Mangalam Enterprise Orlem, Mumbai, Maharashtra

Zero insertion force (ZIF) is a type of IC socket or electrical connector that requires very little force for insertion. With a ZIF socket, before the IC is inserted, a lever or slider on the side of the socket is moved, pushing all the sprung contacts apart so that the IC can be inserted with very little force - generally the weight of the IC itself is sufficient and no external downward force is required. The lever is then moved back, allowing the contacts to close and grip the pins of the IC. ZIF sockets are much more expensive than standard IC sockets and also tend to take up a larger board area due to the space taken up by the lever mechanism  

A Zener diode is a diode which allows current to flow in the forward direction in the same manner as an ideal diode, but also permits it to flow in the reverse direction when the voltage is above a certain value known as the breakdown voltage, "Zener knee voltage", "Zener voltage", "avalanche point", or "peak inverse voltage".  

All Types of WASHER 1.WASHER 2.SPRING WASHER

A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector. The 15-pin VGA connector is found on many video cards, computer monitors, and high definition television sets.

Printer cable refers to the cable that carries data between a computer and a printer. There are many different types of cables

A USB hub is a device that expands a single USB port into several so that there are more ports available to connect devices to a host system.

Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices

An uninterruptible power supply, also uninterruptible power source, UPS or battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. A UPS differs from an auxiliary or emergency power system or standby generator in that it will provide near-instantaneous protection from input power interruptions, by supplying energy stored in batteries, supercapacitors, or flywheels. The on-battery runtime of most uninterruptible power sources is relatively short (only a few minutes) but sufficient to start a standby power source or properly shut down the protected equipment.

Transistors are active components and are found everywhere in electronic circuits. They are used as amplifiers and switching devices. As amplifiers, they are used in high and low frequency stages, oscillators, modulators, detectors and in any circuit needing to perform a function. In digital circuits they are used as switches.

Timers are used whenever electrical equipment must be periodically switched on and off at preprogrammed daily or weekly times. The programmed events are then repeated during the next periods accordingly. They find broad application in heating and refrigerating systems, boilers, ovens, dryers, defrosting equipment, swimming pools, hatcheries, illumination, etc.

The wire may be wrapped directly under the head of a screw, may be held by a metal plate forced against the wire by a screw, or may be held by what is, in effect, a set screw in the side of a metal tube. The wire may be directly stripped of insulation and inserted under the head of a screw or into the terminal. Otherwise, it may be either inserted first into a ferrule, which is then inserted into the terminal, or else attached to a connecting lug. which is then fixed under the screw head.

As telephonic connection in use for line code & coil code for the 6IN - 6 CONNECTER (6P6C) OR 4IN - 4 CONNECTER (4P4C). As i have branded quality of this product and goods are qty ex-stock.

A trademark for a waxy, opaque material, polytetrafluoroethylene, employed as a coating on cooking utensils and in industrial applications to prevent sticking. The Teflon wire in any kind of measurement we can provide best quality of teflon wire.

All Types of LIGHTS 1.CFL 2.Street LIGHTS 3.LED LIGHTS An electric light is a device that produces light by the flow of electric current. It is the most common form of artificial lighting and is essential to modern society, providing interior lighting for buildings and exterior light for evening and nighttime activities. Most electric lighting is powered by centrally generated electric power, but lighting may also be powered by mobile or standby electric generators or battery systems. Battery-powered lights, usually called "flashlights" or "torches", are used for portability and as backups when the main lights fail. The two main families of electric light are incandescent lamps, which produce light by a filament heated white-hot by electric current, and gas-discharge lamps, which produce light by an electric arc through a gas. The energy efficiency of electric lighting has increased radically since the first demonstration of arc lamps and the incandescent light bulb of the 19th century. Modern electric light sources come in a profusion of types and sizes adapted to a myriad of applications.

A solid-state relay (SSR) is an electronic switching device that switches states when an external voltage is applied along its n-type and p-type junctions. SSR has a small control signal that controls a larger load current or voltage. It consists of a sensor which responds to an appropriate input (control signal), a solid-state electronic switching device which switches power to the load circuitry, and some coupling mechanism to enable the control signal to activate this switch without mechanical parts. The relay may be designed to switch either AC or DC to the load. It serves the same function as an electromechanical relay, but has no moving parts. Solid-state relays are composed of semiconductor materials, including thyristors and transistors. Solid-state relays have current ratings that extend from a few microamps for low-power packages up to around a hundred amps for high-power packages. Solid-state relays have extremely fast switching speeds usually ranging between 1 to 100 nanoseconds. Solid-state relays are not easily affected by contact wear. Solid-state relays have several shortcomings: a high susceptibility to damage (a relatively high vulnerability to overloads in comparison to electromechanical relays); limited switching arrangements (SPST switching); a need for finer tuning due to high "on" resistances.  

The soldering iron use in soldering of electronics components. The soldering iron come in different brand in different quality. I am always offer good quality of solder iron to my client.

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces

Feature : Faster, more efficient, and cheaper

A serial cable is a cable used to transfer information between two devices using a serial communication protocol. The form of connectors depends on the particular serial port used

A rotary switch is a switch operated by rotation. These are often chosen when more than 2 positions are needed, such as a three-speed fan or a CB radio with multiple frequencies of reception or "channels".

The rocker switch use for on/off the product as well as we are haveing many different type of rocker switch like plain rocker switch, led light with indicate rocker switch. The rocker switch is in different voltage & different amp so, we need your requirement as per we give rocker switch.

Robotics is the interdisciplinary branch of engineering and science that includes mechanical .... The electrical aspect of robots is used for movement (through motors), sensing (where electrical signals are used to measure things like heat, ..... In both of these cases, making hand gestures would aid the verbal descriptions.

*GENERAL DESCRIPTION The ORD213 is a small single-contact reed switch designed for general control of low-level loads less than 24 V. The reed contacts are sealed within the glass tube within inert gas to maintain contact reliability. FEATURES (1) Reed contacts are hermetically sealed within a glass tube with inert gas and do not receive any influence from the external atmospheric environment. (2) Quick response (3) The structure comprises the operating parts and electrical circuits arranged coaxially. Reed switches are suited to applications in radio frequency operation. (4) Reed switches are compact and light weight. (5) Superior corrosion resistance and wear resistance of the contacts assures stable switching operation and long life. (6) With a permanent magnet installed, reed switches economically and easily become proximity switches. APPLICATIONS: 1> Automotive electronic devices. 2> Control equipment. 3> Communication equipment. 4> Measurement equipment. 5> Household appliances.