Laboratory Equipment Dealers in Andheri East, Mumbai

• Application: Laboratory
• Color: Available in various Colors

Features Certified CE, ISO 9001, ISO 14001 Obtained GD, QD Mark (Good Design, Qualified Design) Auto regular recycling every hour Standby function : Auto recyclinglower than setting value. Programmable by 2 steps for the filter exchanges to maintain water quality. 254/185 UV lamp MW 5000 UF filter PVDF 1/4 Dispensing gun   Included Filter & Accessories : Prefilter, Super A/C Filter, RO Pack, Power UP Pack, Level Sensor, Manul, Hand Lever, Power cord   Optional Accessories : PVDF1/4 Dispensing gun, Pretreatment system, Low pressure valve, Wallmounting bracket, Frame, Water Tank, Vent Filter.

• Country of Origin: Worldwide
• Certification: CE Certified, ISO 9001:2008
• Application: Heat Use
• Weight: 10-20kg, 30-40kg
• Color: Brown, Grey, Silver
• Voltage: 220V
• Condition: New
• Capacity: 20L/Hr, 60L/Hr
• Power: 100-200W, 400-800W, 800-1600W
• Driven Type: Electric, Solar
• Warranty: 5yrs
• Automation Grade: Automatic, Fully Automatic
• Ambient: 0-180 Deg C 180-360 Deg C
• Color: Grey
• Product: Brand new
• Usage: 567

• Material: Plastic
• Feature: Light Weight, Perfect finish, High quality
• Color: White
• No. of slide: Single
• Packaging Type: Box
• Usage/Application: Laboratory

Aperture Shape: Roudn, Square, Grater, Design:c.GMP Quality. Special Sieves : For handling very hard material, sticky material & high loads. Sieves suitable for various all International manufacturers like Alexanderwerks, Gerteis & Indian Machine Manufacturers. Sieves can be tailor made to your specificatons. *Alexanderwerks, Gerteis are not in anyway affiliated with Filter Woven India

• Machine Type: Resting
• Automation Grade: Automatic
• Voltage: 415 V
• Brand Name: Contec
• Power: Electric
• Country of Origin: Made in India
• Model Name/Number: 8000S
• Frequency: 50 Hz
• Display Type: LED

• Material: Stainless Steel-316 and 316-L Quality 
• Hole Size: 25.4mm to 25 microns
• Hole Shape: Square, Circular

Vibro Sifter Sieves    We manufacture Vibro Sifter and Mechanical Sifter Sieves. We manufacture 1. Lead Free Silicon Moulded Vibro Sifter Sieves 2. Non Lead Free Vibro Sifter Sieves Enquiry  

• Application: Medical Use
• Driven Type: Electric
• Automation Grade: Semi Automatic
• Machine Type: Digital
• Frequency: 50/60 Hz
• Printing Mode: Manual, Auto

Stainless steel capillary tubes that conform to the strictest national and international standards and customer specifications and charaterised by tight OD tolerance, precise precut lengths, smooth surface finish and are free from oil, grease and other particles.

We are offering Stainless Steel Strainer-3.

Range of Graduations for cutting of Specimen 1-40µm 1-10µm in increments of 1µm 10-30µm in increments of 2µm 30-40µm in increments of 5µm Distance of Vertical Movement 60mm Angle scale for fitting knife older 0-20° Universal Clamp of Specimen Max. opening 45mm Quick release Clamp (Option) Cassette type Combination (Selectable) Object Disc (20, 45mm) - 1 Microtome Knife 15cm - 1 Dispo. Blade Holder - 1

• Material: Plastic
• Country of Origin: Made in India
• Usability: Reusable
• Brand Name: Shalya
• Usage/Application: Laparoscopic Surgery
• Is It Water Proof: Yes
• Color: Black

• Brand Name: TAGLab

We are offering reynold apparatus. Open circuit type set - up reynolds's upper & lower critical numbers, velocities & to know the type of flow laminar turbulent simple in construction; storage tank with flow steadying arrangement dye bottle & capillary tube arrangement provided proper base frame is provided to mount the perspex tube to prevent rusting, tanks are made up of m.s. Sheet with powder coating.

Minimum Pressure Drop Bigger Filteration Area Jacket

To determine compliance with safety requirement of mechanical strength of test samples   Features   Repeated falls from a height of 500 mm Revolution speed of the barrel: 5 RPM Self-contained compact unit that can be floor mounted Laminated wooden barrel mounted on a sturdy support frame Motorized operation enables ease of use Rotation Speed of five RPM, providing a fall rate of ten falls per minutes Steel base plate fixed at both ends of the barrel as specified in the standards Digital pre-set four digits counter with bright LED dual display, membrane keypad selection and battery back-up to memorize count value in case of power cut-off Audible / Visible ‘Test’ indication Transparent acrylic sliding cover allows easy loading and unloading of the test sample, and allows inspection during the test. Cover can be locked during the test Two castor wheels and one adjustable foot provide mobility as well as levelling facility Non-contact proximity sensor ensures reliable operation Barrel JOG Switch to bring the barrel to upright position after end of Test Compact Size, can be floor mounted   Specification     It consists of a wooden barrel, with a shape and dimensions as specified in the relevant standard. The barrel is rotated about its central axis by a motor such that its speed is five revolutions per minute.

These furnaces consist of heating element refractory forming the required chamber in two halves or a one piece tubular chamber. The length of the chamber is order in multiples of 300mm. as per the requirement. Inert gas atmosphere can be created in the tube strands as per the requirement of process. Maximum tube size and length varies as per the table given below. The furnaces have built in control panel or a wall mounting type control panel as per the requirement of customer and space restrictions.       APPLICATIONS Elongation *Thermal Expansion *Chemical process *Annealing *Bright Annealing *Wire IndustriesFEATURES Sturdy Construction *Uniform Temperature *Precise Control *Effective Insulation  *Firm Sealing *Separate Control Panel *Single or Multi-chamber

Incorporated with maintenance free Dispenser.No Refilling is necessary after every titration.Several titrations can be carried out uninterruptedly.Average factor calculation facility.Results are Automatically Calculated in Percentage, PPM and mg of H2O.Inbuilt volume validation facility.Equipped with inbuilt volume validation facility.RS 232 Interface for PC to download the data.Three User Level based functionality: Admin, Manager and Operator.

• Silt Density Index: Less Than 1.0 SDI
• Turbidity: Less Than 0.1 NTU

Laboratory water system high pressure sitch is provided for ultrafiltrationso as to safeguard system. As soon as discharge pressure & pressure drop is more than 15 to 20% than normal then system will give alarm & if not attained within 5 min., the system will be tripped automatically.

  Strainers Orifice, Swivel Ring, and Anchor Flanges Isolation Joints Barred Tees Launchers and Receivers Stud Bolts and Nuts Gasket and Flange Insulation Kits

SS 316 L Quality Membrane Filter Holder (GMP):- ss 316 L quality for filteration of sterile solutions. Complete with two silicon ‘O’ rings and support screen with non-sticking mirror polished bolts and wing nuts An air valve is also provided to remove inside air initially and available in 142mm & 293mm dia sizes

Wesmec engineering pvt ltd is offering laboratory apparatus in india, these are specially designed to ensure maximum safety and ease of use.

It is made out of ss 316 L quality for filteration of sterile solutions. Complete with two silicon ‘O’ rings and support screen with non-sticking mirror polished bolts and wing nuts An air valve is also provided to remove inside air initially. Complete unit rests on suitable legs.It is available in 142mm & 293mm dia sizes SS 316 L Quality Membrane Filter Holder (GMP):- ss 316 L quality for filteration of sterile solutions. Complete with two silicon ‘O’ rings and support screen with non-sticking mirror polished bolts and wing nuts An air valve is also provided to remove inside air initially and available in 142mm & 293mm dia sizes

Constant speed fan with variable flow control valve – for better flow control. Heater interlock for safety. Includes Pitot tube traverse for velocity profile measurements and traversing thermocouple to measure temperature distribution across the test pipe . Includes thermocouples along the test pipe to measure heat transfer. Accurate digital display of temperatures.

The Ultrasonic Atomiser uses Ultrasonic energy (Low/Medium) to generate low velocity, gentle spray unlike the conventional atomizing nozzle which depends on pressure & high velocity motion to shear a fluid into small droplets. The fluid (Liquid) is dispensed to the atomizing probe by either gravity or low-pressure small pumps & atomize continuously or intermittently as per requirement. The sample can be accurately delivered to the target area & over spray is virtually eliminated thus, resulting in material savings. The atomizer can runs continuously or be programmed to pulse On & Off. The rate of atomization depends within limits solely on the volume that is been delivered onto the atomizing surface & the frequency it operates. Typically higher the frequency, the lower the processing capability. With water the average droplet size is 50 microns and the minimum sample volume that can be effectively atomized is 2µl/sec. To optimize atomization, the viscosity below 50cps & solid concentration must be below 30%. The atomization of liquids containing long-chained polymer molecules is problematic, even in diluted form, due to highly cohesive nature of the material. Drop size is primarily a function of frequency, and the higher the frequency, the smaller the drop diameter, E.g. : frequency 20 kHz the drop size is 100 microns & frequency is 40 KHz the drop size is 50 microns. HOW DOES IT WORKS? The Ultrasonic power supply converts 50/60 Hz to frequency electrical energy. This electrical energy is transmitted to the piezoelectric transducer within the converter, where it is changed to mechanical vibrations. The ultrasonic vibrations are intensified by the probe and focused at the tip where the atomization takes place. The liquid travels through the probe, and spreads out as a thin film on the atomizing surface. The oscillating tip disintegrates the liquid into micro-droplets, and ejects them to form a gentle, low velocity spray. SUMMARY OF FEATURES OF ULTRASONIC ATOMIZER From micro-litres to litres – continuous or intermittent Dispenses material with virtually no over spray Pressure-less atomization – low velocity mist Low cost atomization probe replacement Minimal atmospheric contamination Virtually unclog gable Programmable operation Multiple probe operation No heating / No temperature rise   TYPICAL APPLICATIONS Increase of humidity level Coating non-woven fabric, paper, etc… Laboratory spray drying Injection moisture into a gas stream Applying minute amount of oil, fragrance or flavour onto a product Injecting small volume of reagents into a reactor

We are engaged in providing Bakery Equipments, manufactured by our skilled professionals, armed with wide industry-experience and knowledge in this domain. These products are manufactured using topmost raw material with the aid of latest technology and machines in complete compliance with the set industrial standards. The offered products are available in various technical specifications as per demands of our valuable clients. Moreover, the products offered by us are delivered within the promise time frame.