lektrocraft (India) Pvt. Ltd. Palghar, Mumbai, Maharashtra

  Salient Features: Rectangular Double Walled  Inner SS polished & Outer MS powder coated  Capacity : EWB 10 L, 20 L  Lid Stainless steel  Temperature Range Ambient to 99'C  Electrical Protection 15 Amps. Fuse  Micro processor temp. controller  Display LED  Heater Immersion  Shelves False bottom 

The unit is meant for quick and thorough out mixing of liquids in test tubes, small flasks or bottles. The mixer consists of an enamel finished housing containing the motor with an eccentric drive to a rubber buffer on the top. The tube is held against the vibrating buffer and the intensity of agitation controlled by varying the position in which the tube is held. The thyristorised speed controller enables adjustment of degree of oscillations.   The above unit operates on 220/230 V, 50 cycles  A. C. Supply.   Vortex Mixer: V 31   Adaptor for multiple tube holder - 6x0.4 ml, 6x0.5 ml, 6x1.5 ml. V 32   Adaptor for tubes, bottles and flasks up to 250 ml.   Dimensions and specifications given above are approximate and not binding. We reserve the right to make improvements modifications with out notice.

Type : VM 301

ELTEK’ Ultra Deep Freezer is specifically designed for Blood Banks and Pharma / Research Laboratories. The system includes micro controller based graphic display which ensures crystal clear accurate temperature value from long distance. Inner chamber is made of Stainless Steel 304. Operation is made simple with the help of soft buttons. Door locking system also provided for better security. These systems having of High-Tech Cascade rapid cooling system provides quick pull down of temperature up to -80°C.   SALIENT FEATURES:-  CFC free Refrigerant and high density PUF Insulation.  7 Days Chart Recorder  Password protected control board.  Micro Controller based Graphic LCD display.  Eco-Friendly refrigerator system with time delay for both compressors.  Audio-Visual alarm if the temperature deviates.  Power failure alarm. (Optional)  Door open alarm. OPTIONAL ACCESSORIES:-  8/4 Channel temperature data scanner with sensors, printer interface data management, pen drive data retrieval facility.  Mobile alert via GSM in case system fails.  7 days chart recorder. CALIBRATION:-The equipment calibrated with the help of Master Calibrator, which is certified for its Accuracy by Electronics Regional Test Laboratory (ERTL-Mumbai).  

The range of centrifuge is specifically designed for use in Oil Testing for tests as per ASTM and IP standards. The unit is fabricated from steel and epoxy coated.  

  Eltek Stability Test Chambers are specially designed to conduct stability and shelf life study of  drug and Drug substance. It is extensively used for testing on electronic & mechanical  components, Packaging industries, Agricultural Research Laboratories, Drugs and Pharma  Industries.    Special Features:-  Unique forced air flow system ensures even distribution of humidity and temperature  Precise control of temperature and humidity by using PID controller  CFC free PUF insulation ensure temperature and humidity stability in chamber  Heavy Duty Castor wheel for easy mobility  IQ,OQ, PQ, DQ, Documentation  Refrigeration system with CFC free Refrigerant. Compressor With time delay.  Steam Injection system and low water level Alarm for safety.  LED light with door switch for chamber illumination  Auto tuned Temp/Humidity Controller  Cabinet construction: -Interior chamber is stainless steel (SS 304 1 mm thick)  The exterior Mild steel Imm duly powder coated. Heavy Duty Stainless Steel Perforated trays.  In GMP Model Interior chamber (SS 304) & exterior chamber also (SS 304).  Provision for drainage outlet to remove water in the chamber.  Optional Accessories:-  Eltek data storage device and 21 CFR Part Il Compliance software for data management  Double walled vacuum Glass Door  Temperature and Humidity scanner 4+4 with USB printer port  Standby Refrigeration system  Standby Humidity System  Door access security system  GSM Mobile Alert System  Touch screen display with PLC feature.

  Salient Features: Temperature : 2'C to 60'C, Accuracy: ± 0.5'C.  Platform & Chamber MOC: SS304.  Digital LCD display, Time up to 9999 min.  Amplitude: 40mm. Auto slow restart when power fails. Eltek make heavy duty Motors. Stepper Motor Model available on request.  Universal platform for various size flask holders.  10 preset programme. User Defined Acceleration Deceleration  Password Protected Control Panel Technical Data:

The Rotomantle is a combination of heating Mantle cum Magnetic Stirrer to obtain heating & stirring in flat bottom round flasks. The unit has two tier construction with the upper compartment consisting heating mantle made of fiberglass yarn & fitted with heating element. The smooth running apparatus utilises the rotating magnetic field from a balanced permanent magnet to induce variable stirring action & uniform heating in closed or open flat bottom round flasks. The unit is provided with a teflon coated magnetic stirring paddle. The stepless Speed Control enables stirring from very low to the maximum & the energy regulator controls the heating at any desired percentage of the heating capacity.  

The range of centrifuges are designed for multi purpose application with the facility of inter-chargeable rotor heads, Display Digital LCD with Set & Working Parameters, Safety Sturdy Cabinet, Lid Lock & Imbalance Protection.

Display : Digital LCD

'Eltek' Quick Freezer is specifically designed for Blood Banks. Its usage includes preservation of plasma and blood components at desired low temperature. The system includes micro controller based graphic display which ensures crystal clear accurate temperature value trom long distance. Operation is made simple with the help of soft buttons. Door locking system also provided tor better security. Freezer consists of High-Tech rapid cooling system provides quick pull down Of Temperature upto -40'C.   Salient Features: CFC free gas and high density PUF Insulation.  Password protected control board.  Micro Controller based Graphic LCD display.  Eco-Friendly refrigerator system with time delay.  Audio-visual alarm if the temperature deviates.  Power Failure Alarm. Door Open Alarm GMP Model: Inside stainless steel 304, 0.8mm thick and outside stainless steel 304, 1.00mm thick. Standard Model: Inside Stainless Steel 304, 0.8mm thick and outside 1.00mm mild Steel powder coated.    Operational Accessories: 8.14 temperature data scanner with sensors, printer interface data management, drive data retrieval facility.  Mobile alert via GSM in case system fails.    Calibration: The equipment calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Test Laboratory (ERTL - Mumbai).   

Eltek Blood Bag Tube Sealer is made for Blood bag sealing. It is battery operated sealing unit and easy to carry. This sealer has handle with 2/3 meters coax cable and power unit with batteries. It is Designed to minimize Hemolysis and contamination through blood bag seal.  Salient Features:   Hermetic Sealing which minimize haemolysis of blood.   R F Sealing Technology.   No warm up time required in between seal.   Special Designed sealing gun ensure easy to use.   Easy separation of the tube segments after sealing.   800 Quality seals from full charge.   Easy to carry because of light weight.   Powerful battery back-up. Compatible with tubes of various manufactures

'Eltek' Plasma Freezer is specifically designed Its usage includes preservation of plasma and blood components at desired low temperature. The system includes micro controller based graphic display which ensures crystal clear accurate temperature value from long distance Operation is made simple with the help soft button . Door locking system also provided for better security. Freezer Consists High-Tech rapid cooling System provides* quick pull Of Temperature upto -40°C.    Salient Features: CFC free gas and high density PUF Insulation  Password protected control board.  LCD based Graphic display  Eco-Friendly refrigerator system with time delay.  Audio-Visual alarm if the temperature deviates.  Door open alarm GMP Model: Inside stainless steel 304. 1.00mm thick and outside stainless steel 304, 1.00mm thick.  Standard Model: Inside stainless steel 304, 1.0mm thick and outside 1.00mm mild steel powder coated.    Optional Accessories: 8/4 Channel temperature data scanner with sensors, printer interface data management, drive data retrieval facility.  Mobile alert via GSM in case system fails.  7 days chart recorder.  Power failure alarm.  Calibration: The calibrated with the help or master calibrator, Which is certified for its accuracy by Electronics Regional Test  Laboratory (ERTL-Mumbai)

  'Eltek' Platelet Incubator is designed to Store platelet concentrate in continuous motion for use in blood banks, The Outer body made mild steel 1mm thick) powder coated: inner chamber is tabric3te6 of stainless steel 304 grade 0.8mm thickness. The system includes micro-controller based LCD graphic display which ensures crystal clear and accurate temperature value from long distance Chamber mounting electrical outlet available for agitator Forced air circulation inside the chamber for temperature uniformity. Glass window in the door for clear visibility inside the chamber.    Salient Features: 7 day circular Chart recorder  CFC free PUF  Audio-Visual alarm when the temperature deviates from the preset temperature.  Agitator will stop when door open.  CFL lamp for chamber for internal Visibility.      *GMP Model: Inside stainless steel 304, 0.8mm thick and outside stainless steel 304, 1.00mm thick.  Standard Model: Inside stainless steel 304, 0.8mm thick and outside I .00tnm mild steel powder coated.    Calibration: The equipment calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Test Laboratory (ERTL-Mumbai).

‘Eltek’ Platelet Agitator is designed to stole platelet bags with good ventilation and continuous motion. Steel plated sliding trays can be removed for cleaning as well as easy removal and loading of bags in the tray Heavy duty baring for smooth operation. Interlace facility with Eltek incubator for auto stop when door open.    Optional Accessories: 8/4 Channel temperature data scanner with printer interface. pen drive data retrieval facility.  Mobile alert via GSM in case system fails.  Power failure alaram. (Optional).   

  'Eltek' min controller based Plasma thawing Bath is designed for quick 'hawing at plasma at 37'C,Temperature is controlled by LCD temperature controller It has smooth acrylic trays to ensure the safety of plasma bags The magnetic pump maintains precise temperature uniformity inside the It is specially designed for safety and reliably thaw fixed frozen plasma (FFP).   Salient Features: Micro controller based LCD display.  Glass wool insulation improves temperature stability and energy efficiency.  Display for set and process value  Magnetic pump tar internal liquid circulation for uniformity.  Outlet for remove liquid inside the tank Audi-Visual alarm when the temperature deviates from the preset temperature.

Pressure Plate Transparent Acrylic, Material of construction Mild steel powder coated, Size (mm) L195x D250xH195, Alarm Audio visual, Power 230 VAC 50Hz Single Phase.

Model TC 725 A are centrifuges designed for Pathology Labs. Hospitals, Blood Banks etc. where large number of low volume samples are to be centrifuged. The centrifuge is provided with step less speed regulator and Ito 60 minutes preset timer with pass switch and Fixed Angle Rotor Head to catty 5 disposable tubes.  

Salient Features: Timer up to 9999 minutes. Orbital Amplitude: 40mm Alarm after completion of process LCD Display, Slow START & STOP functions Continuous operation even in Ambient Temperature up to 40'C Eltek make heavy duty motors 10 preset programs User defined Acceleration / Deceleration Universal platform for various size flask holders (optional) 

A range of centrifuges for general purpose use in Pathology Labs, Small Hospitals, Schools and Colleges. The centrifuge with 5 step speed regulator is provided with Horizontal (Swing Out) Rotor Head.

This group of Magnetic Stirrer are similar to the above series but have additional hot plate to achieve heating of solutions to be stirred. The heating is controlled by Digital Temperture Control. Features : Digital speed indicator Soft start & memory of last used program in case of power failure. Variable stirring capacity Preset digital timer (0-99 min) Soft touch keypad for Speed & Time PMDC motor Note : Thermostatic Temperature control with PT - 100 sensor to measure and maintain the liquid temperture can be provided on request.

These equipment are intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetised tefloncoated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjusted with the programmable digital speed control and time can be set digitally.   Features : Digital speed indicator Soft start & memory of last used program in case of power failure. Variable stirring capacity Preset digital timer (0-99 min) Soft touch keypad for Speed & Time PMDC motor

  REMOTE CONTROL CONTINUOS VARIABLE AUTOVARIAC DIMMERSTAT TYPE   LVS 137 - Suitable for 1/8 HP AC/DC Stirrer and Motors. LVS 138 - Suitable for 1/4 HP & 1/2 HP AC/DC Stirrer and Motors. LVS 139 - Suitable for 3/4 HP & 1 HP AC/DC Stirrer and Motors