Liquid Tanks Dealers in Mumbai

• Material: Aluminum, Carbon Steel, Metal
• Surface Finishing: Coated
• Shape: Cylinder
• Color: Grey, Light Silver
• Condition: New
• Application: Gas Storage
• Certification: FAA Certified, ISI Certified
• Feature: Completely Integrated, Double Walled, Durable, Fireproof Certified, Heat Resistance, Highly Reliable, Insulated, Robust Design, Rust Proof
• Type: Puch Magnum Gas Tank
• Brand: Puch Magnum

Alkalis such as sodium Hydroxide (caustic soda), Potassium hydroxide and sodium carbonate.Water Tank India have different type of liners as per different application. The liner have capability of supporting water pressure of more than 2 kgsq.cm and upto 180 meters water column , also suitable for storage of a large range of liquids.

• Certification: CE Certified
• Feature: Anti Corrosive, Durable, High Quality, Shiny Look
• Storage Material: Chemicals/Oils
• Capacity: 250-500 L
• Application: Industrial
• Material: Stainless Steel
• Brand Name: Technic Pharma Equipments
• Surface Treatment: Powder Coated

• Type: Expansion Tanks with Bladders
• Brand Name: Divya / Ojas
• Material: As per Specs
• Weight: As per Size
• Warranty: 1 Year
• After-Sales Service Provided: 1 Year Free

Expansion tanks are closed containers usually supplied as pressure vessels that incorporate an internal bladder and charged with Compressed Air. They are designed to allow the gradual Entry & Exit of liquid from the attached system in order to prevent over-pressure or vacuum conditions if the volume of the liquid in the system changes due to temperature, or due to some other effect. Accordingly the inlet/outlet connection requirements are normally very different, with expansion tanks typically requiring much smaller connection than for a similar sized surge vessel. Expansion tanks are normally provided with an internal bladder, or membrane to separate the process liquid from the charged air. Bladders are used because they separate the liquid from the gas and prevent absorption of the gas by the liquid. They also prevent escape of the air from the vessel when the system is depressurised. Internal bladders will be supplied in Butyl, Nitrile or Viton rubbers, depending on the compatibility of the process liquid with the rubber as well as the operating conditions in which the tank will work. Sizing of the vessel will depend upon the demands of the system, as well as the working pressure range and temperature.

As the name suggest, it is used as storage device. They are available in different shapes viz. elliptical, dished, flat or conical head as per the requirements of clients.

• Price: Rs 1 Lakh / Piece(s)

To make sure that we offer only defect-free range of products, our quality experts cross check every product at diverse stages. The transactions related to payment carried out between us and our clients are kept confidential. You details are not shared with anyone except the concerned personnel to ensure high level of security. Features: Sturdy Precise working Fine design Longer life Other Details: These Product are Durable, Robust and Cost effective Tanks & Vessels are used for storage of chemicals, solvents & any type of liquids We manufacture custom storage tanks for the chemical, pharmaceuticals and food processing Industries To ensure the product quality and compliance with customer specification, all of our fabricators. Tanks & Vessels can be fabricated in various designs and options such as shape, capacity and material of content. In shape i.e. vertical, horizontal, rectangular and capsule In capacity i.e. from 50 Ltrs to 15,000 Ltrs. In material of content i.e. SS 304, SS 316, SS 316L and Mild Steel

To determine the amount of liquid present in the tank, the Ultrasonic transmitter is used. This generates a 4 to 20mA output signal, which is given to instrument. The display indicates the height of the liquid in the tank. By using the volume formula, the volume of the liquid is also displayed. The retransmission output related to volume is given out for SCADA software package for further processing.

Suttons has been operating gas tanks for over 20 years globally. At present they operate a fleet of 14bar, 21bar, 27.5bar and 34bar Gas tanks, with baffles and at varying capacities. As per your requirement we can send you some technical details drawings of the tanks we would recommend. Suttons has extensive experience in safely and successfully transporting gases by road and these major contracts confirms Suttons as one of the leading providers of bulk gases distribution services world wide.

• Capacity: Upto 4000 gallons
• Compatibility: With all foam concentrates
• Construction: CS/ SS304 / SS316
• Tank construction: As per IS / ASME codes
• Anti Corrossion Treatment: Hot Dip Galvanising / Spray Galvanising (Inside)

• Country of Origin: Made in India
• Color: Silver
• Material: Stainless Steel
• Type: Monocrystalline
• Thickness: 12 mm
• Voltage: 240 V
• Frequency: 50 Hz
• Finishing: Polished

Designed to ensure long fluid life. Unique design offers protection against oxidation of thermic fluid. Tangential thermic fluid entry in the deaerator tank ensures good deaeration.

Bladder tanks are usually supplied in one of two configurations and are used to reduce pressure surges in pipelines. The air charge is contained within the bladder inside the tank. The air charge does not come into contact with the liquid in the tank and so cannot be absorbed. Air charge losses due to absorption are therefore not possibel as they have been eliminated. The pumped liquid from the main flows into and out of the main tank, it will come into contact with the tank walls and so compatible materials must be selected. The bladder is often made from a highly elastic rubber, such as butyl rubber, and may be sized to expand to fit the entire vessel. The bladder will typically be pre-charged at installation with a pre-determined pressure to give the correct operating level in the tank when the unit is connected to the main and at the operating pressure. There must be an anti extrusion plate fixed at the outlet from the vessel to prevent the bladder from being drawn into the main at low pressures. The anti-extrusion plate and inlet size must be selected so that they do not impose a restriction on the flow into and out of the vessel, otherwise the unit will not function correctly as a surge tank. Each bladder vessel comes with these standard features: Safety relief valve Pressure gauge Air fill valve Anti-extrusion plate Drain connection Internal bladder (membrane)

Liquid Storage Tanks is made up of high quality insulating material, which separates the space between inner and outer vessel. The tank is double walled and is evacuated to high vacuum to prevent evaporation losses. It is equipped with automatic pressure build-up regulator. Though the gases like oxygen and nitrogen are mainly used as gases but they are stored as liquids because they are easy to store and transport. The design of the liquid oxygen transport tank is solid and easy to operate. The tank is has got two filling points—top end filling and bottom filling. The top end liquid filling decreases the pressure inside the tank and the bottom liquid filling increases the pressure. Pressurizing systems enables you to increase the pressure while unloading liquids into tanks or gas line vaporizers. You can regulate the pressure to ensure there is no significant change of pressure during liquid delivery. Our Liquid Nitrogen transport tank comes in various capacities ranging from 5000 liters to 1, 50,000 liters. Cryogenic liquids like oxygen and nitrogen are stored in the tank with temperature up to (-196°C) with option for low and high pressure.

• Capacity: 1000-5000 L
• Brand Name: Sanghi
• Container Type: Tank Container
• Automatic Grade: Automatic
• Design: Standard

• Country of Origin: Made in India
• Material: Metal
• Color: White
• Storage Capacity: 1500L, 150000 litre onwards
• Usage/Application: Industrial
• Application: Potable Water or Industrial Water Storage
• Storage Material: Water

We are Offering Liquid Storage Tanks . 1. Used for Storing Different Kind of Liquids.

• Capacity: 10.126 m
• Material: Stainless Steel
• Storage Material: Gases
• Brand Name: SES
• Weight: 4130 - 40550 kg
• Transmission Type: Manual

Foam System for Storage Tanks, the area in which FIRETECH provide reliable and dependable solutions. With years of sound experience in designing, Manufacturing, In-House and On-site Testing and Commissioning of wide range of Foam System such as :- 1. Base Injection Foam Systems for Conical Roof Tanks. 2. Foam Maker with Vapour Seal Chamber for Conical and Internal Floating Roof Tanks. 3. Foam Maker with Pourer for Floating Roof Tanks. 4. Automatic Rim Seals Foam Protection for Seal Area of Floating Roof Tanks.

• Material: Stainless steel
• Features: Durable, long-lasting performance, Unique design,
• Warranty: 5 years

gas tanks, Rinse tanks, Steel Water Storage Tank, Spray Tank

Liquid Gases Tanks, Shipping Containers, 40 GP Shipping Container

Stainless Steel Liquid Mixing Tank, SS Open Type Scoop, Powder Sampler

gas tanks, bitumen storage tanks, jacket tank, Stainless Steel Storage Tanks

Gas Holder, Boilers, Gas Turbines, Power Generators, Gas Regulator

chemical industry liquid tanks, Chemical Machinery, horizontal chemical tank