M/s.propack Technologies Pvt. Ltd. Ghatkopar, Mumbai, Maharashtra

All stainless steel 304 316 316L CGMP or mild steel externals with stainless steel internals (vapor and product contact parts), Hollow pad type heating shelves which are easily removable for maintenance, Condensor and condensate receiver fitted on the dryer body or stand alone for remote installation, Fully welded skirt on vacuum dryer body for flush mounting through the wall,M External insulation of dryer with protective panels in stainless steel or mild steel powder coated,M Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid.for temperature requirements above 95 degree centigrade.

Tray Size : 16 x 32 x 1.25 (h) inches

All Contact Parts Made Out of SS 316 SS 316 L Quality Material Conforming to cGMP norms, All pipelines are electro - polish from inside and joints are easy openable & fitting after cleaning, Complete Lid lifting arrangement to facilitate cleaning and product change over, interlocked with safety device so that anchor stirrer statrts onllllly when lid closed, Intensive mixing by special smi - contra design anchor stirrer avoiding dead zones. Contra Rotary Stirrer for Tooth Paste., Variable Speed drive provided for main anchorstirrer asembly for different speedsVariable Speed drive provided for main anchorstirrer asembly for different speeds, All transfer are done under vacuum to avoid any hand touch & Contamination. (complete untouched process, Bottom Entry angular homogenizer provided to ensure proper emulsification & homogenization of the produc, Product Recovery System : for recovering final product from pipelines and helps in easy cleaning.

Sugar Charging Done Under Vacuum (Complete untouched Process). All transfers done under Vaccum,M Can be equipped with CIP & SIP facility and Load Cell for online weighing, PLC Based control pannel for process automationAll Contact Parts Made Out Of SS 316 (cGMP Model). All pipelines are electro-polishfrom inside and jointsare DIN Standard easy openable & fitting after cleaning, Inline filters to ensure filteration. Bucket filter and sparkler filter press provided, Bottom entry Angular CROWEL TYPR IMPELLER for Uniform mixing.

All Contact Parts Made Out of SS 316 SS 316 L Quality Material Conforming to cGMP norms, All pipelines are electro - polish from inside and joints are easy openable & fitting after cleaning, Complete Lid lifting arrangement to facilitate cleaning and product change over, interlocked with safety device so that anchor stirrer statrts onllllly when lid closed, Intensive mixing by special smi - contra design anchor stirrer avoiding dead zones. Contra Rotary Stirrer for Tooth Paste, Variable Speed drive provided for main anchorstirrer asembly for different speeds, All transfer are done under vacuum to avoid any hand touch & Contamination. (complete untouched process). Bottom Entry angular homogenizer provided to ensure proper emulsification & homogenization of the product.Forced homogenization in the mixing vessel or upon emptying, Bottom homogeniser is provided with double cartridge mechanical seal with TCTC seal face, with cooling water arrangement for the mechnical seal and water detection sensor to trip the motor if the fow of water to the mechanical seal is stopped, ensuring thorough safety of the seal due to its high speed application, Transfer (Lobe) pump provided to transfer ready product from main mfg.Vessel to storage or filling area, Digital metering pump provided for transrring exact volume of cream from stprage vessel to hopper of tube filling packaging machine.

Pure Sterile, Pyrogen free distilled water conforming to IPBP Standards,Energy Saving-Low Operating Cost.Fully Automatic Operation.,N Compact Design-Saving Space.installation, All contact parts are S.S. 316 and all joints are sealed with Teflon gasket.

Pure Sterile, Pyrogen free distilled water conforming to IPBP Standards, Energy Saving-Low Operating Cost, Fully Automatic Operation,M Compact Design-Saving Space.installation, All contact parts are S.S. 316 and all joints are sealed with Teflon gasket.

The Liquid Manufacturing Plants are ideal tools for the pharmaceutical industry and food industry for the production of Oral Liquids. All manufacturing activities are activated from the control room. Liquid manufacturing is a completely closed process, having minimal operator's physical involvement in materials additions. Transfer of material from vessel to another is through vacuum. These equipments are having on-line homogenizer.

These vessels are manufactured from high alloy S. S. AISI 316 Quality, Material Test Certificates will be provided.,A pressure relief valve is provided.

All the product contact parts are made from Stainless Steel corresponding to 304, Non-contact parts and outer surfaces made from Stainless Steel corresponding to 304, All doors, safety guards and covers are provided with a suitable food grade seals Pan speed 1 to 15 RPM, The pan speed is variable and can be changed from the control panel, Perforated pan with more than 55% opening for better quality finish. The pan is cylindrical in shape and is made out of stainless steel sheet, The middle portion of the pan is perforated, having 2.5 mm. diameter holes, to enable hot air to enter the pan while in rotation, Tablet discharging facility will be through the special diverter assembly, A stainless steel 304 sink at bottom of pan for collection of powder with necessary stainless steel piping with tri-clover joints for ease of cleaning during the change over,N The coating pan along with the drive system, hot air plenum, exhaust plenum, pan washing sink, washing pipe line etc. are housed in a stainless steel cabinet, Fluorescent Light is provided for illumination in side the pan. LHS and RHS wall of the machine will be double insulated to prevent the heat lose.