Liquid Mixers Dealers in Goregaon, Mumbai

Jet Mixing can also be used judiciously for Inline Mixing. There are some situations where Inline Jet Mixer could be preferred over Static Mixers. If one of the Liquid has sufficiently high pressure and if there is not enough space for a Mixer a Standard Jet Mixing arrangement could be used as shown above. Here the ratio of Flow Rates of the Mixing Liquids plays an important role. When the Mixing Liquids viscosities have a large difference that is their ratios are either very high or very low a preferred arrangement is as shown as given below A situation where the density difference in two liquids is high and one invariably settles in at the bottom of a horizontally laid pipe, an arrangement shown below is useful. A typical example of this is Crude Oil flow from an Oil Well to the Tank Farm Mamko have sufficient knowledge of Jet Mixing to enable them to design Inline Jet Mixers as per the process requirement.    

We offer a wide range of Contra Rotary Mixer for our esteemed clients. Our products are fabricated using high grade raw material which we procure from trusted vendors in the market. These mixer are reliable and long lasting. These mixers can be availed in market at competitive prices.

Magnetic Stirrer Home › Products › Magnetic Stirrer The company is the major Laboratory Magnetic Stirrer Manufacturer, Supplier and Exporter from Mumbai, India. We offer these Magnetic Stirrers in various grades and specifications to meet the diverse demands of the clients. Our Magnetic Stirrer is highly-demanded in UK and other Asian Countries. The range of Magnetic Stirrer, offered by us, is inclusive of Magnetic Stirrer With Hot Plate and Magnetic Stirrer Without Hot Plate. Magnetic Stirrer is packed using high-grade wooden and corrugated materials ensuring easy, safe and prompt delivery

• Capacity: 20,000 liters

Basically a magnetic mixer is like a conventional mechanical mixer — it has a motor, a driveshaft, and mixing blades that mix stuff in a tank. Technically the term used for the mixing blade assembly in mixers is “impeller.” A propeller on a boat or an airplane is also a type of impeller. Impellers are designed to move liquids or gasses by rotating. What makes a magnetic mixer different from a conventional mixer is that the motor uses magnets to move the impeller. This works by attaching one set of magnets to the motor driveshaft and another set of magnets to the impeller.The advantage of magnetic stirrers is the suppression of sealing technology. The rotation of mixing elements is enabled by a magnetic field creating a touch-less torque transmission.

• Advantages: Low energy consumption,Custom design.

STATIC MIXER eliminate costly downtime and enhance product and process control. SCIPL static mixers have no moving parts to cause maintenance problems, and they deliver exceptionally long, worry-free life.After careful study & consideration of various process parameters such as Viscosity, Density, Flow rate, Pressure Drop & desired CoV –Coefficient of variation (a measure for degree of mixing), Reynold’s number, flow type- Laminar or turbulent; we at Shalin Composites design & fabricate static mixers for various applications. Our vast experience & expertise in field of composites enable us to offer static mixers in various material of construction viz: PP, PVC, FRP, PVDF, PTFE, SS, and MSRL to suit highly corrosive conditions.

• Material: SS
• Automation Grade: Automatic
• Capacity: 1000 to 5000 BPH
• Brand Name: V.J. Water
• Voltage: 110-480 V
• Frequency: 50-60 Hz

Jet Mixer, High Pressure Receiver, eductor mixer, Static Mixer

Slurry mixer, Power-Sprays’ GRCGFRC mixers are designed to produce high quality mixes in the minimum time. Power-Sprays offers fixed speed “High Shear” slurry mixers for preparing low water content slurries for Traditional Sprayed GRCGFRC and variable speed “Combination” mixers for the production of both Traditional Spray and Premix GRCGFRC, including Spray Premix GRCGFRC. Formats range from 125 kg maximum capacity manually loaded machines through to 300 kg capacity fully automated bulk fed batching systems. A comprehensive range of accessories is also available which can provide semi or fully automated control of the addition of chemical admixtures, Acrylic Polymers and the Alkali Resistant glass fibres.

• Material: SS
• Automation Grade: Automatic
• Capacity: 1000 to 5000 BPH
• Brand Name: V.J. Water
• Voltage: 110-480 V
• Frequency: 50-60 Hz