Lap Joint Flanges Dealers in Kumbharwada, Mumbai

ASME Lap Joint Flanges, ASTM Lap Joint Flanges, Stainless Steel Lap Joint Flanges, Duplex Steel Lap Joint Flanges, Monel and Inconel Lap Joint Flanges, Amalgam Steel Lap Joint Flanges Producer and Exporter in India. ASTM/ASME – A 182, SA 182, ASTM B247, B361, Aluminum Lap Joint Flanges, Carbon Steel Lap Joint Flanges, Nickel Compound Lap Joint Flanges, supplier.Shasan Piping Solution is a decided producer of high caliber of mechanical lap joint ribs in India. It is especially like slip-on spine, where it is having a sweep at the intersection of the drag and rib confront that is for to make a lap stub end. Meanwhile, the expression on the stub end shapes out by method for the gasket face on the rib. Lap Joint ribs are being utilized as a part of utilizations where parts of the funneling frameworks should detract from each other rapidly and effectively for investigation and substitution. These lap joint spines are being given in full-scale run and are broadly utilized at all the weights.Range : ½” (15 NB) to 60” (1500NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. available with NACE MR 01-75.Features : Dimensional accuracy High efficiency Corrosion resistance Durable Excellent finish Details : Stainless Steel Standard  - ASTM / ASME A/SA 182 Grade - F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Titanium Standard  - ASTM B381. Grade - Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Duplex Steel Standard  - ASTM / ASME A/SA 182 Grade - F 44, F 45, F51, F 53, F 55, F 60, F 61 Copper Alloy Standard  - ASTM / ASME SB 61 / 62 / 151 / 152. Grade - UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Standard  - ASTM / ASME SB 564 / 160 / 472 Carbon Steel Standard :ASTM A 105/A694/ A350 LF3/A350 LF2. Grade - F42/46/52/56/60/65/70 Low Temperature Carbon Steel - ASTM A 350 LF2 / A350 LF3 Alloy Steel Standard  - ASTM A182 Grade - F1/F5/F9/F11/F22/F91 Nickel Alloy Standard : Nickel 200 – UNS N02200 Nickel 201 – UNS N02201 Monel 400 – UNS N04400 Monel K500 – UNS N05500 Inconel K600 – UNS N06600 Inconel 601 – UNS N06601 Inconel 625 – UNS N06625 Inconel 800 – UNS N08800 Inconel 800H – UNS N08810 Inconel 825 – UNS N08825 Hastelloy C276 – UNS N10276 Alloy 20 – UNS N08020

Based in Mumbai, Maharashtra, we are the most trusted manufacturer, exporter and supplier of superior quality Lap Joint Flanges that can be availed in multiple material grades such as stainless steel, carbon as well as alloy lap joint flanges. The lap joint flanges supplied by us are pretty much similar to the other flanges but they do not come with a raised face. You can use these flanges in conjunction with the Lap joint stub End. The ability of this flange to hold the pressure is comparatively low and the fatigue is only one tenth when compared to the welding neck flanges. There are a number of benefits of using the lap joint flanges. You can easily swivel around the flanges and this makes the lining up of opposing flange bolt holes easier. There is no proper contact with the pipe this makes them corrosion resistant. Thus, the flanges will not corrode easily and might be salvaged. The size of the flanges can carry from 1/2 "(5NB ) to 48 "(1200NB). Our products can be globally availed by you in safe packaging and at affordable prices.   Specification : Size : 1/2 "(5NB ) to 48 "(1200NB) Standards : ANS B 16.5 , ANSI B16.47 Series A & B , MSS SP44, ASA , API - 605 , AWWA, Custom drawings Pressure Rating : class 150 , Class 300< class 400, class 600, class 900 , class 1500 , class 2500 , PN6, PN10, PN!6 , PN25,PN40, PN64 etc. Carbon Steel Lap Joint Flanges : ASTM  A 105/A105N ,A350 LF1, LF2CL1/CL2,LF3CL1/CL2,LF3 CL1/CL2,A694 F42,F46,F48,F50,F52,F56,F60 ,F65 , F70,F516.60,65,70 (Spectacle Blind flange , Spade flange ) , Steel RST37.2,C22.8 Stainless steel lap joint flanges: ASTM A182 F202,F304?304H,F316?316L,F316TI ,F310,F321,F904L Alloy Steel lap joint flanges : ASTM A 182F1, F5,F9,F11,F22,F91 Special Alloy lap Jooint Flanges : Duplex , Super Duplex , Nickel Alloys Flange face type : Flate face (FF) , Raised face (RF) Ring Type joint (RTJ) coating / surface treatment : Anti- rust paint , Oil Black paini , Yellow transparent , Zinc plated. Cold and Hot dip Galvanized Value added services : CNC Machining Customized flanges

• Finishing: Polished
• Feature: Durable, Fine Quality
• Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605
• Special Alloy Lap Joint Flanges: Duplex, Super Duplex, Nickel Alloys
• Stainless Steel Lap Joint Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
• Alloy Steel Lap Joint Flanges: ASTM A182 F1, F5, F9, F11, F22, F91

Item Code : LapJointFlanges. We Prashaant Steel , are one of the leading manufacturer , Exporter and supplier of Lap Joint Flanges.Pressure Ratings : Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.Carbon Steel Lap Joint Flanges : ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8Specifications : ANSI B16.5 Lap Joint Flange 150lb ASME SB16.5 Lap Joint Flange 150lb ANSI B16.5 Lap Joint Flange 300lb ASME SB16.5 Lap Joint Flange 300lb ANSI B16.5 Lap Joint Flange 400lb ASME SB16.5 Lap Joint Flange 400lb ANSI B16.5 Lap Joint Flange 600lb ASME SB16.5 Lap Joint Flange 600lb ANSI B16.5 Lap Joint Flange 900lb ASME SB16.5 Lap Joint Flange 900lb ANSI B16.5 Lap Joint Flange 1500lb ASME SB16.5 Lap Joint Flange 1500lb ANSI B16.5 Lap Joint Flange 2500lb ASME SB16.5 Lap Joint Flange 2500lb

Based in Maharashtra, India, we are one of the leading manufacturers, wholesale suppliers and exporters of Lap Joint Flanges. We offer Lap Joint Flanges which are premium quality products and are renowned in the market for their durability and high performance. Our Lap Joint Flanges are cost effective and qualitatively superior. These are primarily used when quick assembly and disassembly of pipe line section is required under limited working pressure. We offer the product at market leading prices.   Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : These are primarily used when quick assembly and disassembly of pipe line section is required under limited working pressure.

• Brand Name: SKYLAND
• Size: 0-1 inch, 0-1 inch, 1-5 inch, 5-10 inch, 5-10 inch, 10-20 inch, 10-20 inch, 20-30 inch, >30 inch, >3
• Approx. Price: Rs 250 / Piece
• Material Standard: ASTM A105, ASTM A182, ASTM A182, ASTM A351, ASTM A351, ANSI B16.5

Since inception, we are involved in selling of premium Lap Joint Flange with Stub-End, as we are its top supplier in the marketplace. For the convenience of the clients, we issue an invoice to them including the details of the sale transaction as well as indicating the quantities, products as well as agreed price. Thus, we maintain transparency in our dealings and payment procedures.

Lap Joint flanges are used on piping fitted with with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap. Material:Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276 Size : 1/8" NB TO 48"NB.Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.Standard :ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673B.S : BS4504 , BS4504, BS1560, BS10Advantages of Lap Joint Flanges:Lap Joint flanges have certain special advantages over other flanges. These are as follows: Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes. Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges. In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use. The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges. The Lap Joint works as a backing ring on the stub. The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed. They allow rotational alignment capability.

• Size: 1/2" (15 NB) to 48" (1200NB)
• Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
• Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
• Flange Face Type: Raised Face (RF), Ring Type Joint (RTJ)
• BS: BS4504 , BS4504, BS1560, BS10
• DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629

• SIZE :: From 1/2" to 48"
• CLASS :: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#.
• Feature: Automobile industry Oil & petroleum industry Pipe & fitting industry

The lap joint flange is a class 150 stainless steel 304304L funnel fitting to join two segments of a channeling framework. This lap joint rib has a raised face on its inside side and jolt openings for uniting with level surfaces or different spines. Made of stainless steel 304L, the lower carbon substance of this fitting guarantees consumption resistance. This class 150 fitting meets steel 304 quality models, 304L additional low carbon norms, and particulars ASTM A182, ASME SA182, and ANSI B16.5 for quality certification. Class is a standard identifying with resistance, development, measurement, and divider thickness, yet it is not an immediate estimation of most extreme working weight. Channel fittings are segments utilized for associating, ending, controlling stream, and altering the course of funneling in a wide range of commercial enterprises. At the point when buying funnel fittings, consider the application, as this will influence material sort, shape, estimate and required sturdiness. Fittings are accessible strung or unthreaded, in numerous shapes, styles, sizes, and plans.

Stainless steel lap joint flanges are again similar to slip-on flanges, but it has a radius at the intersection of the bore and the lap joint flanges face to accommodate a lap stub end. The face on the stub end forms the gasket face of the flange. These stainless steel lap joint flanges are used in applications where sections of piping systems need to be dismantled quickly and easily for inspection or replacement.

We manufacture a qualitative range of lap joint flanges that are made in compliance with set industrial standards. These flanges are used on piping fitted with lapped pipe or with lap joint stub ends etc.

We offer lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges.

These lap joint flanges are always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it. This means the stub end or taft always makes the face. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these stub end lap joint flanges and carbon steel lap joint flanges can be supplied without a hub and/or in treated, coated carbon steel.

This Lap joint Flange is highly efficacious and is used in different industries for varied applications. Our Lap joint Flange is made from quality raw material that offers high strength to the structure. Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Usage : It is used when disassembly of pipe line section and quick assembly is required but under limited working pressure.

ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : These are primarily used when quick assembly and disassembly of pipe line section is required under limited working pressure.

We are offering lap joint flanges (lj flanges) are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges

From Maharashtra, we are the reliable Manufacturer, Supplier and Exporter of the Lap Joint Flange across the globe. To keep check with the prevailing industry standards, we maintain tight quality controls right from the procurement of raw materials to their final processing and distribution. Also, we satiate our client’s wishes by doling out the EN Norm Flanges in tailored specifications at unbeatable prices.   Types : Plate Neck Threaded Blind

Lap Joint Flanges Flanges Price Leading manufacturer of Lap Joint Flanges Our Live Stock of Lap Joint Flanges Lap Joint Flanges Application We are a government approved largest Manufacturer, Supplier and Exporter of Lapped Joint Flanges, ASME 16.5 Lap Joint Flanges. Lap joint pipe flanges slide directly over the pipe and are most commonly used with stub end fittings. A pipe is usually welded to the Stub End and the Lap Joint pipe flange is free to rotate around the stub end. The benefit of this is that there will not be any issues with bolt hole alignment. Lap Joint pipe flanges are often used for applications that require frequent dismantling. A Lap joint Flange is very similar to a slip-on flange, with the main difference being that it has a curved radius at the bore and face to house a lap joint stub-end.Lap Joint Flanges are available in following specifications:

• Size: 1" - 60"
• Material: Alloy Steel, Stainless Steel, Carbon Steel
• Shape: Round
• Color: Silver
• Standard: ASTM, ASME, ANSI, DIN, EN, BS etc.
• Dimension: B16.5, BS4504, EN-1092, BS 1560, BS 10, IS 6392, B 2.1 NPT, API, JIS
• Class: PN6, PN10, PN16, PN25, PN40, PN64, 150#, 300#, 600#, 900#, 1500#, 2500#

We are one of the major manufacturers and exporters of Lap Joint Flanges in the market. Extremely strong and durable with curved radius and bore holes the Lap Joint Flanges we offer are made using high quality raw materials. Used in a variety of industries where the joints are opened on frequent intervals for cleaning the Lap Joint Flanges are available in variety of sizes and dimensions. Properties : Unbreakable Cost-effective Tensile strength Highly durable Light weight Leakage Proof Applications : Cement Industries Paper Industries Automobiles Chemical industry Oil and gas   Our Main Sales Location Australia, Belgium, Canada, France, Germany, Italy, Netherland, Saudi Arabia, Singapore, Spain, Turkey, UAE, United Kingdom, USA.