M/s Mahesh Electrical Instruments LBS Marg, Mumbai, Maharashtra

Core Porcelain Tube, Non-Magnetic Non-Inductive Tubular Type. 2) Contact Block : Squire piece made of material is fitted with contact sliders in the guide squir rod. Bright chrome plated Phosphor bronze strip which makes immediate contact with the guide rod. A backlite knob is fitted with squire piece for sliding up and down. 3) Guide Rod : Solid draven brass rod bright chrome plated squire. 4) Contact Material : Multiple brushes of Phosphors bronze strip rolled strip give springy action to the contacts. Winding Wires : Eureka wire for low value and nichrom wire 80/20 grade for higher values. Temperature rise : 200oC above ambient temperature High Voltage Test : 2 KV A.C. for 1 minute between end support and any one of 3 wires terminals of the wire. End supports : Aluminium brackets painted. Terminals : Bright Chrome plated brass nuts and screws one at each end of Leaneer Type Wire-Wound Resistor  and the third one at both the side of guide rod. All Electrical Connectors are made from chrome plated brass material. Rotary Sliding Rheostate, Double tube and Multiple Tubes, Non-Standard values, wattage on specific request, Available from 100 Ma to 100 Amps 0.3 ohms to 25 Kohms.

We provide a huge range of high quality Analog Wattmeter that is extensively used to compute DC power during load. Our Dc Wattmeter is highly acknowledged for its brilliant quality and accurate reading. Available in varied specifications, our wattmeter can be customized as per the demand of the client. We are counted among the preeminent Wattmeter Manufacturers and suppliers in India.

Weight : 100-200gm

Voltage : 240 V

Automatic Grade : Automatic

Power Source : Electric

Feature : Durable, Light Weight, Low Power Comsumption, Stable Performance

Warranty : 1Year

We have carved a niche as one of the dominant Variac Variable Transformers Exporters from India. VARIAC Auto Transformers 1 Ph. (Closed / Open type) are designed to give output voltage of 260-270 Volts for the input voltage of 240 Volts. 3 Phase VARIAC Auto Transformers are designed to give output voltage of 470 Volts for input 415 Volts. These are available in manual and motorized operating type. Variac Auto Transformers are continuously variable voltage auto transformer, having a movable carbon tip, fixed to a brush-arm sliding on a silver plated commutator. Rotation of the brush-arm by either manual or motor drive, delivers-an output voltage from zero to or above line voltage. Variac conforms to I. S. 5142 of 1969. SALIENT FEATURES: RUGGED CONSTRUCTION: Variac transformer is designed for heavy duty trouble-free operation. All components are designed to give maximum life to the unit under extreme operating conditions. Except, for carbon tips, no other part needs any specific maintenance. Even carbon tips do not require to be changed frequently. This practically makes the VARIAC maintenance free electrical equipment. EXCELLENT REGULATION: The drop in voltage from "no load to full load" is minimal in Variac Auto-transformers. HIGH EFFICIENCY: Careful copper, core selection and design assure the user of low watt loss, as compared to other types of controllers. NO WAVE FORM DISTORTION: VARIAC provides an output voltage wave-form, which is a faithful and distortion less replica of the input voltage wave-form. SILVER PLATED COMMUTATOR: A special silver plating technique is used on the commutator enabling it to withstand high overloads and maintain constant contact drop. It also ensures smooth operation, long life and increased resistance to corrosion. LOW OPERATING TORQUE: A glass smooth commutator, special sintered bushings for the shaft and perfect assembling of the coils, results in low operating torque for all Variac Auto-transformers. SMOOTH AND LINEAR OUTPUT: As voltage between turns is small and as the brush-arm is in constant contact with more than one turn, harmful sparking is avoided and output voltage can be set very easily to a fraction of a volt from zero onwards by rotation of the knob. LOW MAGNETIZING CURRENT: By using an adequate section of high quality grain oriented silicon steel, the iron losses in Variac, are controlled to the minimum, The no-load current in all Variac transformers, is invariably less than 5% of the rated current. NEGLIGIBLE MAINTENANCE AND TROUBLE-FREE LONG LIFE: Variac has been carefully designed. No special care has to be taken to maintain Variac Auto-transformers in-normal- working environments. The only components needing inspection and maintenance are the carbon tips and the commutator. Timely replacement of carbon tips and cleaning of the commutator surface of foreign particles and accumulated dust, will ensure a considerably long, maintenance-free, and uninterrupted life to the unit. Normally Variac Auto-transformers upto 28 Amps. are offered in air-cooled or oil cooled construction and models of 40 Amps. and above, are offered in oil-cooled construction in very special cases, Variacs of 40 Amps. & above can be offered in air-cooled construction. This is possible due to the new paralleling techniques adopted by us.

ME manufacture L.T Transformers in different types and capabilities to suit individual requirements.    These are manufactured both in natural air cooled construction and natural oil cooled construction. In addition to the above other types of transformers are i) Voltage Auto Transformers ii) Current Transformers.These are described in our various leaflets. Special Enquiries will always be entertained with promptness,by our Engineering and sales staff. The transformers described in this catalogue are made in natural air cooled and oil cooled construction, suitable for indoor use in a maximum ambient temperature of 45oC. The electrical performance of these transformers generally confirms to the requirements of I.S. specification No. I.S. 2026 for power Transformers. Natural Air Transformers are supplied in sheet steel ventilated case with screwed top cover. Input and output terminals are provided on the top of the transformer, inside the casing. The transformers are suitable for floor mounting and are also supplied with M.S. rollers for easy portability. Natural oil cooled transformers are supplied in M.S. Tanks. As a standard practice the tank is provided with oil filling hole with cap, oil level indicator drain plug and earthing terminal. Input and Output terminals are brought out generally on the top side of the tank. Extra off-load taps can be provided on request. The capacity of the transformer at the tap will be proportionately low corresponding to the tap voltage. The declared capacity will hold good only for the highest voltages on both input and output, unless the taps are specified as full capacity taps.   Three Phase Double Wound Transformers.These generally are manufactured in Delta/Star or Star/Delta connections. Extra off-loads can be provided on request. A typical vector with winding connections is as shown below.

Weight : 100-1000kg

Frequency : 50hz

Warranty : 1 year

Material : Metal

ME manufacture L.T Transformers in different types and capabilities to suit individual requirements.    These are manufactured both in natural air cooled construction and natural oil cooled construction. In addition to the above other types of transformers are i) Voltage Auto Transformers ii) Current Transformers.These are described in our various leaflets. Special Enquiries will always be entertained with promptness,by our Engineering and sales staff. The transformers described in this catalogue are made in natural air cooled and oil cooled construction, suitable for indoor use in a maximum ambient temperature of 45oC. The electrical performance of these transformers generally confirms to the requirements of I.S. specification No. I.S. 2026 for power Transformers. Natural Air Transformers are supplied in sheet steel ventilated case with screwed top cover. Input and output terminals are provided on the top of the transformer, inside the casing. The transformers are suitable for floor mounting and are also supplied with M.S. rollers for easy portability. Natural oil cooled transformers are supplied in M.S. Tanks. As a standard practice the tank is provided with oil filling hole with cap, oil level indicator drain plug and earthing terminal. Input and Output terminals are brought out generally on the top side of the tank. Extra off-load taps can be provided on request. The capacity of the transformer at the tap will be proportionately low corresponding to the tap voltage. The declared capacity will hold good only for the highest voltages on both input and output, unless the taps are specified as full capacity taps.

Frequency : 50hz

Phase : Single Phase

Warranty : 1 year

RLC LOAD BANK Specifications for RLC Load (Resistive, Inductive and Capacitive Load (Three load bank in Single Unit))   RESISTIVE LOAD BANK Single Phase & Three Phase, 240 Volts Single Phase & for 415 Volts For three Phase, AC, 50Hz Capacity :- From 1 KW/4Amps upto 10KW/40 Amps Per Phase Switches :- Heavy duty Rotary type Switches are used for steps (varying Load)   INDUCTIVE LOAD BANK, 3 Phase Single Phase & Three Phase, 240 Volts Single Phase & for 415 Volts For three Phase, AC, 50Hz Capacity :- From 1 KW/4Amps upto 10KW/40 Amps Per Phase Switches :- Aluminum Handle/Knob is provided for varying Load.   CAPACITIVE LOAD BANK Single Phase & Three Phase, 240 Volts Single Phase & for 415 Volts For three Phase, AC, 50Hz Capacity :- 1 KW/4Amps upto 10KW/40 Amps Per Phase Switches :- Heavy duty Rotary type Switches are used for steps (varying Load)   The RLC Load Bank is provided with UNI-DIRECTIONAL Castor wheels for easy handling.   Approx. Dimensions (Length X Width X Height) :- 70" X 20" X 35" Approx. Weight :- 130-150 Kg

Type : Load Banks

Condition : New

Frequency : 50hz, 60hz

Cooling System : Air Cooling

Warrenty : 1year

Brand Name : ME

Country of Origin : India

Operating Temperature : 0 To 70 Degree C

Frequency : 50hz, 60hz

Feature : Rugged design, High performance, Smooth finish

We unveil a large gamut of high performance Power Factor Meter that is highly appreciated in the national and international market. Our Analog Power Factor Meter provides accurate true-rms metering values and readings. We have firmly positioned ourselves as one of the supreme Voltage Power-Factor Meters Exporters from India.

Voltage : 230 V

Body Material : Plastic

Frequency : 50/60 HZ

Application : Laboratory,Industrial

Display Type : Analog

Frequency : 50HZ

We provide a huge array of superior quality Potential Transformer that is manufactured from the finest quality raw materials. Our Power Potential Transformer is highly acclaimed in the national and international market for performance and durability. We are well renowned as one of the overriding Ac Potential Transformer Exporters from India.

We have carved a niche as one of the distinguished Portable Voltmeter Manufacturers and Exporters from India. ME Portable meters can be moving coil, Moving Iron or dynamometer type and have method of indication by means of deflecting pointer only. These instruments are manufactured to meet the requirement of IS 1248/83. Construction: Our AC & DC Portable type Ammeter & Voltmeter are manufactured by the best quality material to give satisfactory performance over a long period. ME Portable Flow Meter is mounted on bakelite panel fitted in New Pine wood case with rubber footing and rexine strap provided with anti-parallax mirror and knife-edge pointer The moment is fitted on the bakelite panel. The moment is secured between two saffire jewels. The precisely ground pivots are been used for minimizing the friction and sustain accuracy in vigorous field condition. The effective oil damping provides uniformly control torque and brings the indicating pointer to its final deflecting position without much oscillation. All the metal parts are adequately plated to suit the tropical condition. Instruments are effectively shielded from external magnetic effects and electrostatic influences. All the instruments have zero setting devices in the front except power factor meters. Application: ME Portable Meters are used for the measurements of the electrical quantities like current, voltage, Power (Active , Reactive) or the power factor of the network.

Voltage : 220V

Driven Type : Electric

Warrenty : 1 Year

ME Portable meter can be moving coil, Moving Iron or dynamometer type and have method of indication by means of deflecting pointer only. These instruments are manufactured to meet the requirement of IS 1248/83. CONSTRUCTION : All the instruments are manufactured by the best quality material to give satisfactory performance over a long period. ME Portable meters are mounted on bakelite panel fitted in New Pine wood case with rubber footing and rexine strap provided with anti-parallax mirror and knife-edge pointer.The moment is fitted on the bakelite panel. The moment is secured between two saffire jewels. The precisely ground pivots are been used for minimizing the friction and sustain accuracy in vigorous field condition. The effective oil damping provides uniformly control torque and brings the indicating pointer to its final deflecting position without much oscillation.   All the metal parts are adequately plated to suit the tropical condition. Instruments are effectively shielded from external magnetic effects and electrostatic influences. All the instruments have zero setting device in the front except power factor meters. APPLICATION : ME Portable Meters are used for the measurements of the electrical quantities like current, voltage, Power (Active , Reactive) or the power factor of the network.   q

We stand in the midst of ecstatic Phase Indicator Manufacturers and exporters, based in India. Our Phase Sequence Indicator is a portable and sturdy instrument having a rotating disc to indicate the sequence of the phases of 3 phase power supply. Clockwise rotation of the rotating disk of the PSI indicates proper sequence. Anti clock wise rotation indicates improper sequence. Electronic Phase Sequence Indicator provided by us is useful for checking the sequence of phases when the same are to be connected in proper sequence watt meters, power factor meters, motor and similar applications.

Application : Industrial

Display Type : Analogue

Weight : 800 Gms (approximately)

We provide an ample range of panel meter that includes both Analog Panel Meter and Voltage Panel Meter. We are counted among the supreme Panel Meter Manufacturer and Exporters from India. General Information: - ME AC & DC Panel type Ammeter & Voltmeter panel meters are used on switch board motor and control gears and control panels for a measurements of electrical quantities like current , voltage, power ( Active , Reactive ) or the power factor of the meter These are light in weight and their construction permits them to left connected/wired in the circuits for continues use because of their negligible power loss and rugged construction. These instruments can be moving coil, Moving Iron or dynamometer type and have method of indication by means of deflecting pointer only. These instruments are manufactured to meet the requirement of IS 1248/83. Construction: - All the instruments are manufactured from the best quality material to give a satisfactory performance over a long period. These instrument either in Square Flush type, Round Flush type equipped with the dust & moisture proof casing. 144 Sq. mm Flush , 96 Sq. mm Flush , 72 Sq. mm Flush and 2.1/2 Round Flush , 4 Round Flush meters of moving iron, moving coil type have bakelite or ABS moulded case, base., these instruments are supplied with white dials and black scaling in order to easy legibility. The stamping is also adequate enough to read from reasonable distance. The moment is light in weight and is effectively secured between two saffire jewels. The precisely ground pivots are been used for minimizing the friction and sustain accuracy in vigorous field condition. The effective oil damping provides uniformly control torque and brings the indicating pointer to its final deflecting position without much oscillation. All the metal parts are adequately plated to suit the tropical condition. Instruments are effectively shielded from external magnetic effects and electrostatic influences. All the instruments have zero setting devices in the front except power factor meters. Calibration:- The quality control and inspection at every stage of manufacture at our works enables the meter to pass the Time Test. The qualified staff and the expert supervisors calibrate each and every instrument individually for the finest accuracy. The scaling and marking of the instrument are strictly as per the specified standards. The accuracy is corresponding to full scale deflection and is very effective up to 1/5th of the full scale deflection in moving iron meters and up to 1/10th of he full scale deflection in moving coil and dynamo meter type instruments.

Weight : 100-200gm

Voltage : 220 V

Display Type : Digital

Frequency : 50Hz-65Hz

Power Source : Electric

Feature : Light Weight

Warranty : 1Year

We are counted among the ecstatic Micro Ohms Meter Manufacturers and suppliers, based in India. ME Ohms Meter is a sensitive, portable, self-contained, battery operated, moving coil type of ohms meter. The anti parallax mirror scale and knife-edge pointer in the Volt Ohms Meter provide accurate readings. PRESS TO READ switch avoids Battery drain. An infinity adjustment potentiometer helps to provide accurate readings without effect of variations in battery voltage. Mechanical zero adjuster is provided to adjust zero.

Accuracy : ± 5% of the Indicated Value At Center Scale.

Weight : 700 Gms. (approximately)

Application : Industrial

We are counted among the distinguished L.T. Power Transformers Manufacturers In India. ME manufacture L.T Transformers in different types and capabilities to suit individual requirements. The leaflet describes following types Single Phase Double Wound Transformers Three Phase Double Wound Transformers. L.T. Current Transformers are manufactured both in natural air cooled construction and natural oil cooled construction. In addition to the above other types of transformers are i) Voltage Auto Transformers ii) Current Transformers. These are described in our various leaflets. Special Enquiries will always be entertained with promptness, by our Engineering and sales staff. The transformers described in this catalogue are made in natural air cooled and oil cooled construction, suitable for indoor use in a maximum ambient temperature of 45oC. The electrical performance of these transformers generally confirms to the requirements of I.S. specification No. I.S. 2026 for power Transformers. Natural Air Transformers are supplied in sheet steel ventilated case with screwed top cover. Input and output terminals are provided on the top of the transformer, inside the casing. The transformers are suitable for floor mounting and are also supplied with M.S. rollers for easy portability. Natural oil cooled transformers are supplied in M.S. Tanks. As a standard practice the tank is provided with oil filling hole with cap, oil level indicator drain plug and earthing terminal. Input and Output terminals are brought out generally on the top side of the tank. Extra off-load taps can be provided on request. The capacity of the transformer at the tap will be proportionately low corresponding to the tap voltage. The declared capacity will hold good only for the highest voltages on both input and output, unless the taps are specified as full capacity taps. Three Phase Double Wound Transformers. These generally are manufactured in Delta/Star or Star/Delta connections. Extra off-loads can be provided on request. A typical vector with winding connections is as shown below.

Frequency : 0-50Hz

We are well reckoned as one of the supreme Electrical Load Banks Manufacturers and Exporters from India. ME Load Banks are single phase and three phase variable Lamp or resistor or capacitor or Induction load housed in metal case as shown in the diagram. Our Portable Load Banks are provided with castor wheels (except Induction Load) for easy handling. Ammeters and Voltmeters are provided on the front panel to indicate the current and voltage respectively. Also heavy-duty Porcelain switches with bakelite top and inner brass contact or Anchor Switches or MCBs (As per the load capacity) are provided for safety. For Mains ON, MCB is provided. The Load Banks are used to simulate load conditions to test Voltmeters, Ammeters and Wattmeters. Load can be simulated by using the load switches provided on the bench. Total load simulated is sum of the loads of all 'ON' switches. The pictures shown are a three in one unit comprises of Capacitor, Induction and Resistor loads (in order) in single Load Bank. Load Type:- In resistance Load Bank Resistor wire as per required capacity is wound on the porcelain tube; in the same manner Bulbs are provided for bulb load bank (LAMP Bank) and Capacitor are provided for Capacitance load bank. Induction Load Bank is smoothly variable, core balance type inductive load. In this type, the load is increased or decreased by increasing or decreasing the air gap between the coils. In this Rotating knob is provided on the top of the panel for operating the air gap. Operating:- Before switching on the load bank, put all load switches in 'OFF' position. In induction load bank, keep the Coils in closed position, Switch on the Load Bank. Switch on the load switches one by one till the required load is simulated. For Induction Load Bank rotate the knob to increase the air gap and current will start increasing smoothly. Load Voltage & Load Current will be indicated on the Voltmeter & Ammeter respectively on the panel.

INTRODUCTION : ME Load Bank is a single phase and three phase variable Lamp or resistor or capacitor or Induction load housed in metal case as shown in the diagram. It is provided with castor wheels (except Induction Load) for easy handling. Ammeters and Voltmeters are provided on the front panel to indicate the current and voltage respectively. Also heavy-duty Porcelain switches with bakelite top and inner brass contact or Anchor Switches or MCBs (As per the load capacity) are provided for safety. For Mains ‘ON’, MCB is provided.  The Load Banks are used to simulate load conditions to test Voltmeters, Ammeters and Wattmeters. Load can be simulated by using the load switches provided on the bench. Total load simulated is sum of the loads of all 'ON' switches. The pictures shown is a three in one unit comprises of Capacitor, Induction and Resistor loads (in order) in single Load Bank. LOAD TYPE :- In resistance Load Bank Resistor wire as per required capacity is wound on the porcelain tube; in the same manner Bulbs are provided for bulb load bank (LAMP Bank) and Capacitor are provided for Capacitance load bank. Induction Load Bank is smoothly variable, core balance type inductive load. In this type, the load is increased or decreased by increasing or decreasing the air gap between the coils. In this Rotating knob is provided on the top of the panel for operating the air gap. OPERATING :- Before switching on the load bank, put all load switches in 'OFF' position. In induction load bank, keep the Coils in closed position, Switch on the Load Bank. Switch on the load switches one by one till the required load is simulated. For Induction Load Bank rotate the knob to increase the air gap and current will start increasing smoothly. Load Voltage & Load Current will be indicated on the Voltmeter & Ammeter respectively on the panel.   SPECIFICATION : INPUT MAIN VOLTAGE                :           230/415V AC.VOLTMETER RANGE                    :           0-300/500V AC.AMMETER RANGE                       :           5 - 100A AC.LOAD RANGE                             :           1-25 KW.LOAD TYPE                                :           Bulb / Resistance / Capacitor / Induction Load

ME Radio Frequency Meter is a vibrating reed type meter that is highly demanded in the market. Our Analog Frequency Meter is very elegant and compact. We stand in the midst of preeminent Frequency Meter Manufacturers and Exporters from India.

Weight : 800 Gms.(approximately)

Application : Industrial

Quality is one aspect on which we can never compromise. And, for this, our personnel work hard and ensure that the entire lot complies with defined quality norms. Placed in Mumbai(India), we share space with the top-notch Suppliers, domestically and offer top-of the line array of in the market.

DC Motors  Micro DC Motors  AC Motors  Synchronous Motors  Battery operated DC Motors (EV & Hybrid EV Motors)  Ge* Geared Motors  Wound Field DC Motors (Sepex)  Dynamometers / DC - Tacho Generators Drives :-   DC Drives.  Chopper Controllers.  Control Panels.  UPS Systems.  Electronic Generators- Inverters.  Semi-Traction Motors.  Diesel Generators.  Equipments for Educational Institutes, Engineering colleges IIT's & ITI's.  Educational type DC Motors.  Cut section AC / DC Motors.  Slipring Induction Motors.  Alternators & DC Generators.  AC to DC M-G set.  DC to AC M-G set.  Repulsion Motors.  Synchronous machine Motor- Alternator sets.  Identical DC Shunt Machines set for Hopkinson test.  Identical DC Series Machines set for Field test.  DC Starters.  Field regulators for DC Shunt/Compound motors & generators.  DC Variable speed drive system with Dimmer control and DC Variable speed    drive with Thyristor control.  DC Machine trainer set with Dynamo.  DC Machine trainer set with Eddy Brake.

  ME Mini Portable Desk Model Meters are inclined for easy reading & mounted on    black ABS plastic moulded desks.  Panel Meters AC & DC are mounted on a black plastic moulded Desks  Meters of 65mm Round, 72Sq.mm. / 96Sq.mm are provided.  The Meters are provided with Insulated terminals for safety.  The Metes can be used in Educational Institute Laboratories and Industries.  

Input Supply - 230V + 10% AC 50Hz. Outputs 220V @ 1A for field0 to 220V for Armature @5A for 1HP@8A for 2HP@12A for 3HP@20A for 5HP   Power On/OFF switch for all and Start/Stop push-buttons for 3 & 5 HP Speed control – by closed loop voltage feedback system Speed Adjustment – by means of single turn Potentiometer with dial on Panel Indicators – Neon/LED type for Power ON, Motor ON and Overload Trip Meters – Output DC Voltage and DC Current, size-72 X 72Protections -   Input Glass fuse for 1 & 2HP and MCB for 3 & 5HP  Glass fuse for field and control,   Electronic Field Fail Relay, Electronic Overload,   Current Limit, Snubber for Diodes and Thyristors,   Electronic Soft-Start to avoid inrush current   Surge suppressor networkCabinet – M.S. fabricated and duly powder coated, wall mounting typeSize - 320mm x 225mmW x 175mmD for 1 & 2 HP400mm x 350mmW x 175mmD for 3 & 5 HP NOTE : DC DRIVE WITH DIMMERSTAT CAN BE PROVIDED e 

We stand in the midst of leading Direct Current Shunts Manufacturers, based in India. ME Dc Shunts are available for current ratings from 5-10000 Amps and mill volt drops of 75 milli volts. (Other voltage drops can be provided at request) The Shunts confirms to IS Standards 1248 ME Dc Ammeter Shunts consist of Mangenin rods soldered or silver brazed to brass end blocks. The shunts are artificially aged after manufacture and then tested on full load. Shunts are supplied with leads of 0.025 ohms. The lead resistance is taken into account while calibrating the shunt. Overload: Shunts are capable of withstanding temperatures upto 120 C without any permanent alterations in physical or electrical properties. Overloads and faults which results in temperatures of this magnitude can be safely handled All 75 milli volts drop shunts of class 1, withstand the following overload Requirements : 2 X rated current for 3 minutes. 4 X rated current for 30 seconds. 10 X rated current for 5 seconds. Temperature Co - Effecient : 0.002% per degree centigrade, above ambient temperature in still air, with free ventilation. Temperature not exceeding 120°C at the center and 90°C at the ends.

Material : Metal

Application : Industrial

An ample assortment of high quality Dc Electric Motors is provided by us. We are well reckoned as one of the major Dc Motors Manufacturers and Exporters based in India. Our Dc Gear Motors are manufactured from the finest quality raw materials to add durability and efficiency. Some of the salient features of our Dc Electric Motors are listed below: Low noise operation Minimize EMI Maintenance free Compact size and rugged structure High power density Low consumption of electricity

Weight : 40-50kg

Voltage : 220V

Power : 1-3kw

Driven Type : Electric

Speed : 1000-2000rpm

General Description: The ME Dc Power Meter measures the DC energy consumed by a DC load. Our battery operated Dc Voltage Meter is very useful for the measurement of energy consumption of DC motors etc. We have carved a niche as one of the supreme Dc Energy Meter Manufacturers and suppliers, based in India.

Weight : 100-200gm

Color : White

Voltage : 220 V

Display Type : Digital

Frequency : 50Hz-65Hz

Automatic Grade : Automatic

Body Material : Plastic

Power Source : Electric

Warranty : 1Year