LT Cast Steel Valves Dealers in Girgaon, Mumbai

• Brand Name: Maxell Steel & Alloys
• Usage: for isolating or regulating floW
• Place of Origin: Mumbai  
• Unit: Trader
• Product Type: Butterfly Valves
• Packaging: Bulk

A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball.

• Material: Stainless Steel
• Type: Manual
• I Deal In: New Only
• Media: Gas,Fuel,Powder/Solids
• Temperature Of Media: High Temperature
• Operation Type: By Lever,By Gear,By Motor,By Actuator
• Is It Customized: Customized
•  :  

• Material: iron steel, stainless steel, etc.
• Size: NPS 2-52"
• Operations: Lever, worm-gear, electric, pneumatic and hydra-pneumatic.
• Characterstic: Fire safe design

• Material: Stainless Steel
• Specialities: Heat Resistance, Blow-Out-Proof
• Construction: Wafer Type
• Power: Hydraulic
• Media: Water
• Temperature: Normal Temperature

We are one of the most prominent Butterfly Valves suppliers of India. Stainless steel butterfly valves available with us are simply unmatched for their quality. The industrial butterfly valves available with us are manufactured using the best raw material available in the market. Our butterfly valves are high on the durability factor and are widely praised in the market for this quality. Our valves meet all the standards of the industry are available in different sizes as per the requirements of the customers. Body : SS 304, SS 316 or SS 316L (cast or forged) Handle : SS3 04 Solid bar with phenolic knob for 4 position. Nylon 6 + reinforce glass fiber handle with SS 304 gripper bar or all SS 304 handle for 12 position. Seat: Silicone, EPDM and Viton is available Operation : Available for pull handle 4 position and gripper handle 12 position. Range of control systems : Available for air actuators, micro switches, solenoids...etc. Size : Usually 1" - 4", any size is demandable. Fitting ends : BS, DIN, SMS, 3A, Weld ends, Male ends and Clamp ends. Working pressure : -0.9 to 10 Bar for cast body. -0.9 to 20 Bar for forged body. Working temperature : -10 o C up to 150 o C. Disk head size : 9.4 x 9.4mm available for cast & forged body. 8 x 12mm, 12 x 12mm available for forged body. Safety : 100% 6kgfcm 2 air or 25kgfcm 2 hydraulic and 300k times cycle test.

We source and supply a quality range of Butterfly Valves that is designed to stop or slow air or product flow by means of a turning disk. Further, these can be used in gravity flow or pneumatic systems, and can have manual or pneumatic actuators. We use very sophisticated techniques while manufacturing these products so that the total performance is guaranteed. Available in various specifications, these Butterfly Valves can also be custom made as per the clients specific requirements. Butterfly Valves offered find application in isolation, throttling and control processes that make these suitable for fluids like toxic gases, air, water, vacuum, acids, slurries, combination of gases & solid, chemicals and LPG.Further, as these are compact as well as lighter in finish, these valves feature lower operating time as well as smooth and easy operations. The specifications these can be made available in include design standards of AWWA-C504 / BS-5155, size range of 50mm to 2000mm and pressure class of 150 Class.Further, we can also offer these in other customized manufacturing standards, design choices, sizes, dimensions as well as material choices as demanded by the customers.

• Operating Type Range: 25o C to 200o C (depending on MOC)
• Size Range: 40NB to 1200 NB

Butterfly Valves Seat liner extending on to the contact faces ensures perfect sealing and eliminates the use of flanges gaskets.Unique triple sealing system for sheft sealing and prevents extemal substances from entering the stem bore.A fully universal body design ensure fitments of the Valves between companion flanges of all standards (viz : ANSI, BS, DIN, JIS, IS etc.)Take less space than ball Valves.

• Usage: Industrial
• Finish: Polished
• Thickness: 20-30 mm, 40-50 mm
• MOQ: As Per Customer Needs
• Condition: Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
• Type: Seamless, Welded, Fabricated, ERW

• Material: Cast Iron, Stainless Steel
• Type: Rack and pinion type
• Power: Manual, Hydraulic
• Pressure: 520 Kpa, 1000 Kpa
• Media: Air, Water, Gas, Fuel
• Port Size: 6cm - 20 Cm, 21cm - 50 Cm, 51cm - 60 Cm

With the assistance of our streamlined packing system, we are able to meet the customized and standard packing requirements of the clients. Moreover, clients can stay rest assured for the safety of the products from our end. We are supported by a well-managed and automated warehouse system wherein we store the entire lot in a secured manner. The automatic handling, storage and distribution of the goods thus become an ease.

• Pressure Rating: ASME 150# to 2500#, API 3000PSI to 20000PSI
• Feature: Blow-Out-Proof, Durable
• Dimension Standard: API 600/BS1414, API 598/BS EN 12266-1, ASME B 16.10, ASME B 16.5, ASME B 16.25, ASME B 16.34
• Size: 2” up to 56“ (DN 50 up to DN 1400) Custom Sizes available on request
• Design Standard: API 600/BS1414, API 598/BS EN 12266-1, ASME B 16.10, ASME B 16.5, ASME B 16.25, ASME B 16.34
• Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

We offer the best quality Butterfly Valves that are made with high quality raw materials. Butterfly Valves, that we offer, are widely used in various applications. These corrosion resistant Butterfly Valves are in extensive demand everywhere, owing to their precision engineering and robust construction.

Butterfly Valves We offer Butterfly Valves as under : Grade : SS 304 / SS 316 Specifications: Size: 3/8" to 24" Pressure: : 150 lb to 2500 lb

A butterfly valve is a shut-off valve with a relatively simple construction. In closed position, the disc blocks the valve bore while in open position, the disc is turned to allow flow. A quarter turn takes the valve from fully open to fully closed position, or opposite, and thus the butterfly valve allows for quick opening and closure. Butterfly valves can be used for a broad range of applications within water supply, wastewater treatment, fire protection and gas supply, in the chemical and oil industries, in fuel handling systems, power generation etc. Some of the advantages for this type of valve are the simple construction not taking up too much space, and the light weight and lower cost compared to other valve designs. The valves can be operated by handles, gears or actuators according to any specific need. Main design of butterfly valves     The butterfly valve can be centric or eccentric. On a centric (concentric) butterfly valve the stem is centered in the middle of the disc and the disc centered in the bore. The eccentric butterfly valve has one or more stems (stub shafts) located offset from the center according to the categories of single, double and triple offset valves.     Butterfly Valves Butterfly Valve components: The butterfly valve consists of only four main components: body, disk, stem and seat. Butterfly valve body: Butterfly valves generally have bodies that fit between two pipe flanges, the most common being lug and wafer body design. Butterfly valve disk: The disk is how the valve stops flow – it is equivalent to a plug in a plug valve, a gate in a gate valve or a ball in a ball valve. There are variations in disk design and orientation in order to improve flow, sealing and/or operating torque. Butterfly valve Stem: The stem of the butterfly valve may be a one-piece shaft or a two-piece (split-stem) design. The stem in most resilient seated designs is protected from the media, thus allowing an efficient selection of material with respect to cost and mechanical properties. Butterfly valve Seat: The seat of a resilient-seat butterfly valve utilises an interference fit between the disk edge and the seat to provide shutoff. The material of the seat can be made from many different elastomers or polymers. The seat may be bonded to the body or it may be pressed or locked in. Butterfly valves are easy and fast to open. A 90° rotation of the handle provides a complete closure or opening of the valve. Large Butterfly valves are usually equipped with a so-called gearbox, where the handwheel by gears is connected to the stem. This simplifies the operation of the valve, but at the expense of speed. Butterfly valves are relatively inexpensive to build. Butterfly valves require less material due to their design. The most economical is the wafer type that fits between two pipeline flanges. Another type, the lug wafer design, is held in place between two pipe flanges by bolts that join the two flanges and pass through holes in the valve’s outer casing. Furthermore, common Butterfly Valves materials are often less expensive. Butterfly valves have less space requirements. This is due to their compact design which requires considerably less space, compared to other valves.

We are prominent & leading channel partner from mumbai, we offer butterfly valves such as resilient seated - series 2021 valve, resilient seated - series 2223, resilient seated - series 3031 butterfly valves, resilient seated - series 31h butterfly valves, resilient seated - series 31u butterfly valves, resilient seated - series 3a3ah butterfly valves and many more items.

We put forth Industrial butterfly valves for our customers, which are appreciated for their corrosion resistant and strong attributes. These are manufactured as per the demands and requirements of the customers and are made in accordance with the stipulated guidelines of the industry. We offer these products in sound packaging material, which ensures that they reach the client's in damage-free condition.

• Material: Cast Iron
• Power: Manual
• Media: Air, Gas, Water
• Country of Origin: Made in India
• Brand: Riton Metal
• End Connection: Wafer Type Design
• Operator: Lever
• Surface Treatment: Galvanized
• Valve Size: Upto 300 mm

• Material: Stainless Steel
• Type: Wafer
• Technics: Hard Sealing
• Power: Manual
• Pressure: 1000 Kpa
• Structure: U Section
• Port Size: 6cm - 20 Cm

• Pressure Rating: Class 150, 300, 600 & 800
• Type: Center Disc, Ecentric Disc
• Size: 50mm to 1000 mm
• Body Material: WCB, CF8, CF8M, Alloy 20
• End Connection: Flanged End / Screwed End / Butt Weld End
• Optional: Trunnion Motorised Ball, Manual Gearbox or Motorised Operation
• Design & Mfg. Standard: BS 5351

ACE ALLOYS LLP is one of the major manufacturers, suppliers and stockholders of Butterfly valves. Our Butterfly Valves gives high performance to the wide range of applications like cooling water, air, gases, fire protection, compressed air or gas applications etc. It is less costly compared to other valves. Butterfly valve is a rotational motion valve that requires quarter-turn. A butterfly valve consists of a disc mounted on a rotating shaft. Once the valve is completely closed, the disk blocks the line. The disc is at a right angle to the flow, when the butterfly valve is fully opened. Butterfly valves are of different types like Eccentric Butterfly Valve, Flanged Butterfly Valve, Lugged Butterfly Valve, Wafer Butterfly Valve, and Butt Weld Butterfly Valve Butterfly Valve Specifications: Depending on Butterfly valve construction material, they have high resistance to chemicals. They can even handle temperatures up to 200 °C. The materials may be Steel Butterfly Valves, Alloy Steel Butterfly Valves, Aluminium Butterfly Valves, Brass Butterfly Valves, Bronze Butterfly Valves, each adapted to different pressures and different usage.  We, at Ace Alloys LLP, make sure to provide the best material according to the client’s specification. Our company is well equipped with all kinds of resources for successfully meeting the demand of its products. Contact us today to get the best value price for butterfly valves..