Laboratory Chamber Dealers in Mumbai

• Features: Programmable Touch Screen Controller, Running Time Meter, Wide Temperature and Humidity Ranges, Capable of Handling Extreme Temperature and Humidity, High Performance Even Under Load
• Temperature Range: A: -20∼150oC, B: -40∼150oC, C: -60∼150oC, D: -70∼150oC, E : or customized
• Temperature Fluctuation: ±0.5oC
• Temperature Uniformity: ±2.0oC
• Ramp Rate: 1∼3oC/min for heating, 0.7∼1.0oC/min for cooling
• Humidity Range: 20%∼98% R.H
• Humidity Fluctuation: ±2%
• Humidity Fluctuation: +2%  -3% R.H 

We offer Stability Test Chambers to be used as PharmaceuticalsDrug Stability Chambers and Pharmaceutical Test Chambers. Our Stability Test Chambers are specially designed to conduct stability and shelf life studies on drugs and drug related substances and used extensively in the research works to define the product life cycles and also to detect the minute defect in the products. Other applications of our test chambers include study of cells of living beings. These studies involve setting of specific temperature and other factors responsible for the development of these cells.   This kind of study is also useful to learn about vegetables, flowers and some perishable foods items, as the right temperature for storage is crucial for their longer usability. Our Test Chambers conform to the International Standards such as ICH, WHO Guidelines, and USFDA requirements. Special Features   Precise control of temperature and humidity by using CE approved micro controller based design. PID controller (Imported, Auto tuning type.). Digital display of % RH with electronic capacitance type humidity sensor which requires no wet wick and water supply(Optional). Refrigeration system with CFC free compressor and R-134a ECO- friendly refrigeration system with time delay. PC interface with Windows based communication software. (Optional) Micro controller based programmable timer for chamber illumination. (Optional). Foamed - in - place PUF insulation ensures temperature stability and reduced energyconsumption. Audiovisual alarm if the temperature deviates from the pre- set temperature (Optional). Cabinet Construction and Refrigeration System   The chamber cabinet comes insulated with an optimized high-density CFC free Poly Urethane Foam. The interior of the chamber is made with mirror finish surface of stainless Steel (304 SS, 0.8 mm thick) and the exterior with white powder coated (1.0 mm thick) mild steel. The door has a systematic magnetic door gasket with a single keyed door lock. The stainless steel trays are provided for storage inside. The perfect cooling is achieved by a hermetically sealed compressor unit of premium quality. Complete stainless steel GMP models (Inside SS 316 with mirror finished and outside. SS 304, dull finish.) is also manufactured by us.

• Material: Metal
• Voltage: 230V
• Durability: Long Life
• Temp Range: 5 Degrees Celsius Above Ambient to 60 Degrees Celsius
• Resistivity: Rust Resistant
• Accuracy: +- 2 Degrees Celsius
• Drive Type: Electric

Specifications : Incubators are sturdy double walled units. Inner chamber made of S.S and outer made of Mild Steel with Powder coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated nicrome wire. Temp. is controlled by thermostat. Air Ventilations are provided on the top of the unit to remove the hot gases / fumes. In Lab type incubators heaters are placed in the bottom side of the unit. All the control switches & pilot lamps are fitted on the front panel. Trays should be supplied with G.I wire mesh.

• Brand Name: VAV
• Temperature: +10 to 60 Degree C
• Temperature Resolution: 0.1 Degree C
• Compressor: Hermitically Sealed
• Display: Digital
• Humidity: 40% R.H to 95% R.H

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Color: Blue, Light Green, Light White
• Driven Type: Electric, Mechanical
• Warranty: 1year
•  Use: Chemicals, Enzymes, Storaing Drugs
• Voltage: 220V

HUMIDITY CHAMBER 

• Voltage: 220-240 V
• Humidity range: 20% to 95%
• Material: Stainless Steel
• Power Source: Electric
• Temperature Range: 0-60 degree C

Technical Specifications: Incubators are Sturdy Double walled Unit Inner chamber made of S.S.304 & outer chamber made of M. S. powder coated Gap between the two walled filled with glass wool insulation to avoid heat loses Heating element is made of high grade chrome plate nichrome wire Temp is controlled by thermostat Temp. Range 5 C above ambient 60 C accuracy ± 2 C Air Ventilation is provided on the top of the unit to remove the hot gases/Fumes In lab type incubator heaters are placed in the bottom side of the Unit All the control switches & Pilot lamps are fitted on the front panel Tray should be supplied with G.I. ware Mesh Optional Accessories: Digital Temp. Controller cum indicator in Live of thermostat with Accuracy ± 0.5C Air circulation Fan for Uniform Temp Digital Timer S. S. Wire mesh jail

Humidity Control Ovens are developed as a result of intensive innovation. The ovens confirm to international standards and are manufactured as per GMP regulations. ICH Guidelines : Stability Chambers are designed specifically to meet ICH guidelines for general stability testing of new drug substances and products as per Q1A (R), for long term intermediate and accelerated testing. IQ, OQ, PQ & DQ : Provides protocols for Installation Qualification (IQ), Operation Qualification (OQ), Performance Qualification (PQ) and Design Qualification (DQ) with MOC and SOP. Calibration and Validation : Calibrates the chamber and provides certificate with traceability. Also assures the uniformity  in the chamber and complies to as per guidelines. Construction : The unit is a double walled, with exteriors made of mild steel, finished with powder coated epoxy paint. (optional-exterior made of stainless steel). Interiors made of stainless steel. The unit has glass wool insulation with full length inner glass door with latch. The outer door is a double walled metal door with magnetic gasket and lock. The unit has perforated adjustable and removable stainless steel trays, with forced air circulation for uniform temperature. The unit rests on castor wheels for easy movability. Heating and Cooling : The unit has been incorporated with long lasting S.S. tubular heaters with fins for better heat transfer. A hermetically sealed compressor coupled with evaporation coil and fan cooled condenser provides efficient cooling in the chamber. The cooling system is placed at the bottom of the machine for easy servicing. The compressor is safeguarded with time delay circuit. Humidity :  Humidity is formed by steam injection in the chamber. Humidity formed is non-condensing type to avoid droplets deposition on the samples. For steam formation a boiler tank is provided and connected with water tank (Reservoir). A float valve is provided in the water tank to control the water level. Sensors : The temperature of the chamber is sensed by PT-100 sensor measured in “I0;C”, with 0.1I0; C resolution. The set and measured temperature is displayed separately. The humidity in the chamber is sensed by electronic capacitance type senor and measured directly in “%RH” with 0.1I0;% RH. The set and measured humidity is displayed separately. Control Panel : The unit will be supplied with front panel at the top consisting of digital display microprocessor based temperature / humidity controller along with PT-100 temperature sensor and RH sensor for humidity control, ampere meter, main ON/OFF switch (MCB) and pilot lamps for all controls. Salient Features : Humidity is directly displayed in terms of % RH measured directly by RH sensor. Acoustic alarm is provided for detecting the temperature / humidity deviation from set value. Alarms are also provided for boiler water low level and open sensor. Dual Safety systems has been provided for over temperature in case of malfunction to protect the samples. Better reliability for its performance             Supply Voltage : 230 Volts, AC 50 Hz  Microprocessor Based Temperature and Humidity Controllers : Control Panel : The control panel is a membrane key board provided with digital display selectable indicators. The data mode has the following parameters : 1) Real Time, 2) Date, Month and Year, 3) Temperature / Humidity,4) Print interval duration 10 to 990 mins. 5) Print Mode (on / off line) A)  Ordering Information TEMP RANE : 10 C TO 50ACCURACY :+/- 0.5C. HUMIDITY RANGE :40 TO 95% RH        ACCURACY: +/-3% RH Centronic Port For Printing Data on Printer : The unit offer data printing on printer at the desired duration the recording interval can vary from 10 to 990 minutes in step of 10 minutes and can store data upto 3000 readings (If print interval is 30 mins. Then it stores upto 30 days). This enables one to maintain a records of the test as per the requirements of GMP & FDA regulations. RS 485 Port For Interfacing With Computer OPTIONALS :- Temperature / Humidity Scanner 4 Points (auto Validation System) : The unit can be supplied with a 4- point temperature and 4-point humidity scanner, with PT-100 temperature sensor and electronic humidity sensor. The sensors are placed at the four corners of the chamber i.e. at the upper and lower part of the chamber to know about the temperature / humidity gradient (i.e. self –validation system). The data can be stored in memory. The recording interval can vary from 10 to 990 minutes in step of 10 minutes and can be printed on a dot matrix printer. The data can also be stored in a computer. Dot Matrix Printer : The unit can be supplied with 80 columns dot matrix printer with trolley for printing data i.e. date-time, set-temperature, measured-temp, set RH and measured RH.

Our Salt Spray Chambers are manufactured in compliance to various standards like IS 2074 8168 IS 6910. These are mainly used to test the effect of salt on products by spraying it on them. Salt Spray Chambers are fabricated using rust-resistant material to ensure durability and strength. We are engaged in manufacturing and supplying a high quality range of Salt Spray Chambers. Designed and developed in compliance with the IS 2074, 8168, and 6910 standards, these Salt Spray Test Apparatus are widely acknowledged for features like high durability, strength, and rust resistance. This equipment is used to measure the effect of salt on different specimen products under test.

• Capacity: Working Chamber Size
• 3 Cu Feet (85 Ltrs): 40 x 40 x 55Cms
• 6 Cu Feet (170 Ltrs): 85 x 50 x 40Cms
• 10 Cu Feet (285 Ltrs) : 88 x 57 x 57Cms
• 12 Cu Feet (340 Ltrs) : 95 x 60 x 60Cms

These humidity test chamber can satify a variety of environmental condition. They are especially suitable for the simulation of temperature & there relative Humidity (RH) values above freezing point, seed germinator are useful for seed testing, biological studies, forestry research work, stability, packing & electronic test specimens. The Chamber are widely used for testing electronic & electric components, corrosion test on mechanical assemblird, test on packages, paints &varnishes, cement plants & variety of application. Construction of the double walls the exterior is made of GI. With power coating Flush fitting insulated door has magnetic gasket, the inner chamber is mde up of 304 quality stainless steel. The Plexiglas inner door makes it possible to inspect specimens without disturbing the temperature. The self postion of trays is adjustable. A rear chamber of interior if fitted the refrigeration evaporator, heater & powerful air circulating fan for creating positive airflow through the chamber. A hermetically sealed compressor housed below the unit provides temperature below ambient. The same compartment houses a boiler with the immersion heater & water level controller for creating humidity. All controls are mounted on the top of the unit for better Viewing & controlling. A solid state temperature controller with digital temperature display control are simple to set direct humidity % RH & temperature in digital indicator.  

• Voltage: 220-380V
• Temperature: 5 deg to 60 deg C
• Heating: 95% RH
• Brand: Hamco
• Body Material: Mild Steel
• Finish: Epoxy powder coat
• Power Source: Electric
• Frequency: 50-60 Hz

• Type: Bacteriological Incubator
• Material: Aluminum, Metal, Mild Steel, Stainless Steel, Steel
• Application: Industrial Use, Medical Use
• Color: Black, Blue, Green, Purple, White
• Condition: New, Used
• Frequency: 50Hz, 60Hz
• Warranty: 1 Year
• Automation Grade: Fully Automatic, Semi Automatic
• Voltage: 220V

Our climatic chambers provide excellent temperature and lighting control for regulated growth of plants and other products. Its responsive humidification sensor and energy efficient design make it a preferred choice for a wide range of applications. Basic specification : capacity: 150 l temperature range: 5-50°c (light off), 10-50°c (light on) temperature accuracy: ±0.5°c temperature uniformity: ±2°c temperature fluctuation: ±2°c

• Temperature range: +10...60°C.,
• Humidity range: 10...85% Rh.
• Accuracy: +/- 3% Rh.

Stability Chamber are special purpose storage equipments used for storing materials in agricultural, Pharmaceutical, Food Industries, R & D institution etc,. Dedicated Intel based Microprocessor Computer hardware & Windows Operating system, with support software for PLC operation for the Walk In Chamber Electronic System, Online Data Logging and Graphical presentation of the status. Data Aquensation from remote places. User Authentication Software for Operation.

• Type: Incubators
• Material: Mild Steel, Stainless Steel
• Shape: Rectangular, Square
• Certification: ISI Certified, ISO Certified
• Application: Industrial Use, Medical Use
• Color: Blue, Green, White
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Temperature: 0-50Deg C, 50-100Deg C
• Volume: 100-150ltr, 150-200ltr, 200-250ltr, 300-350ltr
• Automation Grade: Fully Automatic, Semi Automatic
• No of Shelves: 2 Shelves
• Country of Origin: India

• Brand Name: Bio Techno Lab

The Environmental Test Chamber is used for creating ideal conditions for industrial component / product research and bio technical specification test. The Environmental Test Chamber is the most accurate and reliable chamber for long-term high temperature and RH testing. The Environmental Test Chamber has temperature range from 10oC to 60oC with an accuracy +- 0.5oC and relative humidity range from 35% RH to 90% with an accuracy +-3% RH. Details : A positive vertical air circulation ensures temperature and RH uniformity. Digitally set, temperature and Humidity controller with direct digital read out in temperature and percentage RH. Low pressure Boiler to generate steam for chamber humidification. Well balanced refrigeration system. Double walled construction inner chamber S.S. and outside of Mild steel beautifully powder coated. The chamber is provided with modular removable shelves made of S.S. for complete flexibility in use. A key lockable insulated door having positive door gasket seals doors perfectly. Control panel mounted on the top of the Unit. It work on 230 volts. A.C. only.   Sizes 45 x 45 x 45 Cm. 71 x 45 x 45 Cm. 85 x 50 x 50 Cm. 100 x 90 x 90 Cm. 190 x 100 x 100 Cm.

hmg chambers are specially designed to carry out stability and shelf life test on drug and drugs substance according to ich guidelines, which are adopted by the industry and implemented, by food and drug administration. other applications includes the system offers reproducible temperature and humidity conditions applicable to rest in the field of research, development, production and quality control with following uses. * conditioning of samples. * accelerated shelf life studies. * environmental testing for storage and intermediate storage by pharma, food & cosmetic industries. * climatic conditioning for plant research, pesticide research and zoology