Magnetic Stirrer Bath Dealers in Jogeshwari, Mumbai

• Application: Industrial
• Temp. Ranges from: 50 to 300 ± 5 Degrees Celsius
• Circulation: Efficient Motor of 1440 Rpm Top Mounted is Installed for Stirring to Get Temp Uniformity.
• Heaters: S. S. Tubular Heaters for Maintaining of Temp. 
• Temp. Control: Digital Temp Controller Housing all the Controls, Switches with Pt-100 Sensor.
• Special Care: A Suitable K. V. A. Servo Controlled Voltage Stabilizer is Recommended.

We manufacture and supply digital oil bath. Double walled outer mild steel and stainless steel & Inner S.S.304 argon welded digital oil bath is supplied with thermostat.  Applications : Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C Laboratories & to suit the various IS standards   Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top..   Refrigeration System : Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40ºC / -70ºC, Refrigerant CFC Free.    Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller.    Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards.    Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor.

The company is a well-known Laboratory Magnetic Stirrer Manufacturer and Supplier, based in India. The Laboratory Magnetic Stirrer, offered by us, is a Table Top Two Tier Model. The outer body of Laboratory Magnetic Stirrer is made of Mild Steel with powder coated finish. Top compartment of Laboratory Magnetic Stirrer is made up of Stainless Steel, embedded with heating element with high-grade insulation. The Laboratory Magnetic Stirrer has an electrically operated energy regulator with an in-built electronically operated speed control regulator for stirring with corresponding indicators. Nichrome / Kanthal make long-lasting heating elements of Laboratory Magnetic Stirrer, along with cera wool insulation. Surface Temperature : Up to 300 degree C

We are the one stop shop in market for availing the best quality Low Temperature Water Bath. Low Temperature Water Bath, which we provide, is user-friendly and gives hassle-free performance. The Low Temperature Water Bath is known for its compliance with the highest quality standards. Low Temperature Water Bath can be availed from us at the leading market prices. Why Our Low Temperature Water Bath? User-friendlinessDimensional accuracyDurabilityIn compliance with the highest quality standards

• Temperature Range: Above amb. to 80.0°C
• Bath Material: Bath Inner made of S. S.
• Temperature Control: Digital Temp Controller
• Flask Capacity: 250 mI x 6 nos
• Speed Control: Stepless speed control for magnetic stirrer from 200 to 1000 RPM Individual speed control.

Microprocessor based, digital shaking baths for gentle heating with agitation for your samples. Easy to clean stainless steel chamber, equipped with clamps that keep samples in place avoiding the risk of spills. Basic specification : capacity: 50 litres temperature range: rt+5°c to 99°c outer dimension: 705x515x470 mm platform dimension: 380x300 mm power: 1600 w

• Warranty: 1 year
• Hot Plate Surface: Stainless Steel
• Shape: Square Shape Top Plate
• Display Type: LED
• Material: Corrosion Resistan
• Brand: Remi
• Speed Control: Regulator
• Capacity: 2 litre
• Speed Display: Available
• Model Name/Number: 2MLH
• Stirring Positions: Single
• Speed Range: Up to 1200 RPM

Microprocessor ControlThe MS-400 hot plate magnetic stirrer is operated by a digital control CPU. The CPU regulates the heating up to 400 °C Hot Plate.Digital Speed ControlStirring speed is also controlled by the CPU from the keypad while the stirring speed is indicated on the bar graph. ProgramableOperator can setup the objective temperature, hold temperature, stirring time and speed.Automatic Temperature Control.

We are a reliable Manufacturer, Exporter & Supplier of Viscosity Bath. The Viscosity Bath offered by us is used for highly stable viscosity bath temperatures. The Viscosity Bath comes with a digital measurement and display. We offer Viscosity Bath that is sturdy, durable, and efficient and offers reliable performance. The Viscosity Bath can e availed from us at competitive price. Construction & Working A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirringTo further enhance the input, the unit accommodates up to a maximum of six individual capillariesThe HVB features a measuring range of 5oC to 230oC and can be used with mineral oil, silicone oil, or water as the bath media. Bath temperature is displayed on a bright, easy-to-read digital display.The unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media Features Measures kinematic viscosity of petroleum products at temperatures from 20oC to 150oC, according to ASTM D 445; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978Accommodates up to six capillary tubes; optional Cannon-Fenske or canon- menin tube holders availableDigital bath temperature measurement and displayControls bath temperature with ±0.01oC stabilityIntegral over-temperature and low bath level protectionLarge capacity bath with built-in stirrer, optional illumination Optional Vacuum Gauge attachment accessories‘U’ tube clamp made up of acrylic polycarbonate materialOn demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost. Our technology is fully controlled, easy to handle, user friendly, intelligent and reliableGlass ‘U’ calibrated tube of any type

The "generally" Hot Water Bath is used for Short Term and Long Term hydro-static pressure testing. Generally, incase of Hydro-Static test For HDPE, R-PVC, C-PVC, MDPE & LATERAL PIPES, the test specimen suppose to be tested either at room temperature or at highertemperature in water bath as per IS & ASTM STANDARDS.The Reversion Oil Bath Tester is use to determine reversion characteristics of R-PVC pipe as per immersion method of IS-12235 (Part - V) standard.

• Voltage: 230 V AC
• Automation Grade: Automatic
• Material: Mild Steel
• Capacity: 500 Ml
• Dimensions: 255 x 185 x 165 mm
• Maximum Temperature: 300 Degree Cel
• Size (Water Bath): Dia.135 x 90 mm
• Feature: have built-in Timer with PID Temperature Controller,Unique Design, Non-stop (day & night) Stirring, Forward and Reverse Options

• Power: 1400 W
• Capacity: 6 L x 3
• No. of Holes: 3
• Temp. Range: RT+5°C to 50°C (Low Temp); 40°C to 70°C (Medium Temp); 60°C to 99°C (High Temp)
• Timer Range: 0-99 hr 59 min
• Catalog No.: 9501371470

DETAILS • Digital PID controller. • Digital display. • Internal material made up of seamless stainless steel. • External material made up of powder coated steel plate. • Stainless steel lid. APPLICATION Labocon Three Hole Water Bath LWTB-100 Series is extensively used for warming reagents, serological research, protein analysis, molecular biology, genetic studies.

Easy to adjust and operate, our oil baths provide excellent temperature uniformity and smooth working for various laboratory test procedures. It reaches a maximum of 300ºc and operates safely for all your samples. Basic specification : capacity: 13 litres temperature range: rt±5°c to 300°c temperature accuracy: 0.1°c temperature uniformity: 0.5°c outer dimension: 550x380x300 mm

Energy Regulator Adds level of boiling control to Circular and Rectangular, multiplace series of Boiling Baths Simple to use control, robust and reliable)Small footprint Non slip feet

Water Baths, biochemical oxygen demand incubator, Heating Mantles

Magnetic Stirrer, Apparatus, PLATES, Laboratory Muffle Furnaces

• Brand Name: Adarsh
• Type: TB-400 Ambient upto 400 deg C (DRY BATH),TB-600 Ambient upto 600 deg C (DRY BATH),TB-250 upto 250deg
• Condition: New Good
• Feature: Easy to use,Superior strength,Durable nature,Longer life service,Low maintenance
• Place Of Origin: Mumbai
• Delivery Time: 1 week (MIn.)
• Payment Mode: T/T & other
• Approx Price: Rs. 34,000 / Piece
• Min. Order Quantity: 1 Piece

With the valuable help of adroit team of experts, we are offering an extensive range of Temperature Bath.

Magnetic Stirrer, Blood Bank Equipment, Walk In Freezer, shaker machine

Water Bath, Lab Instrument, Fluid Bed Dryer, liquid handling products

scientific instrument, Analytical Instrument, Laboratory Glassware