Lever Limit Switch Dealers in Mumbai

• Max. Voltage: 220 VAC
• Packaging Type: Plastic Packet
• Country of Origin: India
• Rust Proof: Yes
• Usage: General
• Specialities: Rust Proof, High Quality

Description: Suni Lever Limit Switch is used for heavy duty E.O.T. Cranes, Wagon shunting devices etc., to prevent over travelling or over traversing on power and control circuit up to 500 volts A.C. 50 cycles / second and 40 amps current rating. We are counted among the ecstatic Lever Operated Limit Switch Manufacturers in India. Suni makes Lever type Limit Switch normally remains closed and cuts off power to stop the motor of the particulars motion. Suni Make lever Limit switch operates when its lever reaches its pre-determined position and the lever is moved over a projecting member fixed on the Girder. The Limit Switch contacts are automatically reset when the lever returns to zero position due to spring action. The Lever Limit Switch is made in IP-54 enclosure. In case of IP-54, the cover is of Cast Aluminum. Also in this case the base and cover have machined surface to protect the Limit Switch against dust. The cam shaft on which the cams are fitted is mounted in the housing on moulded bushes of synthetic material which are fixed to the front and rear walls by means of screws. The Cams which are fitted on the cam shaft are moulded from the highest quality synthetic material and are accurately cut to correspond to the switching sequence desired. The contacts have a maximum continuous Current capacity of 40 amps AC. The contact tips are made of high grade Silver Cadmium Oxide alloy. When used for Series operation [up to 40 Amps maximum], the Contacts are suitable for 720 operations per hour and in case of Shunt operation [for Control Circuit], the Contacts are suitable for 1000 operation per hour. The same Contacts can be used in Series as well as in Shunt configurations The switching capacity of the Contacts when used for Shunt operation is 15 amps at 400 Volts, AC on highly inductive load and 2.5 amps at 220 Volts DC. These switching capacities in fact are far in excess of what is actually required in practice and hence replacement of Contacts for Shunt may not be necessary for a long time. The body of the Contacts is made of high grade Melamine which is specifically suited for heavy duty operation .The material is non tracking and is capable of with standing heavy arcing.

We are regarded as one of the Safety Roller Limit Switch Exporters in Maharashtra, India. The Roller Lever Limit Switch that we manufacture is used to prevent over travel or traverse in E.O.T. Cranes, wagon, shunting devices, elevators, travel mechanism, etc. We have been able to earn ourselves a prominent position as the Wholesale Roller Lever Switch manufacturer because of its supreme quality. Applications Cranes, Long Travel, Cross Travel, Lifts, Furnace Doors, etc

Operates the control change-over the contacts of a motor of a moving equipment when a cam moving with loads actuates the lever (or the weight rests on a surface) of the Limit Switch. This turns the cam on a square shaft and operates the NO NC change over the contact elements.

• Usage: Industrial use
• Type: Lever Limit Switch
• Material: Aluminium
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 500 V.A.C.
• Surface Finishing: Power Coated
• Current Rating: IP-55
• Switch Type: Lever Limit Switch
• Wire Connection: Screw terminal

• Usage: EOT CRANE
• Mounting: Floor

• Rated voltage is: 500 V.
• No. of contacts is: 2 / 3 / 4

Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a predetermined position when the lever is moved over a projecting member fixed on the girder. The series limit switch is fitted with four sets of contacts which cuts off two phases of the motor in either direction and is suitable for 500 V supply system.

Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a predetermined position when the lever is moved over a projecting member fixed on the girder. The series limit switch is fitted with four sets of contacts which cuts off two phases of the motor in either direction and is suitable for 500 V supply system. The limit switch contacts are automatically reset when the lever returns to zero position due to spring action.  The base and cover have machined surface to protect against dirt and dust. Supplier of Lever limit Switch and manufacturer of Lever Limit Switch. Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer of Lever Limit Switch in India. Pethe Industrial is the leading supplier of Lever Limit Switch in Mumbai, Maharashtra, Gujarat, Delhi, and all over India.     Salient Features • Body material is made of Aluminium / CI casting. • Enclosure is of IP-44 / IP-55 degree of protection. • Mounting position is Vertical. • Cable entry is of ¾” conduit • Rated voltage is 500 V • Thermal test current is 10 Amps • No. of contacts is 2 / 3 / 4 • Mode of operation is 2 way self resetting. • Contact material is of silver cadmium. • Any other specification can be manufactured upon request.             Application   • All Material Handling and Lifting Equipments   • Hoisting : electric wire rope Hoists and Crabs   • Cross travel and Long travel : EOT / Gantry / Goliath / Derrick Cranes   • Winches and Conveyors   • Rolling mills   • Sugar, Mining, Cement, Textile industries to name a few.   • Brake motors

• Usage: Industrial use
• Type: Lever Limit Switch
• Material: metal
• Certification: ISO 9001:2008 Certified
• Color: Orange
• Condition: New
• Max. Voltage: 440 V
• Surface Finishing: Polished
• Switch Type: Rotary Limit Switch
• Current Rating: 40 amp
• Features: High strength, Rust proof, Low maintenance

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Color: Black
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Switch Type: Lever Limit Switch

• Usage: For eot cranes
• Type: Roller Lever Limit Switches
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 500 volts ac
• Switch Type: Rotary Limit Switch
• Power: 60 amps

Following are the Features of Lever Limit Switch Made from premium quality materialsAdvance technologyUnique designE

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 500 Volts AC
• Surface Finishing: Power Coated
• Current Rating: 40 amp
• Switch Type: Lever Limit Switch

• Usage: For Eot Crane
• Type: Lever Limit Switch
• Material: Aluminium
• Certification: ISO 9001:2008 Certified
• Condition: New
• Surface Finishing: Polished
• Features: Rigid structure, Optimum performance, Sturdy construction

Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over Travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a Predetermined position when the lever is moved over a projecting member fixed on the girder.

• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Color: Orange
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Current Rating: 10 Amps
• Switch Type: Lever Limit Switch

Lever Limit Switch, Master Controller, Resistance Box, rotary limit switches

• Voltage: 500 V
• Body Material: M.S sheet/Aluminium casting
• Enclosure: IP-44/IP-54
• Mounting Position: Vertical
• Cable entry: ¾” Conduit
• Thermal Test Current: 10 Amp
• No. of contacts: 2 / 3 / 4
• Mode of operation: 2 way self resetting
• Contact Material: Silver Cadmium

Introduction Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a predetermined position when the lever is moved over a projecting member fixed on the girder. The series limit switch is fitted with four sets of contacts which cuts off two phases of the motor in either direction and is suitable for 500 V supply system. The limit switch contacts are automatically reset when the lever returns to zero position due to spring action.  The base and cover have machined surface to protect against dirt and dust.

lever type limit swtiches, electro hydraulic thrustors