Leak Detectors Dealers in Andheri, Mumbai

Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle  Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.

• Technical Specification: UL / Vds / LPCB approved

We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds

The HNL Flame Detector is a compact and highly responsive Flame / Fire Detector. The Unit incorporates an extremely sensitive sensing circuit that responds to high energy sources in a bandwidth of 185 – 260 nm with optimum spectral sensitivity centred around 200 nm.Thus HNL Flame Detector is the most effective in early detection of a fire before they can possibly cause damage. In contrast, other types of detectors operate at a disadvantage. Smoke detectors do not operate until the fire has developed into a sufficient size to accelerate smoke along with strata of hot air rising to the detector.It is particularly suitable for use in outdoor applications because it is not affected by wind or rain. Various modelsto detect & control the presence or absence of flame are available.

• Type: Portable Gas Detector
• Certification: CE Certified
• Color: White, Blue
• Feature: Easy To Use, Portable
• Condition: New
• Application: Gas Detecting
• Display Type: Digital
• Warranty: 1Year
• Gas Type: Combustible Gas
• Brand Name: Ambetronics
• Detected gas: toxic,o2,n2

• Country of Origin: India
• Type: Veterinary Instruments
• Material: Stainless Steel
• Application: Veterinary Use
• Color: Black
• Feature: Best Quality, Easy To Use, Fine Finished, Rust Free Nature
• Surface Finishing: Polished
• Opening Style: Single
• Instruments Type: DETECTOR
• M.R.P. / PIECE: 10125.00rs

• Model Name/Number: C7027A1049
• Brand: Honeywell
• Operating Temperature: Minus 18 deg.C to 102 deg.C, or Minus 40 deg.C to 102 deg.C
• Max. Pressure Rating: 5 psi
• Mounting: Collar with 1/2-14 NPSM internal threads for mounting on a 1/2 in. sight pipe
• combustion controls/amplifiers: R4341/R7323, R4343/R7323, R4344/R7323

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

• Brand Name: GFG
• Gas Type: Combustible Gas
• Brand Name: GFG
• Detector Features: Adjustable Sensitivity
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Display Type: Digital

The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box

The Senscient ELDS laser-based open path gas detector is available for a wide range of toxic and flammable gases. The Senscient ELDS uses 'SimuGas' self-testing to eliminate employees entering hazardous areas for gas checks. Nuisance false alarms are virtually eliminated with its breakthrough Harmonic Fingerprint processing.   Gases detected: hydrogen sulfide (H2S), sour gas (H2S/CH4), methane (CH4), ethylene (C2H4), ammonia (NH3), carbon dioxide (CO2), hydrogen chloride, (HCl), hydrogen fluoride (HF) Gas-specific Harmonic Fingerprint detection eliminates false alarms and prevents plant shutdowns SimuGas automated function checks are recorded daily and eliminate need for manual intervention Tuneable lasers scan more narrow portion of spectrum where water interference from weather conditions are minimized Bluetooth wireless technology and SITE software simplifies commissioning, diagnostics, and event log retrieval Senscient ELDS lasers are hard on fog, rain, and snow but are easy on the eyes with a Class 1 eye-safe designation. Fastest responding device for safety critical ventilation zone and cross duct applications No costly communication cable required between transmitter and receiver Significantly improves the safety, efficiency, and operational costs of your gas detection program

Fire detectors the fuel and ignition; the Fire Triangle is effectively broken. Hence, the fire stops immediately. However,

• Brand Name: Ambetronics
• Color: Grey
• Display Type: Digital
• Model Number/Name: GT-2500-WP_Ammonia
• Gas Type: Toxic - Ammonia
• Sensor Type: Electrochemical
• Mounting: Wall mounting
• Minimum Order Quantity: 1 Piece

• Range: 0
• Material Velocity: 1000
• Dynamic Range: ≥ 32dB
• Vertical linear error: : ≤ 3%
• Horizontal linear error: ≤ 1%
• Resolution:: > 40dB
• Sensitivity Leavings: 60dB – On FBH
• Rejection: 0 to 80 % Linear
• Noise level: ≤ 10%
• Power: DC 9V: Lithium batteries Operation-10hr or more.
• Output: Alarm with sound and light.
• Dimensions: 263 mm × 170 mm × 61 mm
• Measurement cycle: 4 times/SEC, scanning of single point measurement model 20 times per second.
• Weight: 1.5 Kg (with battery)

• Product Type: Fire Alarm
• Brand Name: SAFETY PLUS
• Usage/Application: Industrial Premises
• Color: Other
• Automation Grade: Manual
• Features: Smoke Detector Wire Type
• Warranty: 1 Year
• Is It Ce Certified: Ce Certified
• Model/Type: SAFETY PLUS
• Minimum Order Quantity: 10 Unit

Ideally recommended  for  areas having  large flow of traffic due to large scanning area.Made from high quality ABS  Plastic .Long scanning area  ( 410 mm long ) ,  for quicker detection  in high traffic.Nylon  handle  strap  to hold it  aswell as  Leather belted case for strapping HHMD to belt.

• Brand Name: Cooper
• Automatic Grade: Automatic
• Condition: New
• System Components: Fire Alarm Control Panel,Smoke Detectors
• Body Material: Plastic
• Wall Mounted: Yes

• Application: Bakery products in plastic packets inspection
• Model: MSMD400 (digital version)
• Aperture size: 400mm width x 200mm height.
• Sensitivity: 1.5mm ferrous, 2.0mm non ferrous, 2.5mm stainless steel metals & above. (Sensitivity claimed is without considering the product effect. Actual sensitivity shall depend upon product characteristics.)
• Construction: Stainless steel 304
• Operating voltage: 230vac, 1ph, 50hz
• On board display(Digital Version): Led bar graph 08 key board 20 characterstic x4 lines lcd display Printer facility Pc interface Self test Password protection 100 product memory etc.

  Detect all types of metals ferrous, nonferrous or stainless steel contaminations. Metal Detectors are a vital tool for getting your organization approved or certified for HACCP, FDA, ISO or any other international certification for product Safety.