Magnetic Machine Dealers in Mumbai

Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different.   Features High intensity. High garden, high power rare earth magnets Available with flanges to suit square and round chutes Available with angle deflectors above and between the tubes for heavy contamination Direct access to magnets in chute Easily installed and extremely easy to clean

Detailed Product Description TCDX-220 MT detector,handy magna tester, has no power controller, direct contact with 220110V power, convenient carrying.Elevating power >6kg, Polar distance: 10-200mm adjustable.

• Brand Name: Ultra-Shine

Ultra-Shine™ Magnetic Polishing Machine is a special process which increases your productivity with reduction in cost and improvement in quality. Key Features: * Deal tumbler for finishing gold and platinum jeweleries * Polishing can be done in very short time * High speed rotation of the Magnet disc. * Powerful magnet which gives good torque * Timer, Clockwise and Anti-Clockwise rotation * Mirror finish shine * No pin marks on the pieces * Long lasting shine * No maintenance required * Mainly used for polishing the precious metals * Powerful, Reversible and reliable. * Long service life time. * Reasonable factory-direct price * Optional barrel size * Digital display showing time & Rotating direction * 2800 RPM (Rotation Per Minute) Process: The casted pieces are put in the Magnetic Pin-Polishing Machine. In few seconds, the surface of the pieces will become smooth and the pieces will be polished without any actual metal loss. Note: Ultra-Shine™ recommends Ultra-Shine™ - MTG-9 (Magnetic Polishing Liquid) for deriving maximum result from Magnetic Polishing.

This is a sturdy fabricated body vibrator polisher with full stainless steel body specially designed for gold jewellery polishing using stainless steel media such as balls, cross pins, pointed pins, etc mixed with water and jewellery cleaning compound. Its equipped with a sturdy single phase AC electric motor. The vibrator polisher is available from 12kg upto 8 kg jewellery cleaning capacity and supplied complete with suitable cleaning solution, shampoo and suitable S.S. media of mix type

We offer magnetic jewelry polishing machine is ideal for fine polishing of gold casted diamond studded rings and similar jewelry. this is a programmable magnetic polisher having auto reverse forward operation with digital display. The machine is powered by sturdy suitable single phase motor and fitted with excellent quality magnets to provide maximum force for better polishing quality and for long life. these magnetic polishers are available in 12kg, 1kg and 2kg jewellery cleaning capacity having bowl size from 8" upto 12" for 2kg capacity. The machine is supplied complete with suitable magnetic media, cleaning solution and shampoo. kindly ask for more details.

• Automatic Grade: Manual
• Power: 1-3kw

• Certifications: CE Certified
• Weight: Approx 25 Kg
• Motor Output: 1150 Watts
• Cutter Capacity: 50 Mm Depth
• Twist Drilling: 18 Mm
• Stroke: 160 mm

This "Magnetic Polisher' can polish the finer details & recess-er on silver, gold and platinum. Powerful magnets inside the tumbler base cause miniature steel shot rods to spin around the jewellery in forward & reverse direction.   We are looking for export inquiries from South Africa. It is available in two versions i.e. manual and microprocessor controlled:  Manual version has manual forward / reverse direction switch & timer Microprocessor version has programmable controller which takes care of forward/ reverse direction.

Magnetic Drilling Machines

• Type: Magnetic Machine
• Application: Cutting Tools
• Weight: 100-200kg, 200-300kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric, Hydraulic, Mechanical

• No Load Speed: 950 min -1 (rpm)
• Frequency: 50/60 Hz
• Phase: Single Phase
• Power Source: 220-240 V
• Rated Power Consumption: 1100 W
• Rated Current: 10.2 A,5.1 A
• Magnet Power Consumption: 34 W
• Magnet Holding Power: 7,056 (720) N (kgf) / 1583 lbs.
• Magnet Dimensions: 3-5/8" x 8-1/2"
• Mass Weight: 44 lbs.

FULL WAVE CONTROL ELECTRONICS The electronic control ensures continuous adaptation of the motor output to the load during drilling. The advantages are high performance at low speed and a steady sequence. If load peaks should be too high, the electronic torque control will be activated in order to prevent tool breakage and avoidable damage. An active contribution to employee safety with machines.   AUTOMATIC INTERNAL LUBRICATION Cutting oil where it is required. This principle always ensures the exact amount and even distribution over the entire cutting area. No dry running and overheating of the drill, no excessive use of coolant. Tool service life and work results will be significantly improved.   OIL BATH GEARBOX KB Industries offers a wide range of highly efficient magnetic core drilling machines with powerful and durable motors. The spectrum ranges from 800 W to 2,300 W. They are designed for the high performance requirements of the magnetic core drill technology.  KB Industries manufactures machines with multi-stage gearboxes, which are completely embedded in oil. KB Industries magnetic core drilling machines are robust and reliable.   CARBON BRUSH WEAR CONTROL The machines of the Profi-PLUS class are provided with a new visual wear control for the carbon brushes. By replacing the worn carbon brushes in time, you will protect the motor of your machine from damage.   SAFE ARRANGEMENT OF SWITCHES The large switches for motor and magnetic power are separated and safe to handle, i.e., confusion is impossible and accidents are prevented. Thanks to the construction of the switch, unintended actuation of the motor switch is prevented.   INTERNAL CABLING KB Industries Magnetic Core Drilling Machines are safe to handle. Due to internal cabling, cables are protected against tearing-off.   MAGNET AND MAGNET INDICATOR The load configuration and the reserves of the electromagnet are exactly adapted for the performance of the respective magnetic core drilling machine. The user is informed by a visual control. LED green: The magnetic adhesion meets the minimum requirements. LED red: The magnetic adhesion is not sufficient, because it is reduced due to low material thickness or a coat of lacquer, forge scale or zinc.    

Broachcutter Magnetic Drilling Machines have unique design of drill motor body and slide integrated into single cast and machined body part. This unmatched feature offers advantage of increased cutter life ( Upto 150% ) and fewer chances of break downs compared to most other Magnetic Drilling Machines using nut-bolt joints.

• Brand Name: Rotabroach
• No Load Speed: Low Gear 70-200 RPM / High Gear 180-500 RPM
• Drilling Diameter: 16mm
• Twist Drill Capacity: 75x75mm deep- 26mm with MT drill
• Width: 214mm
• Model Name/Number: Element 75/1,Element 75/3
• Warranty: 6 months
• Power Consumption: 110V/1800W / 230V/1800W
• Weight: 23kg

Fully automatic-having Forward & Reverse motion, which is managed by Programmable Controller. Used for Prime Polish. Fantastic Speed range of 2800 RPM. Gives Bright Finish to Jewellery. Polishes hard-to-reach areas where hand & tools can't reach.

Mumbai Tattoo, Tattoo studio in mumbai, tattoo ink supply, tattoo artist mumbai, tattoo course in mumbai, tattoo machine, Tattoo studio in mumbai, buy tattoo machine, tattoo wholesale supplies, tattoo equipments, Tattoo studio, tattoos equipment in mumbai, tattoo ink supplier in india, Stingray Tattoo Machine, tattoo machines, tattoo gun kits, tattoo gun machine, tattoo gun in mumbai, tattoo wholesale supplies, professional tattoo guns, professional tattoo machines, tattoo machines, tattoos equipment in mumbai, tattoo machine wholesale, professional tattoo kit, Tattoos supplies Magnetic Mini Tattoo Power Supply DC: 1.5A-18V output Magnet Led power supply tattoo strong LED lights to make the voltage regulator more intuitive, Palm-sized mini-shape is extremely space-saving easy to carry, Regardless of daily stores or exhibitors are more ideal and practical Mumbai Tattoo Color: Orange & Black Model No.:18 V-1.5A Material:Metal Product Length (In CM):18 Product Width (In CM):15 Product Height (In CM):6 Product Weight( in gms):300 SUPC: SDL347630059  

• Model: SWC 35, SEC 50, SWC 100 WT
• Warranty: 2 years
• Brand: SCHIFLER
• Is It Variable Speed: Non Variable Speed