Long Weld Neck Flanges Dealers in Sion, Mumbai

Carbon steel Long Weld Neck "LWN" flange connection is the lightest and most economical of standard connections, typically forged flange connection for the pressure vessel connections where a minimum of reinforcing area is required. These Carbon steel flanges have have a uniform Long Weld Necks barrel outside diameter that provides a nut relief clearance between the connection neck and the nut. Lengths of these Carbon steel forged LWN flanges can be increased to allow for any offset, "hillside" or heads or tangential location attachment on pressure vessel shells etc. Contoured bottoms can be manufactured and supplied on request. We are one India's one of the leading manufacturers of quality Carbon steel Long Weld Neck "LWN" flange connection in a vast range of Carbon steel materials and pressure class covering complete size range as well. All Carbon steel Flange dimensions and drilling are in accordance with ASME B16.5. Bolt holes will straddle natural centerlines, unless specified otherwise. Studs, bolts, nuts, and gaskets are not supplied along with flanges but can be supplied upon special request. All these Carbon steel standard connection flanges over pressure class 300 rating are manufactured and supplied in the normalized condition to fulfill the requirements of ASME Section II. Any other heat treatment requirements, if any, can be done upon request on extra actual cost. We are manufacturers and suppliers of Carbon Steel long weld neck flanges in india from more than two decades. These flanges are being made from carbon steel forgeable solid bars. Looking wise the neck of these flanges is too toll and that is why it is called carbon steel long weld neck flanges.   These flanges are also been called LWNRF Flanges in short name and the complete name of the same is Long Weld Neck Raised Face Flanges. Normally the neck of these flanges varies from 150 mm to 250 mm depending upon it's size and pressure rating being asked by the engineer to suit the project requirement. These flanges can not be manufactured from plates or circles as what in the case of SORF Flanges-Slip on Raised Face Flanges or even WNRF Flanges - Weld Neck Raised Face Flanges because of it's very long neck. These type of flanges are easily being manufactured from the appropriate diameter round bars. In fact this process is economical and viable method to manufactureLong Weld Neck Flanges in Carbon Steel. We are supplying these Long weld neck flanges in export worthy packaging to safeguard the flanges up to site location.   Size range of ASTM A105 Carbon Steel Long Weld Neck Flanges   We undertake the order of these flanges from 1/2" NB to 24" NB and in pressure rating from low pressure 150# to high pressure 2500#.   Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 150 Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 300 Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 400 Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 600 Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 900 Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 1500 Dimensional and weight information of ASTM A105 Carbon steel Long Weld Neck Forged flange Class 2500   Hot Dip Galvanized Long Weld neck Carbon steel Flanges We do manufacture and supply these flanges in hot dip galvanized condition with micron layer certifying self certified certificate to ensure best quality hot dip galvanized forged flanges from our end.   Applications of Carbon Steel Long weld Neck Forged Flanges   Oil and Gas Industries Water and Waste water treatment Plants Ship building Industries Marine Industries Offshore Industries

We offer alloy steel long weld neck flanges in alloy materials. These alloy long weld neck flanges are offered in various diameters and sizes. Long weld neck flanges are machined with the wall thickness of the flange having the same dimensions of the matching pipe. The lighter is the pipe, the larger will be the bore and vice versa. These flanges are equally suitable for high-pressure, cold or hot temperature applications. Materials: Alloy steel long weld neck flange – as long weld neck flange Standard: ASTM A234 WP5 Long Weld Neck Flange ASTM A234 WP9 Long Weld Neck Flange ASTM A234 WP11 Long Weld Neck Flange ASTM A234 WP22 Long Weld Neck Flange ASTM A234 WP91 Long Weld Neck Flange

• Stainless Steel Orifice Weld Neck Flange: Carbon Steel Orifice Weld Neck Flange
• Alloy Steel Long Weld Neck Flange: Duplex Steel Long Weld Neck Flange
• Super Duplex Orifice Long Weld Neck Flange: Incoloy ® Long Weld Neck Flange
• Hastalloy ® Long Weld Neck Flange: Inconel ® Long Weld Neck Flange
• Monel ® Long Weld Neck Flange: Alloy 20 Long Weld Neck Flange
• SS 317L Long Weld Neck Flange: SS 321H Long Weld Neck Flange
• SS 347H Long Weld Neck Flange: SS 310S Long Weld Neck Flange

Stainless steel forged socket weld & screwed fittings & flanges for high temperature services as per astm/asme sa 182 – gr. F304l, 304h, 304ln, 309, 309s, 309h, 310s, 310h, 316, 316l, 316h, 316ln, 317, 317l, 321, 321h, 347, 347h, 348, 348h etc. duplex forged socket weld & screwed fittings and flanges as per astm/asme sa 182 uns no: s31803 (f51), s32750 (f53) & s32205 (f60). Alloy steel forged socket weld & screwed fittings & flanges for high temperature services as per astm/asme sa 182 – gr. F1, f2, f5, f9, f11, f12, f22 & f91. Alloy steel & carbon steel forged socket weld & screwed fittings and flanges for high pressure transmission service as per astm/asme sa 694 gr. F42, f46, f48, f50, f52, f56, f60, f65 & f70. carbon steel forged socket weld & screwed fittings and flanges for elevated temperature services as per astm/asme sa 105. Carbon steel fittings for high pressure transmission services as per astm/asme sa 694 – gr. F42, f46, f48, f50, f52, f56, f60, 65 & 70. Carbon steel forged socket weld & screwed fittings and flanges for low temperature services as per astm/asme sa 350 – gr. Lf1, lf2, lf3, lf5, lf6 & lf9. nickel alloys forged socket weld & screwed fittings and flanges as per astm/asme sb 564 uns no: n04400 (monel 400), n06600 (inconel 600), n08800 (inconel 800), n06625 (inconel 625), n08825 (inconel 825), n10276 (hastalloy c 276) & n02200 (nickel 200). Nickel-alloy socket weld & screwed fittings and flanges as per astm/asme sb 462 uns no: n08020 (alloy 20 / 20 cb 3).

• Size: 1/2 - 24
• Type: Long Weld Neck Flanges
• Material: Alloy Steel, Metal, Mild Steel, Stainless Steel, carbon steel , high nickel alloy , monel , inconel
• Shape: Round
• Thickness: sch 5 - sch xxs
• Application: Gas Fitting, Industrial Fitting, Water Fitting
• Color: Black, Silver
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, Perfect Shape
• Standard: ASTM
• Country of Origin: India

• Brand Name: SKYLAND
• Size: 0-1 inch, 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
• Approx. Price: Rs 1,100 / Piece
• Material Standard: ASTM A105, ASTM A182, ASTM A351, ANSI B16.5

Our packages are designed to provide maximum protection to the product from mechanical damage and logistical jostling. Additionally, the package is labeled to provide important details. Only high quality raw material is used for preparing the offered lot and we make sure that it is sourced from the trusted places and that too after complete quality confirmation.

Long Weld Neck Flanges

ASME Long Weld neck Flanges, ASTM Long Weld neck Flanges, Stainless Steel Long Weld neck Flanges, Duplex Steel Long Weld neck Flanges, Monel and Inconel Long Weld neck Flanges, Compound Steel Long Weld neck Flanges Producer and Exporter in India. ASTM/ASME – A 182, SA 182, ASTM B247, B361, Aluminum Long Weld neck Flanges, Carbon Steel Long Weld neck Flanges, Nickel Composite Long Weld neck Flanges, supplier.With respect to our all around heeled modern experience, Shasan Piping solution offers an aggregate scope of Long Weld Neck Flanges. We give diverse sorts of Long Weld Neck Flanges, for example, Stainless Steel Long Neck Flanges, Carbon Steel Long Neck Flanges, Compound Steel Long Neck Flanges, Nickel Composite Long Neck Flanges, Copper Amalgams Long Neck Flanges, Low Temperature Carbon Steel Long Neck Ribs, Duplex and Super Duplex Steel Long Neck Ribs, and so on. Comes in disparate evaluations, sizes, particulars and models, these neck spines are being supplied from the most-reliable sellers by our specialists. In the interim, these spines are somewhat restrictive for the reason of their uncomplicated network with different channels.Range :½” (15 NB) to 60” (1500NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. available with NACE MR 01-75.Features : Dimensional accuracy High efficiency Corrosion resistance Durable Excellent finish Details : Stainless Steel Standard  - ASTM / ASME A/SA 182 Grade - F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Titanium Standard  - ASTM B381. Grade - Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Duplex Steel Standard  - ASTM / ASME A/SA 182 Grade - F 44, F 45, F51, F 53, F 55, F 60, F 61 Copper Alloy Standard  - ASTM / ASME SB 61 / 62 / 151 / 152. Grade - UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Standard  - ASTM / ASME SB 564 / 160 / 472 Carbon Steel Standard - ASTM A 105/A694/ A350 LF3/A350 LF2. Grade - F42/46/52/56/60/65/70 Low Temperature Carbon Steel  - ASTM A 350 LF2 / A350 LF3 Alloy Steel Standard  - ASTM A182 Grade - F1/F5/F9/F11/F22/F91 Nickel Alloy Standard : Nickel 200 – UNS N02200 Nickel 201 – UNS N02201 Monel 400 – UNS N04400 Monel K500 – UNS N05500 Inconel K600 – UNS N06600 Inconel 601 – UNS N06601 Inconel 625 – UNS N06625 Inconel 800 – UNS N08800 Inconel 800H – UNS N08810 Inconel 825 – UNS N08825 Hastelloy C276 – UNS N10276 Alloy 20 – UNS N08020

We are offering stainless steel long weld neck flanges (wnrf). The long weld neck flange is offered by our company which is manufactured to perfection with the help of the state-of-the-art equipments. Our long weld neck flanges are often used in vessel manufacturing. This product has a shape of a slip on flange with a piece of pipe already attached but are formed and machined in a one-piece construction. The basic ingredients used to manufacture this product are known to be of the best quality which is highly appreciated by our clients. We offer to the clients a wide range of product which is manufactured using the best quality of machines and the latest technology available in the market. These products have a high level of endurance, are very flexible, they are resistant to heat and they are immensely reliable in the market. This product is available in many sizes which are designed to withstand all levels of pressure. Our long weld neck flange is available in many series and has a heavy wall thickness making it ideal for highly corrosive applications. This seamless product is offered in affordable price which is beneficial for our clients. We ensure that the product we offer is put through stringent quality check process which defines its quality to a great extent. features: •durable •hard and sturdy •sophisticated. flanges form : stainless steel astm a 182, a 240 flanges size : 18" nb to 48"nb. flanges class : 150, 300, 400, 600, 900, 1500 & 2500 flanges grade : f304, 304l, 304h, 316, 316l, 316ti, 310, 310s, 321, 321h, 317, 347, 347h, 904l

• Size: 3inch, 4inch, 5inch, 6inch
• Material: Alloy Steel, Mild Steel
• Shape: Round
• Thickness: 10-20mm, 30-40mm
• Application: Water Fitting
• Standard: AISI, BS, GB
• Connection: Welded

We ashapura steel & alloys offer this long weld neck flanges in carbon steel materials. These long weld neck flanges are offered in various diameters and sizes. Long weld neck flanges are machined with the wall thickness of the flange having the same dimensions of the matching pipe. the lighter is the pipe the larger will be the bore and vice versa. These flanges are equally suitable for high-pressure cold or hot temperature applications. • size: 12"nb to 48 "nb in • class : 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs specifications as per the international standard: • astm, asme, api, aisi, bs, ansi, din, jis, mssp, nace materials: carbon steel long neck weld flange – cs long weld neck flanges astm a105 lwnrf flanges . astm a350 lf2 lwnrf flanges

• Brand Name: Maxell Steel & Alloys
• Size: 12"nb to 48 "nb
• Material: Carbon Steel
• Place of Origin: Mumbai  
• Applications: For high-pressure cold or hot temperature applications
• Packaging: Bulk

Carbon steel long weld neck flanges in carbon steel materials. These carbon steel long weld neck flanges are offered in various diameters and sizes. Carbon steel long weld neck flanges are machined with the wall thickness of the flange having the same dimensions of the matching pipe. the lighter is the pipe the larger will be the bore and vice versa. These flanges are equally suitable for high-pressure cold or hot temperature applications. Size: 12"nb to 48 "nb in class : 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs specifications as per the international standard:astm, asme, api, aisi, bs, ansi, din, jis, mssp, nace

• Material: Stainless Steel
• Feature: Durable, Corrosion Proof, High Tensile
• Usage: Industrial & Fittings
• Surface: Polished
• Technics: Hot Dip Galvanized
• Grade: Standard
• Quality: Best
• Resistivity: Rust Resistant
• Durability: Long Life
• Packaging: Bulk