Laminate Sheets Dealers in Bhuleshwar, Mumbai

With many years of industrial experience, Saurashtra Mill Stores brings forth an elite array of Rubber Sheet, which is available with us in high flexibility, strength, dimensional accuracy and many other features. Additionally, our comprehensive array of Industrial Rubber Sheet also provides low permanent set features and good twisting qualities at low temperature. However, natural rubber is not suggested for outdoor applications where utmost conflicts to sunlight, ozone, heat aging or oxygen are key aspects. All these sheets are available in varied sizes, shapes and specifications. It is made carefully and in a proper way to suit the requirements of various industries. So, we are enlisted amidst our clients as one of the renowned Manufacturers, Exporters and Suppliers of Conveyor Rubber Sheet from India. Features of Industrial Rubber Sheet

All Brands in various thicknesses ( 0.8, 1.0, 1.5 mm ), finishes (glossy, matt, plain, SF and textured) in ( Brush, Embossed, Fabric, Feather, Fusion, Geometrical, Leather, Pellets, Raw and Sawn Wood, Smoked, Stone, 3D etc. including Imported metal foils and highlighters ). Masking Tapes: Birla 3M, Abro Tape, Both side adhesive tape.

G-10 (named after the NEMA grade of the same name) is a fiberglass laminate composite material that was first introduced in the 1950s. It is an electrical insulator of high tensile strength meant to withstand high pressure. NEMA G10 is defined as being a combination of continuous filament-type glass cloth with epoxy resin binder. G-10 sheets are usually a few millimeters thick. TUFFLAM G10 materials are available in various thicknesses from 0.5mm to 70mm. Our G-10 Glass Epoxy Sheets are used in a variety of applications.   G-10 manufacturing The manufacturing of G-10 is similar to standard phenolic and carbon fiber laminates. Tufflam® G-10 is produced by either Wet Laminate process or by Prepreg process. As no filler is used during the manufacture of Tufflam® G-10, the manufacturing results in a natural green colour (or natural yellow, depending on the type of resin used).   Properties of G-10 Laminates G-10 has a high mechanical strength, good insulation resistance, dielectric loss, and dielectric strength under dry and humid conditions”. G-10 is also impervious to liquids like water and kerosene. When faced with economic constraints, phenolic resin and/or fillers may be used. Such phenolic/impure G-10 laminates are ideal for lower temperature classes, but fail when continuously used at elevated temperatures. Pure G-10 fiberglass epoxy composite, on the other hand, can easily overcome these problems, offer superior electrical and mechanical properties, and also work consistently at temperatures like 155° and 180° C. G-10 can also attain flame-retardant properties via processes like bromination. Flame-retardant G-10 is often called as FR-4 insulation. G-10 Designs and Customizations Decorative variations of G-10 can be produced in many patterns and colours. Such customized designs are used to make handles for knives, grips for firearms, etc. These can be textured (for grip), bead blasted, sanded or polished. G-10 also finds use in windsurfing, as it is resistant to impacts. NEMA G-10 is usually preferred in its natural green, natural yellow or black colours. Other custom coloured laminates can be prepared by introducing pigments of the desired colour during the manufacturing process.   At SAM Associates, we manufacture G-10 glass epoxy laminate sheets and products, custom-fabricated to cater to the specifications and needs of every client. To know more about this thermoset rigid laminate, or to receive our lowest quotations, press the button 

Lead Rubber Sheet Supplier in India. Based in Mumbai, we are one of the largest supplier of Lead Rubber Sheet, Phenolic Laminated Sheet, PVC Rigid Sheet, HDPE Sheet, Acrylic Rod, Nylon Rod, PP Rod, Delrin Sheet, ABS Sheet etc. We supply all over india.

• Color: Brown
• Feature: Wear Resisting
• Thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 0.5-100 mm,0.5-100 mm,1mm,2mm,3mm,4mm,5mm
• Tensile Strength: 6,500 - 7,000
• Size(FeetXFeet): 4 x 4
• Flexural modulus: 11- 13

• Thickness: 4-10 mm
• Usage/Application: Furniture, Cabinets, Wardrobe
• Brand Name: Timex Mica
• Material: Sunmica
• Type: 8 x 4 Feet
• Surface Finish: Glossy, Matte, SF, Textured
• Design Type: Decorative
• Hardness: 20-70 A

  Description Fabric based Laminated Sheets Phenolic Resin Bonded Cotton Fabric Laminates: (SRBF)   Phenolic Resin Bonded Cotton Fabric Laminates are used where mechanical strength, wear resistance and resilience are more important than electrical insulation . Typical applications of fabric laminates are gears, textile shuttles, bearings, pickers, bushes and marine application. Different grades are offered to suit specific applications. We provide customised (special items) on request; as per your drawing or as per your sample;

• Color: Natural
• Finish: Rustic, Satin Matte, Glossy
• Size/Dimension: 1024/1040 Feet
• Brand Name: Paras

• Thickness: 3 mm - 50 mm
• Pattern: Plain
• Material: Paper 
• Color: Brown
• Size: 4ft x 4ft

• Color: Brown
• Feature: Wear Resisting
• Thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 0.5-100 mm,0.5-100 mm,1mm,2mm,3mm,4mm,5mm
• Tensile Strength: 6,500 - 7,000
• Minimum Order Quantity: 10 Kilogram
• Size(FeetXFeet): 4 x 4
• Flexural modulus: 11- 13

We offer high quality phenolic fabric sheets and paper sheets for various industrial requirements. Fabric Sheets:We offer cotton phenolic sheets for various industrial requirements. These are designed as per : IS (IS 2036-1995 ) / BS (BS 2572) - F1, F2, F3 & F4. European Standard  EN 60893-3-4-1995- PF CC201, 202, 203 & 204. NEMA Standard L1 1-2001 - NEMA-C, CE, L & LE. German Standard DIN-7735 - HGW-2082, 2082.5, 2083, 2083.5. Paper Sheets:Our range of phenolic paper sheets are available as per : IS (IS2036-1995) / BS (BS 2572)- P1, P2, P3 & P4 European Standard EN 60893-3-4-1995 - PF CP201, 203, 204 & 206 NEMA Standard LI 1-2001- NEMA- X, XP, XX & XXX German Standard DIN-7735 - HP-2061, 2061.5, 2061.6, 2062.8 Australian Standard AS 1795-1983 - Type X Meter Panel

• Shape: Rectangular
• Size: 8L x 4W Feet
• Thickness: 3.6 mm
• Usage/Application: Interior Decoration
• Surface Finish: Glossy
• Features: Waterproof
• Material: Veneer

We are well-reckoned amidst the stupendous Industrial Sheets Suppliers in India. The Decorative Steel Sheets are also available in array, sourced from reliable vendors ensuring availability of no alternative in the market. The use of optimum quality materials in the manufacturing makes the sheets highly durable, tensile and resistivity to adverse conditions. Additionally, customers are eased with the availability of the Designer Steel Sheets in varied sizes, dimensions and designs as per the specifications and drawings provided. Product Description Standard sizes, Coil form, Cut to length Thickness : 0.5mm to 100mm(heavier on request) Width available : 1000/1250/1500/2000mm Length available : 2500/3000/5000/6000mm, Coil from also available to provide customer specific length

The company makes available the best quality laminate sheets to its precious patrons. We, at Hyatt Timber Supplying Company, cater a huge variety of products such as Decorative Laminates, decorative veneers, decorative laminates sheets and so on and so forth. Being of superior quality in nature, they have extra strength and endurance. These sheets need the barest minimum maintenance and are also available in branded and non branded Chinese. In addition to this, we are considered as one of the most distinguished decorative laminates sheets suppliers company in India. Decorative Laminates : More commonly known as "SUNMICA", are being widely used in furniture fabrication. It is a very good substitute to paints, varnish, veneer, melamine and furniture foil because of its durability. It is available in various beautiful designs like wood veneer, plain colors, fancy designs. It is also available in embossed finishes like leather, jute, stone, cane, fabric & natural fine lines. The latest trend is real fabrics and real metal clad laminates in various embossed and different metals like copper, aluminium and bronze. Standard Size : 8' x 4' (2440 mm x 1220 mm) Thickness : 0.8mm upto 1.5mm Grade : Standard HPL, Postforming, Compact Laminates, Industrial Laminates & Anti-Static Laminates Applications : Furniture, Ceiling, Partition, Cupboard Shutters, Kitchen Cabinets, Railway, Airplanes, Shipping, Bank Counter stands & also has vast use in Industrial Grades like gears, Switchboards and many more..

• Shape: Rectangular
• Length: 4 Square Feet
• Width: 3 Square Feet
• Thickness: 3-4 mm
• Finish Type: Glossy
• Usage: Furniture
• Minimum Order Quantity: 100 Square Feet

We offer our clients with industrial sheets that are designed to withstand tremendous temperature and pressure in industry applications. Stringently tested for their material traceability and durability, these sheets are offered to our clients as per national and international standard & specifications. We are Stockholder & Distributors of Boiler Quality, Pressure Vessel, High Tensile Steel Plates in Grades -S355J2G3, S355J2G3+N, ST52-3, ST52-3N, S355J2H, S355J2+N, ST52.0, E355, P355N,  S355JO, High Temperature Service:SA515 Grade 70, SA515 Grade 60 Low Temperature Service :SA516 Grade 70, SA 516 Grade 60, ASTM A515 Grade-70, ASTM A515 Grade-60, ASTM A516 Grade-70, ASTM A516 Grade-60, SA537 Class 1, SA537 Class 2,  ASTM A537 Class-1, ASTM A537 Class-2Hardox 400, Hardox 450, Hardox 500, Plates RAEX 400, RAEX 450, RAEX 500, FORA 400, FORA 450, FORA 500ABRAZO 400, ABRAZO 450, ABRAZO 500NICRODUR 400, NICRODUR 450, NICRODUR 500, BRINAR 400, BRINAR 450, BRINAR 500DUROSTAT 400, DUROSTAT 450, DUROSTAT 500,  Following are some of the details of these sheets:   Material Grade: Stainless steel, nickel alloys, carbon steel, alloy steel, other ferrous & non-ferrous metals Types: Sheet, Plate, Strips, Round Bar, Wires, Flat Bar, Hexagon Bar, Square Bar, U-Bar, Channel and Angel

Asbestos laminated sheets are moulded from asbestos cloth with thermosetting resins and are specially developed for engineering applications. The high content of asbestos, superior grade of binder and special press-curing techniques impart high degree of mechanical strength. These materials are hard wearing, heat resistant and unaffected by a wide range of chemicals and solvents.     Special Characteristics Compestos  materials do not require specials lubricants. They are compatible with water emulsions, many chemicals and normal lubricating oils, grease, compounds, molybdenum di-sulphide paste etc.Compestos materials are characterised by the following outstanding properties: Excellent dimensional stability Good wear and chemical resistance Low moisture absorption Very high strength to weight ratio High temperature resistance High impact resistance Excellent irradiation characteristics Impervious to effects of moisture of marine exposure Resistant to vermin attack. These outstanding properties make compestos superior to conventional materials for application involving bearings, wearing pads, gears and other rotating or reciprocating parts. GRADE LS 30 This is the General purpose laminated Sheet having a dry lubricating incorporated evenly throughout the structure which lowers the co-efficient of friction and imparts self lubricating properties. LS 30 can be effectively used under widely differing conditions, involving: High surface speed with lighter loads or low speeds with heavy loads, Parts subjected to high stresses, Situations where by normal methods is difficult, intermittent or indeed impossible, Situations where corrosive conditions, electrical conductivity etc. rule out the use of metals. GRADELS 10 This is a special application Laminated Sheet, having relatively high co-efficient of friction. Grade LS 10 is an Effective replacement for Grade LS 30 where frictional forces are minimum and external lubrication is possibleDue   to   its   good   electrical   resistance   and   antistatic   nature,   it   is   used   as   a   flooring   material   in   railways. APPLICATIONS Bushes, Bearings, Wear Strips, Centre Pivots, Rubbing Pads, Thrust Washers, Doctor Blades, Compressor Blades and Rotor Blades, Seatings, Guides, Facings, Slides, Valve Discs, Tread Plates, Pump Rings, Impellers and Gears. RANGE OF SIZES LS30 and LS10 are both available in sheet size of 1000mm x 1000 mm. and in the thickness range of 3.0 mm to 51.0 mm. Sheet sizes other than 1000mm x 1000mm. can also be supplied if production volume and constraints permit.

• Material: Wooden
• Thickness: 1mm
• Color: Brown
• Size: 8 x 4 feet (LxW)
• Country of Origin: Made in India
• Surface Finish: SF