LOBA CHEMIE PVT. LTD. Colaba, Mumbai, Maharashtra

Fan in compliance with ISO 3744; 0 marking. Fan in compliance with ATEX on request. Please contact us. Adaptable to all of our cabinets. Simple and aesthetic fitting. Easy connection between the cabinet and the vent box. Connection by flexible tube Ø 100mm (in option). Lighting control allowing to survey the proper working of the fan. Built in steel 12/10th. White epoxy paint RAL 9010. Steel electric scroll engine installed on silentblocs: - 220/240 volts 50Hz – 55,5 dB(A) - Flow: 215m3/ hour- Protection IP44 - Exhaust inlet and outlet: Ø 100 mm . - Switch ON/OFF with lighting control. - Possibility of flow adjustment thanks to dimmer. This kit allows to connect easily your vent box to your safety cabinet: 1 connection unit Ø 100mm(ref. CHJ) to be fixed on the cabinet air outlet. 1 metre of flexible tube Ø 100 mm (ref. KL100). 2 clamp collars Ø 100mm (ref. CDS100).

In compliance with DIN 4102 (SV50 model). Large warning labels in compliance with ISO 3864, 92/58/CEE European directive and norm NF X08.003. Fan: CE marking. Tested and approved by MPA DRESDEN laboratory. One cabinet for each type of chemical used. Possibility of connection between models (example: toxic + corrosive, see table) except for SV50 model. Especially designed to settle under the bench. Built in steel 15/10th (except SV50 model: built in steel 12/10th + 20 mm mineral fiber insulation). Double wall door in steel 15/10th (except SV50 model: double wall doors in steel 12/10th + 20 mm mineral fiber insulation). Epoxy paint : Yellow RAL 1023 (flammable products SV30 model); Blue RAL 5015 (corrosive products AC30 model); White RAL 9010 (solvent SV50 model, base products BA30 model and toxic products TO30 model). Large warning labels. Adjustable steel retention shelf (corrosive models equiped with retention tray in PVC). Removable steel retention tank (100 mm high) at the bottom of the cabinet (for "Corrosive" model, tank made in PVC). High and low vents Ø 100 mm. Self-closing system of the door (except SV50 model). Doors with key-lock system. Adjustable feet (except SV50 model).

Pesticides are usually poisonous, sometimes flammable or even extremely flammable liquids and can easily cause pollution. That is why national and European regulations (e.g. EurepGAP, Cross Compliance ...) have been set up to protect the ground water and the environment. In order to comply with the legislation and also to protect efficiently our environment, some fundamental rules have to be applied Pesticides must be stored at a reasonable distance from water points, fragile crop, house lots, food (cattle food, vegetables), electrical wires .... .   A Storage area can be either a bungalow, a container, a dedicated protected room or a safety cabinet. These storage areas or safety cabinets must be ventilated (technical or natural ventilation) and lockable. Furthermore, the doors of the cabinet have to open towards the front and they have to be absolutely leak proof (e.g. equipped with a base trough, or a retention tank). The safety cabinets must be unequivocally labeled, clearly marked with the stored product propriety with a normalized pictogram (according to ISO 3864 and the European Guideline 92/58/EEC). In addition, the pictogram should include relevant information (e.g. first-aid recommendations, emergency telephone numbers, indication “open fire prohibited”). First-aid equipment must be in reach ready to be used. According to the law regulating pollution (WHG) and national regulations (they may vary from one country to another), storage must be organized in a manner that it cannot cause pollution. Therefore: Pesticides must not leak from containers or from storage premises. A pesticide cabinet or sump must be equipped with a 100% leak-proof retention tank. It is strictly forbidden to equip a retention tank or sump with a faucet or any other opening device. Also, note that retention tanks should never be used for storage, unless you equip them with a perforated duckboard shelf. Note: in this case, you may use the duckboard shelf as an additional storage shelf. The retention tank must be adapted to the substances to be stored (media resistancy), avoiding alteration of the tank and causing possible leakage within time . The cabinet (or container) must be ventilated (10-fold change of air per hour). The retention tank or sump must contain 50% of the stored liquids, and / or at least the content of the largest container (whatever is greater). In protected areas (if storage is permitted!), 100% of the stored chemicals must be retained in a retention device. Pesticides should be stored in their original container – or marked with all necessary details (e.g. Product name, product specifications, warning signs, S- or R-phrases …). It is very important to store the chemicals separately (by product families: e.g. flammables, hazardous liquids, acids, bases, etc.) avoiding reactions which could cause accidents. The empty containers of very poisonous products should be recycled according to national and local waste disposal regulations.

In compliance with NFPA (National Fire Protection Association), OSHA (Occupational Safety and Head Administration), UL (Underwriters Laboratories) and FM (Factory Mutual internationnal) specifications. Sturdy construction for use in industry. Integrated self-latching handle. Self-closing** or manual doors. Continuous piano hinge provides smooth closure. Various models available. Built in double wall steel with 38 mm of insulating air space. Blue epoxy paint. Adjustable galvanized spillslope safety steel shelves with high density polyethylene (HDPE) shelves trays. Liquid tight containment sump holds leaks on the bottom (50mm heigh). Static ground connection. B24M and B24S models equipped with extra polywork tray. High and low vent Ø 50 mm with grid. Continuous piano hinge. Manual or self-closing doors. 3 points stainless steel bullet latching system. Doors with key-locking system. Additional shelves. Industrial absorbent mats for retention tank (10 pieces by pack) Ref. JF10D.  

Double wall construction:- Outer housing made sheet of steel.- Inner body made of H.P.L. coated sheet (high pressure laminated). Thermal insulation panel between the walls avoiding thermal bridges. Hight quality epoxy coating RAL 9010. Marking as per EN 14470-1. Earthing link. Air inlet and outlet channel in rear panel. Easy connection on the roof of the cabinet Ø 100 mm (labelled as exhaust channel). In case of fire, a thermo-fuse automatically seals off the ventilation system. Thermo-expanding seals of the doors allow keeping the internal body fireproof. Separately locking doors with cylinders locks. Self-closing doors with possibility to keep the doors open. If the temperature rises to 50°C, a fuse link closes the doors automatically.

Adsorption capacity in compliance with NF X 15-211 norm. Large warning labels in compliance with ISO 3864 and NF X08.003 norms, 92/58/CEE European directive. In compliance with the health regulation articles (R5132-66 and R5132-68). Electric fan in compliance with CE specifications. Tested and approved by MPA DRESDEN laboratory. Cabinet delivered ready to use. Independent cabinet ensuring perfect security. Elimination of dangerous vapours. No need of connection to an exhausting system. No modification of building structure required. Easy sight of the stored products. Perforated shelves allowing liquids flow in case of discharge. Ventilation system with lighting control. Window control for presence of the filter adapted to your needs. Control of the saturation level with reactive coded tubes. Specialised high efficiency actived charcoal filter treated following chemical products stored. Dust pre-filter, 92% efficienty with less then 3 µm particles. Easy chane of actived charcoal cell. Built in white malamine-based wood. Large glazed door with framing. 4 perforated shelves adjustable in height. Double air inlet at the bottom. Key-locking system. Drawer/retention tank at the bottom with absorbing mat. Buit in 15/10th steel with white epoxy paint (RAL 9010). Noiseless fan : 220 volts - 50 Hz - 0,2 A - 47 watts; flow: 200 m3/h; IP20 protection, sound level 49 dB(A); delivered with cable and plug.  

Especially designed for acid and bases storage. Built in cellular PVC with a great resistance to vapour aggressions and corrosive liquids. Cabinets with sliding drawers for acid or/and base storage. Large warning labels in compliance with ISO 3864, 92/58/CEE European directive and NF X08.003 norm. In compliance with recommendations of The National Institute for research and Safety at work (I.N.R.S). Tested and approved by MPA DRESDEN laboratory Built entirely in white cellular PVC. "Corrosive", "Base" and "Toxic" large warning labels (only the 3 for APC106 model). Adjustable retention sliding drawers for each major compartment. Independant compartments (except APC31 model) for acid, base or/ and toxic products storage (only for APC106 model). Each compartment is divided in a major and a secondary storage area (except APC61, APC111 and APC221 models). High and low opening vent Ø 100 mm with connecting piece for possible exhaust. Door(s) with lock:-Handling door(s) for APC31, APC91 and APC106 models.-Sliding doors for APC61, APC111 and APC221 models. Adjustable leveling jack feets.