Leak Detection Instrument Dealers in Saki Vihar, Mumbai

Model 2620 single channel digital control modules are designed to supervise and display the status of a single integral or remote (2620 R) sensor assembly. Model 2620 is housed in a NEMA AX wall mount enclosure or Ex- proof enclosure. Model 2620R Single Channel controllers interface with industry standard two or three wire 4-20 mA sensor or other standard voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarm levels. The 3 J4 digit LCD or Alphanumeric LCD display can read the concentration. LEDs on the front panel provide indication of all three alarms. The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps, to provide direct alarm action, reducing the need for interposing relays. Local Alarm devices can be connected to the configurable on board alarms. The Fail Safe Supervisory provides a reliable indication that the Monitor is fully operational. I he "hail Safe" design monitors the input power and status of the power supply for the amplifiers. A failure of any one of these functions illuminates a "Fault" Light Emitting Diode. The HEART of any Analytical system is the SENSOR. It is the most critical component in overall system performance. Because no single sensor technology is ideal for all applications, ENDEE offers TEN different sensor technologies. This capability is mandatory in today's complex industrial market. Command of each of these technologies enables us to "FITTHE PRODUCTTO THE APPLICATION", and assure long-term service and reliability & optimal performance in every application. The Monitor is a Single Gas Multi-purpose monitor that combines simplicity and high performance in a low cost low maintenance package. The rugged NEMA 4X or 7X assembly is suitable for a variety of industrial, commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or Oxygen iri Process Fuel Gas or Ambient Air. Fast and accurate response. Long Life Applications Specific Gas Sensor Tech. Solid State Electronics Continuous Monitoring Two Alarm Levels Fail Safe Protection Recorder Output Integra or Remote Sensing Sensor Un-attended Operation Sampling by Diffusion or sample Draw Pump. Flexibility to fit your application needs Interfaces with Industry Standard Transmitters. The HEART of any Analytical system is the SENSOR. It is the most critical component in overall system performance. Because no single sensor technology is ideal for all applications, ENDEE offers TEN different sensor technologies. This capability is mandatory in today's complex industrial market. Command of each of these technologies enables us to "FITTHE PRODUCTTO THE APPLICATION", and assure long-term service and reliability & optimal performance in every application.

Advanced Metal Detection in Pharmaceutical Tablets Designed to meet the exacting standards and regulations of the pharmaceutical industry, METTLER TOLEDO Safeline pharmaceutical metal detectors provide the ultimate solution in fully integrated product inspection and rejection systems for tablets, capsules, powders and granules. Our metal detection systems are designed to detect all metal contaminant types, including ferrous, non-ferrous and even the most difficult-to-detect non-magnetic stainless steels.

Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors

Flame and Gas Detection systems withwithout SIL certified controlling & PLC conforming IEC 61508.These systems are also supplied wireless communication using HART ISA 100 GSM wireless.Metal Oxide Semiconductor Detectors.

The HNL Flame Detector is a compact and highly responsive Flame / Fire Detector. The Unit incorporates an extremely sensitive sensing circuit that responds to high energy sources in a bandwidth of 185 – 260 nm with optimum spectral sensitivity centred around 200 nm.Thus HNL Flame Detector is the most effective in early detection of a fire before they can possibly cause damage. In contrast, other types of detectors operate at a disadvantage. Smoke detectors do not operate until the fire has developed into a sufficient size to accelerate smoke along with strata of hot air rising to the detector.It is particularly suitable for use in outdoor applications because it is not affected by wind or rain. Various modelsto detect & control the presence or absence of flame are available.

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

• Brand Name: GFG
• Gas Type: Combustible Gas
• Brand Name: GFG
• Detector Features: Adjustable Sensitivity
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Display Type: Digital

The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box

• Country of Origin: India
• Type: Veterinary Instruments
• Material: Stainless Steel
• Application: Veterinary Use
• Color: Black
• Feature: Best Quality, Easy To Use, Fine Finished, Rust Free Nature
• Surface Finishing: Polished
• Opening Style: Single
• Instruments Type: DETECTOR
• M.R.P. / PIECE: 10125.00rs

• Model Name/Number: C7027A1049
• Brand: Honeywell
• Operating Temperature: Minus 18 deg.C to 102 deg.C, or Minus 40 deg.C to 102 deg.C
• Max. Pressure Rating: 5 psi
• Mounting: Collar with 1/2-14 NPSM internal threads for mounting on a 1/2 in. sight pipe
• combustion controls/amplifiers: R4341/R7323, R4343/R7323, R4344/R7323

• Type: Lpg Gas Leak Detector
• Material: ABS Plastic
• Certification: CE Certified
• Feature: Easy To Use
• Condition: New
• Display Type: Digital
• Warranty: 1Year
• Gas Type: Combustible Gas, LPG Gas, Natural Gas
• Brand Name: Ambetronics
• Voltage: 24VDC
• Sensor: No
• Certificate: CE
• Name: LPG PNG Gas Detector

Hdpe Granules, Plastic Raw Material, Plastic Raw Materials

• Technical Specification: UL / Vds / LPCB approved

We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds

We are offering metal detectors.

Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle  Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.

• Type: Addressable Fire Alarm
• Application: Office
• Brand Name: Ravel, Honeywell, Cooper, Notifier, Morley, Apollo
• Voltage: 24VDC
• Material: MS
• Zones: Multi Loop

• Power Source: Battery
• Alarm Current (A): 3A 
• Battery Life: 10 years
• Voltage (V): 12 v
• Weight (g): 200g
• Shape: Round
• LED Indication: Yes

• Type: Fisher Research Labs Magnetic Locator/Metal Detector
• Features: Affordable, tough, and simple to use while providing maximum performance, Unbeatable performance locating targets near a fence line, Pulsating tone/low battery indication and quick.

MSA Chillgard VRF Refrigerant Leak Detector is the first industry detector for Variable Refrigerant Flow Systems (VRF) with integrated BACnet capability. Therefore, it can be directly connected with any Building Management Systems (BMS). MSA applies its proven Photoacoustic infrared sensing technology that provides a stable zero baseline, minimizes cross-sensitivities and offers low cost of ownership through minimum maintenance required.   Low-level detection at 25 ppm minimum detection Versatility—capable of operating within wide temperature and humidity ranges Low maintenance—no moving parts and stable PAIR sensor technology Easy installation—simply secure back plate to wall 20-year proven photoacoustic infrared sensing technology Digital communications BACnet® Modbus

Fire detectors the fuel and ignition; the Fire Triangle is effectively broken. Hence, the fire stops immediately. However,

• Brand Name: SAFETY PLUS
• Color: Other
• Warranty: 1 Year
• Product Type: Fire Alarm
• Usage/Application: Industrial Premises
• Automation Grade: Manual
• Features: Smoke Detector Wire Type
• Is It Ce Certified: Ce Certified

We are offering toxic gas leak detector. Gas monitoring is an integral part of environmental protection and safety program. We at husaini® engineers design toxic gas leak detectors esp for combustible gases such as chlorine & ammonia. these detector monitors gas leaks for continuous operation in an open or confined are. It provides an audible alarm and visual indication of gas toxicity status. The sensor with alarm are easy to install and are lightweight, self-contained and wall mounted.

• Power Source: Electric
• Color: White
• Automatic Grade: Semi-Automatic
• Alarm Sensor Type: Ionization
• Application: Office Buildings
• Type: Smoke Detectors
• Application: Smoke Detecting
• Color: White
• Feature: Durable, Easy To Install, Eco Friendly, High Sensitivity, Suitable For Various Place
• Condition: New
• Automatic Grade: Semi-Automatic
• Power Source: Electric
• Mounting Type: Roof Mounting
• Product Type: Addressable Smoke Detector

• Power Supply: 230V AC / 24VDC
• Detected gases: Oxygen(O2), Cl2, CO, H2S, NH3, NO2, SO2
• Make: OLDHAM
• Display: LED Display
• Output: 4-20 mA or ModBus RTU outputs, or on-board relays

• Brand Name: Ambetronics
• Condition: New
• Display Type: Digital
• Gas Type: Natural Gas, Combustible Gas, Toxic gas / Oxygen
• Model: GM-2200-Weatherproof
• Power Source: Plug-In
• Detector Features: Adjustable Sensitivity

Microprocessor Based Operation, Digitally Controlled, auto tuning, auto setting.Rugged structure , made from ABS sheet, detachable for ease to install & transport, ABS Plastic molded top and shoes, with provision for screwing shoes to ground. Has aluminum strip with polycarbonate strip-insert on both sides for extra strength and high aesthetics.Detects all Metals, Zinc & Metal Alloys, ferrous / non-ferrous metals using single detection program. Test samples as per IS : 14132 : 1992.Indian NABL approved Lab tested, safe for people with pace makers, pregnant woman, digital devises, magnetic media., tested as per ICNIRP guidelines.    

The robust constructed compact testing device - easy to handle and very effective, designed to fit in any pocket, is also appropriate for harsh industrial environments. The SONAPHONE Pocket accessories include airborne and structure-borne sound probes. You will receive the appropriate probe for your application from our product range, which you can attach to the device with just one simple movement. You do not need much time or expensive training in order to perform the test procedure. Compact ultrasonic meter for preventive maintenance Find leaks and save energy Preventive alarm in case of bearing failure Compact design Easy to use External accessories - wide range of applications   SONAPHONE Pocket finds the problems before they cause serious cost to your company. Only by determining and eliminating leakage points in the compressed air system can energy savings of up to 35% and thus cost savings be achieved. In addition, it ensures the safety and efficiency of industrial processes, for example, by preventing defects in bearings and electrical equipment. Applications of ultrasonic devices: Finding leaks in compressed air, gas or vacuum systems Wear test on rotary equipment Find signs of electrical equipment partial discharge or insulation faults to ensure safe operation Use to test steam lines, save energy, reduce vapor loss and steam system failures Pressure-free systems for compactness testing