Leak Detectors Dealers in Sakinaka, Mumbai

Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Smoke Detector Camera. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.

Continuous Multi Gas Monitoring Complete Automatic Operation. Self Diagnostic Check. Diffusion or Suction Sampling. Backlit Alpha numeric Display. Audio and Visual Alarm. Simultaneous Display of Gas name and Concentration Audible Alarm / Low Battery Warning Buzzer Intrinsically Safe No Scope for user error These Compact, self contained and intrinsically safe designed instrument housed in a weather proof high impact plastic case are powered with a replaceable 4X1.2V Dc battery. On switching 'ON', the instrument goes thorough its complete self integrity check, and displays factory set Warn and Alarm values before indicating 'Ready' for monitoring While in Operation, the instrument monitors the work place continuously giving the latest update concentration of designated Gas through diffusion sampling. Suction sampling is possible with an optional manual or battery operated pump and adaptor. The poison resistant Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross interference filters are gas specific. Optionally the sensors can be mounted on an extension cable for monitoring inaccessible locations before entry. The instruments emits an audible beep every 15 sees that provides confidence to the user that he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous situations.

Ferrous Metal Detector is equipped with an audio-visual alarm to draw the attention of the operator. The Ferrous Metal Detector is energy efficient and ensures trouble-free operation. The Ferrous Metal Detector has automatic balancing facility and supports dual channel operation. Energy Efficient Ferrous Metal Detector has automatic adjustment facility for temperature variation. Das Electronics is the manufacturer of Energy Efficient Ferrous Metal Detector. Das Electronics is the supplier of metal detectors like bag metal detectors, capsule metal detector, gravity feed metal detector, pipeline metal detector, needle detector and tablet metal detector. This range of products finds application in various industries like food and beverages, pharmaceuticals, garments, plastic processing, packaging industries and other industrial organizations.

• Alarm Mode: Vibration, Sound
• Range: 4 -6 feet

Advanced Metal Detection in Pharmaceutical Tablets Designed to meet the exacting standards and regulations of the pharmaceutical industry, METTLER TOLEDO Safeline pharmaceutical metal detectors provide the ultimate solution in fully integrated product inspection and rejection systems for tablets, capsules, powders and granules. Our metal detection systems are designed to detect all metal contaminant types, including ferrous, non-ferrous and even the most difficult-to-detect non-magnetic stainless steels.

Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors

The company is a highly acclaimed Supplier of Metal Detectors. The Metal Detectors, offered by the company, can be availed in a wide range that includes Door Metal Detectors, Black Hawk Metal Detectors, Hand Held Metal Detectors, Phantom Metal Detectors, Baggage Metal Detectors, Stealth Metal Detectors and Bag Metal Detectors. The company offers the Best Metal Detectors at the best prices on a timely basis.

Flame and Gas Detection systems withwithout SIL certified controlling & PLC conforming IEC 61508.These systems are also supplied wireless communication using HART ISA 100 GSM wireless.Metal Oxide Semiconductor Detectors.

Multi Zone door Frame detector,is backed with technological superiority and quality. It is a highly dependable and Simple to operate by actual user on site. Audio and visual alarm is provided to draw an attention of the user. An audio alarm varies with the volume of metal detects. The convenient slabs of Sensitivity levels offer freedom for user to assign Severity of security level. A special feature of ''FERRITE'' detection is provided to detect special weapons made with ferrite material which is impossible to detect with conventional metal detects. IN and OUT programmable counters give a statistics of the incoming and out going traffic.Details : A Hand Held metal detector is a carefully designed device, ideal for detecting metal on HUMAN BODY and an OBJECT for security purpose. It is designed and manufactured as per related IS. (Indian standard). It''s design is such that it dose not affect an in-planted PACEMAKER. Due to its ultra high sensitivity it is an ideal detector for jewelry and precious metal industries. Battery charger is built-in so it''s handling become very easy.

Hdpe Granules, Plastic Raw Material, Plastic Raw Materials

• Brand Name: GFG
• Gas Type: Combustible Gas
• Brand Name: GFG
• Detector Features: Adjustable Sensitivity
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Display Type: Digital

The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

• Type: Lpg Gas Leak Detector
• Material: ABS Plastic
• Certification: CE Certified
• Feature: Easy To Use
• Condition: New
• Display Type: Digital
• Warranty: 1Year
• Gas Type: Combustible Gas, LPG Gas, Natural Gas
• Brand Name: Ambetronics
• Voltage: 24VDC
• Sensor: No
• Certificate: CE
• Name: LPG PNG Gas Detector

• Technical Specification: UL / Vds / LPCB approved

We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds

Microprocessor control Advanced digital signal processing Tricolor visual LED display and audible signal for progressive leak size indication Seven levels of sensitivity Tactile keypad controls Real-time SF6 sensitivity adjustment Battery test function Battery voltage indication True mechanical pumping provides positive airflow through sensing tip Mute feature included Cordless and portable Comfortable one hand operation One year warranty