the unit 1no for 1 ½ cu ft, 2 no for 6, 10, 12, 16 cu ft etc Circulation : Forced air circulation throughout the chamber for uniformity & accuracy Heating : Long lasting stainless steel tubular heater are been used as heating element Cooling A hermetically sealed compressor with evaporating coil & fan-cooled condenser provides efficient cooling in the chamber. The compressor is safeguard with time delay circuit & overload protection. The cooling system is placed at the bottom of the working chamber for easy servicing & for low noise vibration. Humidity Humidity is formed by steam Injection method in to the chamber. A non-condensing humidity is formed to avoid droplet deposition on the samples. A boiler tank & the storage tank is provided at the bottom of the unit were the cooling system is placed with automatic cut out of water, with low water level cut off switch for heater. Temperature & Humidity Sensing Device Temperature of the chamber is sensed by Pt �100 Sensors & measured in �Deg C� Set & Measured temperature is displayed on the controller by 3 segments LED with 0.1Deg C resolution. Humidity of the chamber can be sensed by two method for Wet bulb indirect RH it can be sensed by Pt � 100 Sensor & will be Set & Measured humidity is displayed on the controller by 3 segments LED with 2 % RH. For Direct RH Display Electronic Capacitance type sensor & will be Set & Measured Humidity is displayed on the controller by 3 Segments LED with Direct RH % Control Panel The control panel will be on the top of the unit for easy setting of the temperature & RH it will consist of Digital Display Temperature controller Wet Bulb & Direct RH Display Controller, with Line, Mains, Cooling, Heating & Push On / Off Button for inner chamber Illumination. Salient Features Humidity is directly measured in % RH by Electronic Sensor for direct read out temperature controllerAlarm / Indication lamp for boiler sensing low water level in the tank. Humidity Control Oven Temperature range : 100C to 600C Accuracy : - + 0.50CHumidity Range : - 0 % to 100 % Rh.Accuracy : - + 1% Optional Accessories Direct RH Controller Cum Indicator with Japan make Sensor Direct RH Controller Cum Indicator with Rotronics make SensorMicroprocessor based P.C / PrinterLighting arrangement with timerAs per GMP Model

We are recognized as a dependable Manufacturer, Exporter & Supplier of Walk in Humidity Chambers. Walk in Humidity Chambers, offered by us, are of superior quality and have high durability. The company offers Walk in Humidity Chambers of different specifications. For Stability study as per ICH Q1A (R2), ANVISA, ASEAN : Suitable for 25 oC 60% RH, 30 oC, 65 % RH, 40oC 75% RH, 30 oC, 25 oC 40% RH NMT 25%RH Details Temperature Range : 20oC - 60oC | Humidity Range : 40 %RH - 95 %RHCustom Build Chambers : Standard Inner Heights 2.0, 2.4, 3.0 MTStandard Inner Width : 1.36, 2.0, 2.5, ,4.0 MTStandard Inner Depth : 2.0, 3.0, 4.0, 5.0 Mt

LAB CARE: Environmental Stability Humidity Test Chambers are especially designed to conduct stability and shelf life studies on drug and drugs substances. In addition to this, Stability Test Chambers are extensively used for seeds testing, biological studies, testing on electronic & mechanical components, Cement plants, packing industries etc. Lab Care chambers conform to International Standards such as ICH, WHO Guideline, and USFDA requirements.

Plas Labs, U. S. A. Plas-Labs is the world leader in Acrylic Containment and lsolation Technology. Since 1967, Plas-Labs’ product line of glove boxes have been used in research laboratories all over the world. Plas-Labs Hypoxia Chamber Glove Box is the latest in CO Control, Oxygen Control and Temperature Controlled Containment System. Products include Glove Boxes, 2 Anaerobic Chambers, isolators, Environmental Controlled Chambers, Desiccators, PCR Chambers, Nitrogen Dry Boxes, Animals Care and Animals Research Products.   Features: Heavy gauge .375″ and .500″ thick transparent jeweled acrylic plastic. Closed cellular (One piece) Poron gasket. Unique “gasket guard” system to prevent gasket from taking a “set.” Nylon inlet and outlet gas nipples, hosw barb style, size 1/8″&1/4″ hose barbs. Greaseless Neoprene “O” ring.

• Temperature Range: 20°C to 60°C
• Temperature Accuracy: ± 0.2°C
• Temperature Uniformity: ± 1°C
• Humidity Range: 40% RH to 95% RH

These are medium to large-sized chambers that are custom-built to ensure that they not only fit optimally in your lab's stability area but also address your large-scale stability testing requirements. Walk-In Chambers have now become a de-facto requirement for companies planning multiple ANDA filings & planning to launching various products simultaneously.

Humidity Chambers, Cooling Incubators, Deep Freezers, lab incubators

Air Distribution Chamber, Integral Solder Fittings, end feed fittings

photo stability chambers, High Temperature Muffle Furnace