Leakage Current Tester Dealers in Mumbai

• Machine Feature: 1. Makes test easy and quickly2. All calculations are based on known standard theory, which is widely accepted.3. Fully digital processing through embedded microprocessor enables high accuracy, reliability and stability.4. Two isolated channels to input t
• Range of leakage current: 0-10mA (RMS), 50 Hz/60 Hz.
• Accuracy of leakage current: ± (reading x 5% + 5 uA)
• Accuracy of fundamental resistance current (PT mode/ No interference): ± (reading x 5% + 5 uA)
• Accuracy of current harmonic: ± (reading x 10% + 10 uA)
• Input impedance of leakage current: ≤2Ω
• Range of reference voltage: 25-250V (RMS), 50 Hz/60 Hz.
• Accuracy of reference voltage: ± (reading x 5% + 0.5 V)
• Accuracy of voltage harmonic: ± (reading x 10%)
• Input impedance of leakage current: ≥300K Ω
• Range of electrical field: 30kV/m – 300kV/m.
• Accuracy of electrical field: ± (reading x 10%)
• Accuracy of electrical field harmonic: ± (reading x 10%)
• Battery duration: 6 hrs continuous at full charge.
• Charging input: 100-250V, 50 Hz/60Hz.
• Charging time: 6 hrs approximately.
• Operating conditions: 0-60 Deg.C.,
• Storage temperature: -20 to 60 Deg.C.
• Relative Humidity: <90% non-condensing
• Dimensions: 35 cm (L) x 28 cm (W) x 18 cm (H)
• Weight: 5 kg ( tester) ; 4 kgs (Cable Case)

• Test Point: Line/ Neutral Selectable
• Usage: Industrial/ Lab
• Product Name: Leakage Current Tester

technical specifications   display : 3 1/2 digit, 0.5" ht red led display range : 0-1.999ma resolution : 1 micro amp accuracy : 0.6% ± 1 count. impedance : 2 k ohm facility : line selector switch to measure leakage current from line 1 or line ii to body of the appliance under test. power : 230 v ac ± 10%, 50hz output : socket provided for easy connection of appliance under test dimensions : 220(w) x 70(h) x 180(d) mm3

For general-use electrical devices Built-in non-medical use networks For rated currents of up to 20A For automatic testing on production lines, etc

• Tripping current setting range: 0 to 1.999 A

Leakage Current Tester Test to measure the undesirable leakage current that flows through or across the surface of the insulation or the dielectric of a capacitor .     Features Accurately designed current measuring system Both live and neutral polarity test can be performed Reset facility after tripping Flexible models w r t leakage current, test voltage, online / offline testing

Description :-Current leakage testers are devices that are used to measure the amount of current that passes through a ground conductor. These devices can be used both during normal and single-fault conditions to determine whether electrical devices pose a shock hazard.Salient Features & Uses :These equipment find a wide application in the following areas: The tester consists of a measuring device or probe that gets connected to a voltmeter that displays root mean square values. The tester also includes a circuit featuring specific frequency and resistance. Available as manual, semi-automatic and automatic types. Common testers include an RS232 serial bus or a parallel port designed for connecting to a printer. There are some leakage testers, which consists of a general-purpose interface bus and are designed to connect to computers, peripherals, and laboratory instruments. These devices differ in terms of current leakage range, communications, resistance range and special features. The leakage testers meet the requirements of various national and international standard organizations. Provided with a rapid cut off system to protect the device from high voltage or current. Provided with front panel lockouts that prevent any damage to the instrument during testing.

Description :-Current leakage testers are devices that are used to measure the amount of current that passes through a ground conductor. These devices can be used both during normal and single-fault conditions to determine whether electrical devices pose a shock hazard.Salient Features & Uses :These equipment find a wide application in the following areas: The tester consists of a measuring device or probe that gets connected to a voltmeter that displays root mean square values. The tester also includes a circuit featuring specific frequency and resistance. Available as manual, semi-automatic and automatic types. Common testers include an RS232 serial bus or a parallel port designed for connecting to a printer. There are some leakage testers, which consists of a general-purpose interface bus and are designed to connect to computers, peripherals, and laboratory instruments. These devices differ in terms of current leakage range, communications, resistance range and special features. The leakage testers meet the requirements of various national and international standard organizations. Provided with a rapid cut off system to protect the device from high voltage or current. Provided with front panel lockouts that prevent any damage to the instrument during testing.

• Color: yellow
• Packaging Type: Box
• Power: electrical
• Model Name/Number: leakage current tester
• Usage/Application: Laboratory
• Grade: Semi-Automatic
• Phase: single phase