Lap Joint Flanges Dealers in Kamathipura, Mumbai

• Specification: ASTM, ASME B16.5, ASME N 16.47 SERIES
• Stainless Steel: SS 304 ,316,316 L, 316 Ti ,317 L, 310, 321H, 347H, 410 ,904 L, A 453 GR 660 A/B/C
• Super Duplex Steel: UNS S31803 UNS S32205 (F 51), UNS S32750 (F 53), UNS S32760 (F 55), UNS S31254 (SMO 254).

We are instrumental in providing excellent quality Lap Joint Flange which is practically identical to a slip-on flange except it has a larger radius at the intersections of the bore and flange face. It is used with their associated stub end. High Nickel Alloys : Monel 400 , Monel K 500 , Incoloy 600 , Incoloy 625 , Incoloy 800H , Incoloy 825, Incoloy 718, Inconel X - 750, Alloy 20 (CB 20) , Hastelloy C 276 , Hastelloy C 22 , Hastelloy C4. Other Alloys : Titanium Gr 2 , Titanium Gr 5, Aluminium Bronze (AB 2) , Phosphorous Bronze (PB).

Lap joint Flanges Size: 12"NB TO 24"NB Lap joint Flanges Standard : Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc Lap joint Flanges Grade: Stainless Steel Lapped Joint Flange: ASTM SA 240 Grade : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Lapped Joint Flange: S 31803 , S 32205. Alloy Steel Lapped Joint Flange: ASTM SA 387 Grade 159112291 Carbon Steel Lapped Joint Flange: ASTM A 36, IS 2062 Low Temperature Carbon Steel Lapped Joint Flange: A 516 GR.70

Lap Joint flanges are used on piping fitted with with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap.   Material:               Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276 Size : 1/8" NB TO 48"NB. Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #. Standard:                ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48                DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656,                DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,                DIN2637, DIN2638, DIN2673                B.S : BS4504 , BS4504, BS1560, BS10 Advantages of Lap Joint Flanges: Lap Joint flanges have certain special advantages over other flanges. These are as follows: Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes. Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges. In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use. The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges. The Lap Joint works as a backing ring on the stub. The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed. They allow rotational alignment capability.

• Thickness: 30-40mm
• Finishing: Polished
• Packaging Type: Shrink Wrapping
• Inner Diameter: 20-40mm, 40-60mm
• Usage: Industry Use
• Specialities: Strong Construction

• Material: Stainless Steel
• Surface Finishing: Polished
• Shape: Round
• Color: Silver
• Usage: Pipe Fittings
• Packaging Type: Box
• Specialities: High Quality
• Country of Origin: India

• Finishing: Polished
• Feature: Durable, Fine Quality
• Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605
• Special Alloy Lap Joint Flanges: Duplex, Super Duplex, Nickel Alloys
• Stainless Steel Lap Joint Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
• Alloy Steel Lap Joint Flanges: ASTM A182 F1, F5, F9, F11, F22, F91

Item Code : LapJointFlanges. We Prashaant Steel , are one of the leading manufacturer , Exporter and supplier of Lap Joint Flanges.Pressure Ratings : Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.Carbon Steel Lap Joint Flanges : ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8Specifications : ANSI B16.5 Lap Joint Flange 150lb ASME SB16.5 Lap Joint Flange 150lb ANSI B16.5 Lap Joint Flange 300lb ASME SB16.5 Lap Joint Flange 300lb ANSI B16.5 Lap Joint Flange 400lb ASME SB16.5 Lap Joint Flange 400lb ANSI B16.5 Lap Joint Flange 600lb ASME SB16.5 Lap Joint Flange 600lb ANSI B16.5 Lap Joint Flange 900lb ASME SB16.5 Lap Joint Flange 900lb ANSI B16.5 Lap Joint Flange 1500lb ASME SB16.5 Lap Joint Flange 1500lb ANSI B16.5 Lap Joint Flange 2500lb ASME SB16.5 Lap Joint Flange 2500lb

• Brand Name: SKYLAND
• Size: 0-1 inch, 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch, >30 inch

The raw material that is used for manufacturing superior grade products is sourced from the reliable places after complete quality confirmation. Owing to our expertise in the domain, we are able to supply excellent quality Lap Joint Flange at very reasonable price.

• Size: 1/2-36 Inch
• Material: Metal
• Shape: Round
• Thickness: 5-10mm
• Packaging Type: Box
• Standard: EN Flanges Etc.
• Specialities: High Quality
• Dimensions: ANSI/ASME B16.5, B16.47 Series A & B, BI6.48, BS4504, BS 10, EN-1092, DIN, etc.
• Class / Pressure: I50#, 300#, 600#, 900#, 1500#, 2500# PN6, PN10, PN16, PN25. PN40, PN64 etc .

Material Stainless Steel Alloy Steel Carbon Steel Aluminum Brass   Special Grades 2205 Duplex CUNI 90/10, 70/30 Copper Nickel 904L Stainless Steel Monel 400 Inconel Alloy 20 201/201 Stainless Steel 304/304L Stainless Steel 310S Stainless Steel 316/316L Stainless Steel 317L Stainless Steel 321/321H Stainless Steel 347/347H Stainless Steel

High Nickel Lap Joint Flanges of lap joint flanges. Lap joint flanges are used in those piping, which are fitted with the lapped pipe or with the stub end lap joint flanges. The lap joint flanges are highly suitable for those systems, which require dismantling for inspection and cleaning. Swivel flanges and align bolt holes have the ability in easing the erection of large diameter.

Lap Joint Flanges

We are supplier and exporters of industrial carbon steel lap joint flanges in the market. Extremely strong and durable with curved radius and bore holes the carbon steel lapped joint flanges we offer are made using high quality raw materials. Carbon steel lap joint flanges joint is favored in low pressure applications because it is easily assembled and aligned. Used in a variety of industries where the joints are opened on frequent intervals for cleaning the carbon steel lap joint flanges are available in variety of sizes and dimensions. properties: • unbreakable • cost-effective • tensile strength • highly durable • light weight • leakage proof applications: • cement industries • paper industries • autom • chemical industry • oil and gas • size : 12"nb to 48"nb in standard: asa 150, asa 300, table d,e,f,h, din, nd-6,10, 16, 25, 40 etc. specifications as per the international standard: • astm, asme, api, aisi, bs, ansi, din, jis, mssp, nace materials : carbon steel lap joint flange – cs lap joint flange astm a105 lap joint flange. astm a350 lf2 lap joint flange

• Size: 1" - 60"
• Material: Alloy Steel, Stainless Steel, Carbon Steel
• Shape: Round
• Color: Silver
• Standard: ASTM, ASME, ANSI, DIN, EN, BS etc.
• Dimension: B16.5, BS4504, EN-1092, BS 1560, BS 10, IS 6392, B 2.1 NPT, API, JIS
• Class: PN6, PN10, PN16, PN25, PN40, PN64, 150#, 300#, 600#, 900#, 1500#, 2500#

We are one of the major manufacturers and exporters of Lap Joint Flanges in the market. Extremely strong and durable with curved radius and bore holes the Lap Joint Flanges we offer are made using high quality raw materials. Used in a variety of industries where the joints are opened on frequent intervals for cleaning the Lap Joint Flanges are available in variety of sizes and dimensions. Properties : Unbreakable Cost-effective Tensile strength Highly durable Light weight Leakage Proof Applications : Cement Industries Paper Industries Automobiles Chemical industry Oil and gas   Our Main Sales Location Australia, Belgium, Canada, France, Germany, Italy, Netherland, Saudi Arabia, Singapore, Spain, Turkey, UAE, United Kingdom, USA.

This is again similar to a slip-on flange, but it has a radius at the intersection of the bore and the flange face to accommodate a lap stub end. The face on the stub end forms the gasket face on the flange. This type of flange is used in applications where section of piping systems need to be dismantle quickly and easily for inspection or replacement.

• Material: Alloy Steel, Stainless Steel
• Shape: Round
• Thickness: 10-20mm, 30-40mm
• Certification: ISI Certified
• Color: Grey
• Application: Pipe Joints
• Grade: AISI, BS, GB

• Material: Stainless Steel
• Shape: Round
• Thickness: 20-30mm
• Color: Grey
• Finishing: Polished
• Packaging Type: Bubble Wrapping

Buyers can obtain our Stainless Steel 304l Lap Joint Flanges in different specifications as per their requirements. Our Stainless Steel Lap Joint Flanges are reasonably priced and ready for prompt delivery.   Specifications: Size : 1/2'' to 48'' Type : WNRF, BLRF, LWNRF, SORF, SWRF SS 304 Stainless Steel Lap Joint Flange. SS 316 Stainless Steel Lap Joint Flange SS 304L Stainless Steel Lap Joint Flange. SS 316L Stainless Steel Lap Joint Flange. PN 16 Lap Joint Flange. PN 40 Lap Joint Flange. PN10 Lap Joint Flange.

• Brand Name: Maxell Steel & Alloys
• Material: Carbon Steel, Alloy Steel etc.
• Place of Origin: Mumbai  
• Unit: Trader
• Packaging: Bulk

We are offering Lap Joint Flanges. Material: Carbon Steel : ASTM A 105, ASTM A 181 Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91 Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276 Copper Alloys : Copper, Brass & Gunmetal Size : 18" NB TO 48"NB. Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #. Standard:ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S : BS4504 , BS4504, BS1560, BS10

• Material: Stainless Steel
• Size: 1-5 inch,5-10 inch,10-20 inch,0-1 inch
• Application: Pipe Fitting
• Thickness: 5 to 10mm
• Rated Pressure: 8 to 10 Bar
• Rated Pressure (Bar): 150CL TO 2500CL

Our name figures in the list of the topmost suppliers and exporters of Lap Joint Pipe Flanges from Mumbai, Maharashtra, India. We pride in having a team of well-qualified workers, who work hard to cater to the requirements our esteemed clients. While we process the Lap Joint Pipe Flanges using optimum quality materials, we are appreciated for manufacturing the Lap Joint Pipe Flanges with maximum perfection, and clients can purchase the flanges at reasonable rates in the market. The offered Lap Joint Pipe Flanges have a precise design, and excellent finish and these are appreciated for having a lustrous shine, and intricate detailing. Details : This is again similar to a slip-on flange, but it has a radius at the intersection of the bore and the flange face toaccommodate a lap stub end. The face on the stub end forms the gasket face on the flange. This type of flange is used in applications where section of piping systems need to be dismantle quickly and easily for inspection or replacement..