Leak Detectors Dealers in Marol, Mumbai

• Model: 9206
• Range: 0-100 ppm
• Mounting: Wall Mounting
• Confirming: Confirming IP 65 protection (Encl. Of Polycarbonate with hinged Transparent)
• Demension: 275 (H) x 235 (W) x 115 (D) in mm
• Accessories: Operating-Maintenance manual, and Industrial hooter
• Weight: 5 Kg.
• Optional: Chart recorder, Extra cable for long distance application, Calibration kit, etc.
• Resolution: 0.1 ppm/ + 1%
• Operating Temp: 0.1 ppm/ + 1% . 0 to 50 C
• Response Time: Less then 1 second
• Sensor Type: Solid State

The BID achieves over 200 Xs higher sensitivity for organic compounds over a TCD. In addition, conventional analytical techniques require a GC system configuration with multiple detection schemes to analyze for permanent gases and light hydrocarbons. The use of a methanizer and FID is often required to detect ppm levels of CO and CO2. However, the BID replaces all of this hardware and allows for the highly sensitive detection of mixtures of inorganic gases and light hydrocarbons.

  This model can be connected to blow molding machine offering you a full line production with blowing and leak-detector.   The height or width of the machine can be adjusted subject to the size of bottle.

• Display Type: Digital
• Feature: Water resistant, Compact and lightweight
• Measurement Range: H2S, CO , N, CH4, H

• Model Number: IRD811D
• input: accelerometer IRD521
• Packaging Details: Packed in Corrugated Box
• spike energy: 20gSE,200gSE,2000gSE
• Power requirements: internal battery 2nos of 9v,100mah dry cells
• Frequency range: displacement 300cpm to 24000cpm
• velocity range: 20mm/s,200mm/s,2000mm/s pk
• Display: LCD
• Port: Mumbai
• Product name: IRD811D
• Supply Ability: 10 Set/Sets per Week

Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle  Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.

Continuous Multi Gas Monitoring Complete Automatic Operation. Self Diagnostic Check. Diffusion or Suction Sampling. Backlit Alpha numeric Display. Audio and Visual Alarm. Simultaneous Display of Gas name and Concentration Audible Alarm / Low Battery Warning Buzzer Intrinsically Safe No Scope for user error These Compact, self contained and intrinsically safe designed instrument housed in a weather proof high impact plastic case are powered with a replaceable 4X1.2V Dc battery. On switching 'ON', the instrument goes thorough its complete self integrity check, and displays factory set Warn and Alarm values before indicating 'Ready' for monitoring While in Operation, the instrument monitors the work place continuously giving the latest update concentration of designated Gas through diffusion sampling. Suction sampling is possible with an optional manual or battery operated pump and adaptor. The poison resistant Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross interference filters are gas specific. Optionally the sensors can be mounted on an extension cable for monitoring inaccessible locations before entry. The instruments emits an audible beep every 15 sees that provides confidence to the user that he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous situations.

The HNL Flame Detector is a compact and highly responsive Flame / Fire Detector. The Unit incorporates an extremely sensitive sensing circuit that responds to high energy sources in a bandwidth of 185 – 260 nm with optimum spectral sensitivity centred around 200 nm.Thus HNL Flame Detector is the most effective in early detection of a fire before they can possibly cause damage. In contrast, other types of detectors operate at a disadvantage. Smoke detectors do not operate until the fire has developed into a sufficient size to accelerate smoke along with strata of hot air rising to the detector.It is particularly suitable for use in outdoor applications because it is not affected by wind or rain. Various modelsto detect & control the presence or absence of flame are available.

• Country of Origin: India
• Type: Veterinary Instruments
• Material: Stainless Steel
• Application: Veterinary Use
• Color: Black
• Feature: Best Quality, Easy To Use, Fine Finished, Rust Free Nature
• Surface Finishing: Polished
• Opening Style: Single
• Instruments Type: DETECTOR
• M.R.P. / PIECE: 10125.00rs

• Type: Lpg Gas Leak Detector
• Material: ABS Plastic
• Certification: CE Certified
• Feature: Easy To Use
• Condition: New
• Display Type: Digital
• Warranty: 1Year
• Gas Type: Combustible Gas, LPG Gas, Natural Gas
• Brand Name: Ambetronics
• Voltage: 24VDC
• Sensor: No
• Certificate: CE
• Name: LPG PNG Gas Detector

• Brand Name: GFG
• Gas Type: Combustible Gas
• Brand Name: GFG
• Detector Features: Adjustable Sensitivity
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Display Type: Digital

The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box

Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Smoke Detector Camera. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.

Hdpe Granules, Plastic Raw Material, Plastic Raw Materials

• Technical Specification: UL / Vds / LPCB approved

We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

We are offering metal detectors.

• Model Name/Number: C7027A1049
• Brand: Honeywell
• Operating Temperature: Minus 18 deg.C to 102 deg.C, or Minus 40 deg.C to 102 deg.C
• Max. Pressure Rating: 5 psi
• Mounting: Collar with 1/2-14 NPSM internal threads for mounting on a 1/2 in. sight pipe
• combustion controls/amplifiers: R4341/R7323, R4343/R7323, R4344/R7323

• Power Source: Battery
• Alarm Current (A): 3A 
• Battery Life: 10 years
• Voltage (V): 12 v
• Weight (g): 200g
• Shape: Round
• LED Indication: Yes

• diameter: minimum 6mm

Detect all Type of Ferrous and Non- Ferrous Metal Alloys Light Weight with Strong ABS Body Easy to operate Operate on Dry and Rechargeable Mode Variable Sound Effect as per Metal Volume, Vibration Mode Option Harmless for Heart patients.

• Display Type: Digital
• Brand Name: Ambetronics
• Material: ABS+PC
• Usage: Hospitals,R&D Labs,confined spaces,drainage system pits,coal mines,car parking spaces,etc.
• Application: Industrial
• Warranty: 1 Year
• Programmable Linear: 4-20mA / 20-4mA 0/P
• Accuracy: 1% of the full scale value

• Feature: Min. defect size: up to 0.05 mm2 depending on application. (Inspected material, resolution, contrast of acquired image, web speed) Max Web speed: up to 200 mtrs. / min. Max web width: up to 600 mm (23”)

SHARK 4000 LEX, the 100 % print defect detection system for use on rewinders and narrow-web printing machines. It stands out due to its well-engineered technology, extensive range of functions, comprehensive defect management software and features.

• Brand Name: Cooper
• Automation Grade: Automatic
• Condition: New
• System Components: Fire Alarm Control Panel,Smoke Detectors
• Body Material: Plastic
• Wall Mounted: Yes

Being the leading Digital Ultrasonic Flaw Detector Manufacturer and Supplier, the company offers it at the market leading prices. Our Digital Ultrasonic Flaw Detector is used for detecting internal flaws like cracks, blow holes, etc. Moreover, the Digital Ultrasonic Flaw Detector cannot be used to find out elastic constant and correlating sonic velocity to mechanical parameters. Our Digital Ultrasonic Flaw Detector is available in 2 models such as UFD 4444DL and UFD 4444D. Features Bright High Resolution TFT DisplayLight Weight & Easy to useDAC with AlarmRF outputB - ScanVideo ModeDual GateSeparately Gate A& Gate B setting with alarmPulse repetition frequency control Offered For Nodularity Monitoring/MeasuringElastic Constant MeasurementSingle Channel Multiplexing online testingMulti-channel on line testingVelocity measurement in gases i.e velocity based gas analysis

• Range: 0
• Material Velocity: 1000
• Dynamic Range: ≥ 32dB
• Vertical linear error: : ≤ 3%
• Horizontal linear error: ≤ 1%
• Resolution:: > 40dB
• Sensitivity Leavings: 60dB – On FBH
• Rejection: 0 to 80 % Linear
• Noise level: ≤ 10%
• Power: DC 9V: Lithium batteries Operation-10hr or more.
• Output: Alarm with sound and light.
• Dimensions: 263 mm × 170 mm × 61 mm
• Measurement cycle: 4 times/SEC, scanning of single point measurement model 20 times per second.
• Weight: 1.5 Kg (with battery)

• Alarm Mode: Vibration, Sound
• Range: 4 -6 feet

Wide operating temperature range permits operation at higher ambient temperature 4-20 mA stepped output is the industry standard for remote alarm and fault indication Modbus and HART user interface provides complete status and control capability in the control room Three SPDT high-current programmable relay outputs provide both immediate and time-delayed relay outputs for alarm, warning and fault conditions Event logging stores fault and alarm history