Laboratory Equipment Dealers in Goregaon, Mumbai

Hydraulic bench the tri series is a full range of hydraulic equipments for the drawing of tubes or rods with circular cross section or complex profiles, capable of meeting very high quality standards and delivering a precise final product. features gplc controlled joy sticks controlled adjustable speed traction hydraulic opening and closing of pliers safe openings of pliers quick replacement of jaws traction in line with the drawing hole easy to use optional opposite bench compliance with the required standards explanation the tri series is a full range of hydraulic equipment for the drawing of tubes or rods with circular cross sections or complex profiles, capable of meeting very high quality standards and delivering a precise final product. Technologically advanced, thanks to the use of prime selected components and innovative design solutions covered by patent, the tri drawing benches are fully plc-controlled both for working phases and safety protection; the pliers carrying truck is perfectly aligned with the drawing hole in order to avoid the formation of bending effects on the metal structure. The speed of traction is adjustable and the use of the bench is extremely simple via the use of a joystick on the control panel which allows the operator to manage all the steps of the process easily. Replacement of the jaws is immediate and is achieved through a system of fast anchorage. The tri series has a very compact design with a total length of about 1.5 meters beyond the useful working draft, and each model may be equipped with an opposite bench for the use of anchored spindles.

• No. of tap counts: 10, 500, 1250
• No. of taps (user mode): 1 to 9999

Bulk density apparatus Tap height: USP I : 14 mm - 2 mm, USP II : 3 mm - 0.2 mm. Taps minute: USP I : 300 mm - 15, USP II : 250 - 15. Type of drive: Direct drive with stepper motor.

A famed name, the company is entrusted with a task of making available high quality lot ofFractional Distillation Unit On Assemblyly. Our organization has worked diligently to create a well-organized supply network. Thus, patrons can order the goods in wholesale and expect timely arrival of consignments.   Technical Information : Lower than any other industrial glass Manufactured using the Borosilicate Glass 3.3 Abbreviation for the coefficient of linear expansion - (3.3 ± 0.1) x 10-6 K-1 Maximum working pressure for a given operating temperature is greater Since this glass expands less, the tensile stresses in the glass wall during heating are less High ability to thermal shock Special property of Borosilicate Glass 3.3, complemented by the use of other highly corrosion resistant materials such as PTFE and ceramics Sizes Available - DN25 to DN450 mm Raw Material Used - Borosilicate glass Special Features : Excellent corrosion resistance to very large number of chemicals, unmatched by other material Smooth pore free surface Clear visibility

• Application: Laboratory Use
• Voltage: 220-240V AC
• Number of Holes: 16
• Model Name/Number: ECO 16
• Hole Size: 14 x 16mm Dia & 2 x 22mm dia
• Display Type: Digital
• Temperature: Up to 160 Deg C
• Features: Automatic shut off with acoustic signal

• range: 1 µl to 2,500 µl.

The patented Reference pipette is synonymous with pipetting accuracy, a smooth stroke, a compact and robust design and superior operating comfort. One multifunctional button operates measuring stroke and blow-out as well as ejects the tip. There are 9 adjustable-volume models to cover the range from 0.1 µl to 2,500 µl, and 16 fixed-volume pipettes are available for the range from 1 µl to 2,500 µl.

Aggregate crushing value apparatus, As Per IS 9376 to 1979 & IS 2386 (Part IV)-1963. For measuring resistance of aggregates to crushing. It is useful for 38" to 34" aggregate. Consist of a 150mm +- 0.5mm Diameter x 130mm to 140mm High open ended steel cylinder with base plate of 200 to 230mm²x 6mm thick and a plunger of 148mm +- 0.5mm Dia x 100 to 111.5mm High.

• Material :: Polycarbonate

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.  

• Dia: 8.5 cm x 12 cm

This apparatus is meant for determination of softening point of bituminous materials. The Apparatus consists of a Glass Beaker of Heat resistant Glass of Internal Dia 8.5 cm x 12 cm Depth (Approx.), Two steel balls each of 9.5 mm Dia, Two Tapered Brass Rings, Two ball Guides, Ring Stand and a hand stirrer.

Single Channel ECG Recording. Last Memorized ECG recording & additional copies available. Automatic and Manual recording modes. Dual Power Supply: Mains and battery Operation. Thermal Printing on 50 mm paper. Compact design, light-weight & portable.

As per IP 33, 170, IS 1448 (P-20) For determination of flash point of petroleum products and mixture having a flash point below 49° (120°F.)

Digital antibiotic zone reader determines strength of antibiotic materials by measuring diameters from 0 to 80.0 mm of inhibited zones in petri dishes. Agar in petri dish is inoculated with bacteria, and then sensitivity dishes are dispensed onto dish. After incubation , bacterial growth covers dish except for circular inhibited zone around each disc. Zone diameter is a fiction of antibiotic strengh. Light from base passes up through transparent &semitransparent portions of agar. Adjustable rubber belt sliding , facilitates positioning of dish relative to light source. Light then passes Technical Specification Digital Display 4 digit (9999 max). Dish Size 110mmdia. Magnification 100 mm. Standard Accessaries - Marking pen, Magnifier Lense Holder. to reflecting mirror which reflects image, on glass prism with horizontal line mark on it. Arc from one edge of circle zone is adjusted tangent with line on viewing glass by the “slider knob”. Now hold the left side knob & turn the right side dial & adjust zero.Then entire dish is to be moved by turning “slider knob” until are from opposite side of inhibited zone is brought tangentto same line. Take down the reading from the dial.

• Type: Distillation Apparatus
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White, Shiny-silver, Silver, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Capacity: 20L/Hr
• Power: 0-5kw, 10-15kw, 5-10kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1yrs
• Application: Steam Distillation, Water Distillation
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Color: Silver
• Automatic Grade: Manual
• Speciality: 7 Station apparatus, Vertical diffusion cells availablke in 5, 7.5 and 12.5 mt sizes, Ergonomically designed to save bench space, 10 programmable prtocols with 12 sample intervals, Staggered timer function allows the sampling interval time to be equa

features:   optimum size for storing all your stationery 3 layers of storage   material: polypropylene (pp) dimension (in mm): 215x98x44(l*w*h) weight: 105 grams .

• Capacity: 2 ltrs per hr, 4 ltrs per hr, 6 ltrs per hr, 8 ltrs per hr, 10 ltrs per hr
• Load: 1.5 KW, 3.0 KW, 4.0 KW, 6.0 KW, 8.0 KW

-The unit is recommended for making pyrogen free distilled water of a very high degree of purity. -Made out of S.S. special kettle element is fitted with Ejection Device Auto Cut for safety of the element in case water supply is stopped. - The cock fitted to the unit is of brass C.P. A wall mounting clamp is provided with the unit but without rubber tubing. -Supplied with cord and plug to work on 220230 volts A.C.

• Brand Name: Sanipure
• Packaging Type: Wooden, Carton, Corrugated Box, Plastic Wrap
• Product name: Stainless Steel Drain Strainers
• Material type: Stainless steel
• Min order Qty: 1pc
• Size in inch: 1/2 , 3/4 , 1 , 2 , 3
• Surface treatment: polished
• Installation type: Floor mounted
• Tensile strength: 100-300 Mpa
• Features: Aesthetic look  Corrosion-free Precision made Smooth surface finishing Highly durable Easily washable Cost-effective

Gas chromatography is used to describe the group of analytical separation techniques used to analyze volatile substances in the gas phase. In gas chromatography, the components of a sample are dissolved in a solvent and vaporized in order to separate the analytes by distributing the sample between two phases: a stationary phase and a mobile phase.